Matters needing attention in using js waterproof coating

With people's yearning for life, there are many kinds of waterproof coatings, many of which are basically the same. Js waterproof coating is the best one we bought in the market. It has good waterproof function, does not pollute the environment and is harmless to people's health. Want to choose JS waterproof coating, what are the precautions of JS waterproof coating? Next, this small series takes you to know about js waterproof coating.

A, js waterproof coating matters needing attention

1, js waterproof coating and cement can be used as JS composite coating liquid according to the ratio of JS waterproof latex _ cement = 1_0.5~ 1. If it feels sticky during construction, it can be diluted with appropriate amount of water. Try to use mechanical mixing, if manual mixing is not sufficient, it is easy to produce construction defects such as dough and bubbles.

2. When preparing polymer waterproof mortar, add 2~3 times of water to dilute and stir evenly. During construction, it must be fully mixed with solid materials such as cement to ensure uniform dispersion.

3, when the weather is bad, the temperature is lower than 5℃ can't construction.

4. It is not allowed to construct in a damp and unventilated environment, otherwise it will affect the film formation.

5. After the construction, wash tools and instruments with clear water as soon as possible.

2. What are the types of js waterproof coatings?

1. Polyurethane waterproof coating is made of polyurethane and coal tar as raw materials. The tar gas it volatilizes is very toxic and difficult to remove, so it was banned in China in 2000.

2. The polyurethane waterproof coating sold uses asphalt instead of coal tar as raw material. However, when using this coating, it is usually diluted with organic solvents such as toluene and xylene, so it also contains toxicity.

3. Polymer cement-based waterproof coating, which is composed of emulsion synthesized by various water-based polymers and high-quality cement mixed with various additives. The flexibility of polymer (resin) is integrated with the rigidity of cement, which has excellent impermeability and stability.

Third, the main characteristics of js waterproof coating

1, wet surface construction; The coating is tough and has high strength.

2. Adding pigments can make colorful decorative layers.

3, non-toxic, tasteless, can be used for waterproof of edible pools.

4. It is suitable for waterproofing of exterior walls and sloping roofs with decorative materials, as well as the construction of facades, sloping surfaces and top surfaces, and can be firmly bonded with various external materials such as base surfaces and decorative bricks, roofing tiles and cement mortar.

5. At high temperature (140℃), it is especially suitable for waterproofing of roads and bridges.

6. By adjusting the mixture ratio, ceramic tile bonding materials and sealing materials can be made.

The above are the precautions, types and main features of js waterproof coating introduced by Bian Xiao. Js waterproof coating is flat, firm, clean, waterless, leak-free, uneven and crack-free. Good waterproof coating is nontoxic and tasteless, especially if you want to know more information about home improvement, please continue to pay attention to us.