Ask for technical disclosure of curtain wall construction safety?

1, the operator must pass the entrance examination before taking up his post; 2. Operators must wear qualified safety helmet when entering the construction site, fasten the lower forehead belt and lock the belt buckle; No bare back and slippers; 3. It is forbidden for workers to work after drinking, smoke, and chase and fight at the construction site; 4. When climbing (more than 2 meters), you must wear a qualified safety belt, fasten it, hang it high and use it low, wear non-slip shoes, and put the tools at hand in the tool bag; 5. The electric tools and electrical equipment used in the construction shall conform to the current national standard "Technical Specification for Temporary Electricity Safety in Construction Site" JGJ46-2005; 6. Check the reliability of scaffolding, operating platform and lifting equipment before each shift, and solve problems in time when found; 7. During welding operation, the management system of on-site fire shall be strictly implemented. When welding at high places on site, a brazier should be set below and equipped with fire-fighting equipment, and designated personnel should stand by to prevent fire. 8. When working high above the ground, it is forbidden to throw tools, materials and wastes up and down; There shall be no crossover operation; In rain, snow and windy weather above 9.4, curtain wall installation and material hoisting are strictly prohibited; 10. Operators who construct fire-proof and heat-insulating materials should wear masks and protective work clothes; 165438+ 12. All materials and tools shall not be piled too high. Signature of the disclosure person-signature of the team leader-signature of the operator-.