Should Nanfeng always turn on the computer?

On southerly days, the computer should be turned on frequently. Keep the computer used for one hour every day, and use the high temperature generated by the computer operation to disperse the water vapor and keep it dry.

South China is very humid and needs more maintenance to keep the computer running normally.

Tips for computer moistureproof:

1, a few hours a day, using the hot and humid work. The best way is to turn on the computer often, preferably for one hour every day, and use the high temperature generated by computer operation to disperse the water vapor and keep it dry. For those computers that are not often used, it is recommended that you open the case, stick several bags of desiccant in the food bag on the inner wall with double-sided tape, and then cover the dust cover in time, which can basically avoid the interference of water vapor.

2. Try to avoid the chassis touching the ground and walls. Many users like to put the chassis directly on the ground and pad it with foam or something. In fact, it is the easiest way to get the chassis wet. If your chassis is placed on the ground or near the ground and walls, remember to put it on the desktop when wet weather comes, preferably in a well-ventilated place to avoid getting the computer wet.

3. If you are not a regular computer user, you can open the computer case and put desiccant around it. Stick a few packets of desiccant on the inner wall of the chassis. Put a big dehumidification box outside the monitor. Cover it with a dust cover when not in use.

4. If it is found that the humidity is high, you can start the dehumidifier indoors, blow the back of the cabinet or the monitor with a hair dryer for a while, and then turn it on.

5. In humid weather, those exposed interfaces may not work properly because of humidity. So, if you don't use the socket, you can use a dry buffon to hold the socket. Note that it is best to use the socket once in a while.

6. If the monitor is blurred when turned on, it will be clear in about 5- 15 minutes. If the machine is turned off and turned on again after cooling, the failure phenomenon reappears, and the picture tube holder is oxidized by moisture; Just change the picture tube bracket, which is less than ten yuan and can be used for about two years.

7. Make sure that the computer is properly grounded, because it is not properly grounded, which is particularly easy to cause the fuselage to be charged. Don't underestimate this little static electricity, it is also likely to destroy the computer.

8. Use activated carbon, moisture-proof bags or moisture-absorbing boxes. We can open the side panel of the chassis and stick the activated carbon or adsorption bag inside the chassis with adhesive tape, which can effectively prevent the interior of the chassis from getting wet, and the effect is very good. Because it is inconvenient to put the moisture-absorbing box in the chassis, but it looks beautiful, we can put the moisture-absorbing box next to the monitor, which can protect our computer in all directions and use it with confidence.