Imitation porcelain weather

Personally, I think latex paint is better.

Although scratch-resistant porcelain is out of date, it also contains some harmful ingredients. Although it's cheap, it won't work well in the future, and it won't wipe off when it's dirty. Moreover, the temporary wall decoration is particularly easy to tear off when it is removed, and the place with yang angle is dark and uneven, which can not achieve the decorative effect at all. As a temporary rental house, it can be considered that the cost is cheaper.

Although the price of latex paint is much higher than that of anti-porcelain, it is not a level thing in itself. Latex paint is stain-resistant, and it can be lightly rubbed when it is dirty. In decoration, different colors can be configured according to different styles in the home to achieve better decoration effect. Why not? This must be your own new home. Only when you clean up beautifully can you live comfortably. No one will pretend to be okay. It is best to put it in place once, keep it for seven or eight years, and change it when you don't like it.

As for the process, don't be afraid of trouble. When you see the final effect, it will be worthwhile to work hard again.

Simply put:

1, before brushing, batch putty is added and polished, generally twice putty is polished twice. The wall should be scraped flat, not powdered, and polished in place to make it smooth and delicate.

2. After the wall is dried, when the PH value is less than 10, the primer should be brushed once, and the top coat should be brushed twice after at least 2 hours, with an interval of at least 2 hours on each side. The primer can be polished when it is dry, but it can't be polished after painting the top coat.

3. Emulsion paint should be diluted with water in proportion, generally 10-20% (volume ratio). Stir thoroughly after adding water. After stirring, keep quiet until 20 minutes before Zhong Ziran defoams.

Acceptance: 7 days is the curing period. After 7 days, the paint film is full and smooth, with consistent lines and colors, without cracking, peeling, powder dropping, color spots, frosting, yellowing, light spots, gloss loss and sagging. , in order to be qualified.