What is the impact of Jiangmen anti-static floor construction in high temperature weather?

With the arrival of hot weather in summer, most provinces and cities in China will have high temperatures above 35℃, and the temperature under direct sunlight will be higher. For epoxy floor paint industry, the best construction temperature is 10-30℃. High temperature will have a bad effect on the construction of epoxy floor paint. There will be quality problems if you don't pay attention. Through rich construction experience, Diyi Construction summed up the following problems frequently encountered in high temperature weather construction:

1, wrinkle. When the temperature is too high, the drying speed of the inner layer and the surface layer of floor paint is different. At high temperature, the coating surface will dry quickly, shrink sharply and fold up, resulting in wrinkles.

2, foaming. Some floor paint materials contain substances that automatically decompose and release gases. When the temperature is too high, the gas in the coating has not been released, and the coating has solidified, leaving gas in the coating and forming bubbles.

3. Pits and pinholes. The gas in the floor paint can be released to the outside of the coating through the coating film, but the solvent has basically evaporated, and the viscosity of the coating is too high, so the pores caused by bubbles cannot be eliminated automatically.

The basic reason why high temperature has a bad influence on floor construction in summer is that high temperature makes the curing speed of floor paint too fast and the construction progress can't keep up. Therefore, the summer floor paint coating construction should avoid the high temperature period at noon and mix the paint several times at a time. In addition, personnel should be increased to speed up the construction.

65438+

2. When painting at high temperature in summer, the difference color will be clearer, and gray and blue may appear more, so it should be fully stirred before use;

3. When the temperature is too high in summer, it should be used as soon as possible after batching, usually within 30 minutes to avoid material condensation;

4, using artificial cooling measures to reduce the construction environment temperature;

5. In order to ensure the relative humidity of the construction environment, the construction site can be artificially humidified;

6. After the construction, the site should be attended by special personnel to avoid shrinkage cracks of epoxy floor due to high temperature.

It is recommended that Jiandiyi, a high-tech enterprise with 0/8 years of professional floor knowledge, is engaged in R&D, production, construction and engineering installation of modern industrial workshops and floor coatings.

The main engineering services contracted are as follows:

1, concrete sealing curing agent; 2. Epoxy floor, anti-corrosion floor, anti-static floor, acrylic floor system, super wear-resistant polyurethane series; 3.PVC floor series and sports ground series; 4, color steel tile cold roof insulation waterproof series, color steel tile roof and exterior wall coating renovation; 5, laser leveling integration, no ignition explosion-proof floor; 6. Cement self-leveling series; 7. pressed flower art floor and colorful floor; 8, garage integrated facilities, emery wear-resistant ground, municipal road facilities, etc. ; 9. The project owner is responsible for: greening project, purification project, anti-corrosion project and waterproof project.