Traditional Culture Encyclopedia - Weather forecast - Manicure magic mirror powder practice course

Manicure magic mirror powder practice course

Step of applying magic mirror powder to manicure 1

1, evenly brush the polished mask with primer, thoroughly dry it, and then apply Bo Tu's favorite nail polish.

2. Apply a washable sealing layer, and then light the lamp for about 30 seconds.

3. Dip a small amount of magic mirror powder with a sponge brush and gently press it on the nail surface in the way of Bo Tu.

4. Rub the nail surface up and down with a cotton swab after applying evenly until a smooth mirror effect appears.

5. Gently brush off the excess powder with a brush.

6. Apply reinforcing glue, seal and light the lamp until it is dry.

The second step of applying magic mirror powder to nails

Two-color gradient magic mirror powder manicure steps

1. Brush the primer and cure according to the lamp. Brush a uniform layer of black nail glue on the nail surface and press the lamp to cure. To make the color fuller, brush it again and cure it according to the light ~

2. Brush a layer of disposable sealant on the nail surface and cure it according to the lamp.

Tips: Magic mirror powder is more intuitive to use on disposable sealing layer than directly on colored glue.

3. Tap the bottle head against the rear edge of the nail surface a few times, apply a proper amount of magic mirror powder on the nail surface, and gently pat the nail surface with a sponge stick to make the color transition natural.

Tips: Because it is a two-color transition gradient, do not apply magic mirror powder directly on the nail surface during operation to prevent the color from being difficult to transition naturally.

4. Similarly, apply a proper amount of magic mirror powder of other colors to the outer edge of the nail surface, gently pat the nail surface with a sponge stick to make the color transition naturally, and then apply magic mirror powder of two colors to the nail surface to make the nail surface fuller ~

5. Lightly sweep the excess floating powder on the nail surface, then brush a layer of matte seal, and press the lamp to cure.