How to make manual honeycomb briquette mold?

First of all, find a flat land and pile the collected broken coal ash into small piles, like hills. Dig a big hole in the middle. Prepare to pour water into it.

2. Cover with coal ash. Pour the right amount of water in the middle, not too much. Then cover the coal ash with a shovel. Wait for about twenty minutes for water to fully penetrate into the coal ash.

3. And coal ash.

Stir the soaked coal ash with a shovel. When stirring, smash the large coal ash with a shovel. If the coal ash is too dry, you can add some water to continue stirring, and be careful that the coal ash is not too wet. Stir and mix. Grasp the mixed coal ash by hand until it feels loose. Then hold it with both hands until it can be shaped.

4. Crush honeycomb coal.

Take a bucket and fill it with proper amount of water, which can overflow the honeycomb coal machine. Take out the honeycomb briquette machine and dip it in the bucket. Press the honeycomb coal machine on the coal ash pile and take it out after compaction. Find a clean place to press out the honeycomb coal. This kind of honeycomb coal is made. Then immerse the machine in water and continue making.

5. Step 5, place honeycomb briquette.

Arrange the prepared honeycomb briquettes neatly, and pay attention to a certain distance between them when placing them.

If the first floor can't be opened, you can put two floors, but the honeycomb coal on the second floor should be placed between two honeycomb coals on the first floor to facilitate ventilation.

6. Step 6, dry the honeycomb briquette.

Put it where the solar energy shines. If the weather is fine, it will be dry in one day. If it is cloudy, it will take another two or three days.

So the dried honeycomb briquette can be used.