Evidence Video X4 cannot be opened. Display: Unable to initialize the application.

General solutions to 54 common problems when using VideoStudio (collected from the Internet, shared with everyone)

Friends often encounter problems when using VideoStudio Asked questions, the following will summarize 54 problems encountered in the use of VideoStudio, and discuss them with everyone: 1 ~& }, Z6 O4 F5 I) |! G

1. Why can't DVDs burned with VideoStudio be played on home DVD players? 1 C0 v U( P1 E1 H" g

It may be due to the following reasons. 1 s$ W& X% t" p0 E" M& }& O, V

a. When burning a disc, set it to the miniDVD format, which is not supported by some DVD players! _) S7 ?* y1 X3 ^# n) }7 w6 h

b. can be written with. Burning DVD discs is not very compatible with certain DVD players. c. Burning too fast will also cause the disc to be incompatible. d. Some players do not support DVD+R and can be replaced with DVD-R. Give it a try. If you do not turn off the anti-virus software when burning, the disc compatibility may become worse.

2. When burning a long program, VideoStudio forms a seamless video. Why? Some playback software pauses at chapters?

Some video playback software does not support the chapter format well. You can try WinDVD or Power DVD. These two software are better. 5 o8 e% k* ]8 k% p" i

) m, u: V+ e s2 R7 ]

3, use compression method to record if the disc capacity is exceeded. , will it affect the quality of the program? 8 H& ^4 i% _4 }; F

The duration can be increased by reducing the bit rate, but this will reduce the program quality. If you have higher quality requirements, you can burn it into two discs. 9 A+ |& b8 }0 v

4. In the burning project, what does "do not convert compatible MPEG files" mean?

Please select this option. When the files you collect are standard MPEG files, there is no need for secondary conversion, saving a lot of time. For example, a clip selected from a DVD disc can be inserted into your own video during editing, and it will not be rendered later.

1 D2 z, `# z& W8 i3 I/ ]

5. The sound and picture are synchronized during editing, but some parts of the sound and picture are out of sync when burning. Phenomenon? . i1 M; {( i, p2 p$ [2 B4 Z

a. Before editing, be sure to close the anti-virus software and stop other software from running. If you have an optimization master, you can optimize the memory. Then edit and compress (render).

b. The burning speed is too high, you can try reducing it to 16 speed or 8 speed. A high-speed recorder is useful when burning data discs, and when burning video discs. Be sure to reduce the speed, otherwise the compatibility will become worse: i; ]% w0 y6 r. k- l# f! ~; W

- t Y- c$ g3 N! i$ u<. /p>

6. How to form a new video file after editing? + z/ S6 H9 W4 N. K) a e

You can choose to save the trimmed video in the material menu. The newly generated video will be displayed in the material library. When making openings and endings (the kind in TV series), the required clips can be generated one by one using this method and then used.

7. How to separate the sound from the video shot with DV? Or re-edit?

In the editing panel, click "Split Audio" to separate the audio. Next you can render the audio and save it as a new audio file. You can use this method to get many good audio files from the audio in the ready-made DVD video files.

8. Which file format has the highest quality when collecting? Which encoding is better after editing? & X- B, V0 _/ x

DV format should be selected when collecting, so as to obtain high-quality video material. For hard disk DV, it is better to copy the original file directly to the computer (although it is a MOD file in MPEG format, it is different from the general software compression, but % W9 {7 t. z9 N

High-quality video completed by hardware compression.) After editing, it is better to select a 6M bit stream when generating DVD files.

, }4 \1 j. F F' d' z- i9 {( [

9, Is the resolution of the burned disc related to the choice of the disc and the burner? + W! F, U* q! S' @$ p

The disc resolution is not necessarily related to the disc and the recorder. It is only related to the material captured and the compression after editing. >

10. Can VideoStudio convert programs on old video tapes (VHS) to VCD or DVD? ) h$ Q& Z6 t8 R' c p1 G

Yes, But first, you must have an analog capture card, input the video signal into the computer through the analog interface, and then use VideoStudio 10 to edit.

11. Why can the date and time be seen on the DV display and TV. The display disappears after inputting the 1394 line into the computer? How can I make it display again? 3 y$ |; @: P* _

In fact, the video stream and character stream (time and date) are separated. The player does not read the character stream. But you can use other software to call it out. This software can easily print the time and date of the camera onto the screen to get the time and date you want. k, s" R6 l& J( ]

You can also use the analog acquisition port to collect.

12. How to use chroma key?

The main purpose of chroma key It is a keying operation for monochromatic (green, blue, etc.) backgrounds. Please first place the video to be keyed on the overlay track, click the "Mask and Chroma Key" button, and check the overlay option. ", use the eyedropper tool to click on the monochrome background in the preview window, and you can cut out the background. This is what the weather forecast program does. With it, you can also make your own MTV. The singer only needs to stand on the blue Sing in front of the background, record the sound and picture, and then combine it with various scenery DVDs in VideoStudio 10 (this function has been available since VideoStudio 9). l- Q

! O% n8 s: p5 ~1 u

13, why is there a prompt that the link cannot be found? # x3 w! B9 V+ G% i/ r

Because the path of the project file is an absolute path (only the initial file path can be remembered), once the material is moved or the file is renamed, the project file cannot be found. Got to the path. For the convenience of editing, it is best to create a new folder and put the videos, pictures, music, commentary and other materials used for editing into this folder for management. ; A/ S' B1 b5 G1 J

14. What should I do if the hard disk space is insufficient when preparing to burn?

You can press F6 on the keyboard to bring up the parameter selection panel and adjust the working folder to a larger hard disk partition. Burning DVD requires more than 10G of hard drive space. ' r# t* S8 z3 I$ i/ w! s7 e( Q

6 {9 _0 y) ]( y( r

15, sometimes when installing Video Conference The 1394 interface driver will appear in the device manager of Windows XP and other drivers cannot be installed. Why?

Windows XP will use the 1394 card as a network card. You can ignore this problem. r8 P0 m. I

16. After installing the software, when I want to open the software, it prompts "The application cannot be initialized. The resolution of the screen is too low to play the video" or there is no response when double-clicking the program. Why is this? 2 y' D5 j$ l1 y/ j

VideoStudio 7 and later versions can only run at resolutions greater than 1024*768. " A' J5 V9 W" b# s* F5 A5. {

2 o$ o7 t) R8 u% D3 _

17. Use "VideoStudio" software to edit and burn to a disc. Is the resolution not as high as that produced with professional software? Ah?

This is related to your pre-settings and the code stream selected during compression. VideoStudio 11 supports high-definition formats such as HD DVD and Blu-ray DVD.

+ {' X9 k5 Y4 _

18, why can’t I open the MP3 music file? 8 A5 @9 F% }; Y

It may be that the bit rate of the file is high and you can use conversion The software resets the bit rate to 128 or lower so that MP3 files can be added to VideoStudio smoothly.

' i7 a0 I/ L+ T; e5 W. Q9 `

$ |/ u7 G m# g# d; Z) W/ B3 V

19, when capturing the DV signal , the prompt "DV code conversion in progress, press ESC to stop" will appear every few minutes, and then the software will automatically clear the DV code buffer, making the capture impossible. What is going on? ) K3 x; \3 U4 Q+ B0 d

This is caused by low computer configuration, such as low hard disk speed, low CPU frequency and too small memory. Also turn off anti-virus software and firewalls and stop all programs running in the background.

7 u0 p1 R G/ D0 r; d6 @# O! A5 ?

20. Why use VideoStudio’s DV to DVD wizard mode when AV is connected to the camera? Can't scan the camera?

This mode can only be used when the camera is connected via DV (1394).

* v8 H( }" }5 C$ b* r. ]

21. Why does the red selected when creating a title in the editor have a color cast?

Press F6, select "Edit" in the pop-up "Preferences" window, and cancel the "Apply Color Filter" option.

22. How to set up burning when editing pictures using VideoStudio. Does the resulting disc have a higher resolution?

Use image processing software to change the size of the picture before inserting it into VideoStudio. If you are making a DVD, change the picture to 720*576. If you want to convert it into VCD, modify the image to 352*288, and set the "Image Resampling Option" to "Adjust to Project Size" in the "Preferences" of VideoStudio 10. /p>

23. Why is it that the working folder path has been changed in "Parameter Selection", but it still prompts that the C drive is occupied when burning a disc?

Yes, the disc is burned after setting the parameters. It is still necessary to reset the path of the working folder to a partition other than the C drive. "g; T- c" k5 o+ C `/?$ d

24. How to set up the system? /p>

Configure the system settings before editing. First enable the DMA settings of the IDE disk. You can find it in the properties of the device manager to avoid frame loss during capture. Settings: Transfer mode is DMA. Disable write caching for hard drives used for video capture. 7 q3 C. S8 a1 B4 U4 j; Q

% c2 c# F& V. : w, |* u

25, Are project settings important? 3 b2 R, H9 m, q" N7 I

Yes, it is important. Before editing Improper project settings, including general and compression settings, will cause video editing errors, reduced quality, extended rendering time, disc burning errors, etc. Therefore, you should set up the project before each edit. Movies must be set up in advance. Other editing software must also be set up before use.

2 M5 n& F8 A# s9 e6 z$ h