How to assemble the bedroom hanger?

Many renters are worried that the rented room wardrobe is not big enough, or there is no balcony, so they will buy an indoor assembly wardrobe to dry or store clothes. Assembled wardrobe is easy to install and use, and you don't have to worry about wind and rain at ordinary times, but the drying efficiency is low and it is not suitable for rainy weather. It is not difficult to assemble the indoor clothes rack. According to the instructions, the horizontal bar and the vertical bar can be fixed with screws respectively. There will be detailed operation methods in the general instructions. Let's learn how to assemble clothes hangers. 1. How about assembling clothes hangers indoors?

Many friends think that there are clothes racks installed in the balcony area, but there are also clothes racks indoors. Indoor clothes hangers are generally used to store clothes or put them in sunny places indoors to dry clothes. They are generally suitable for tenants and rooms without balconies, and can help dry clothes.

The advantage of indoor clothes hangers is that you don't have to worry about clothes being blown away by the wind outside or getting wet by sudden heavy rain; However, its shortcomings are also very obvious. The efficiency of drying clothes is obviously not as good as that of balcony hangers. If it rains, it will make the room very humid and affect normal life. However, if you have a balcony at home, you might as well buy an indoor assembly hanger and put it at home as a coat rack.

Second, how to assemble the bedroom hanger?

Generally, you buy an assembled hanger. The instructions attached to the product will explain the specific installation method and operation steps. You can follow the instructions when installing. The specific steps of assembling the clothes rack are as follows:

1, unpacking

Open the package, check the instructions and see if the parts and installation tools of the product are complete. If it is not complete, contact the merchant in time to reissue it; If the installation is complete, you can start the installation.

2. Install the foot pad of the base.

The foot pad of the base is to prevent the noise caused by the friction between metal and the ground. Press the four foot pads on the base and press them all tightly. Some assembled hangers have universal wheels at the bottom, which can be installed on the base according to the instructions.

3. Install the base guide rail

Generally, the base has two long rails. Align the crossbar with the screw holes to prevent them, and then tighten the screws by hand or with a hexagon wrench.

4, install the stud

Generally, a single-rod hanger has two vertical rods, and a double-rod hanger has four vertical rods. Align the vertical rod with the screw hole and screw the screw up or down with a hexagon wrench. Be careful not to tighten it too tightly, so as to avoid inconvenience in disassembly in the future.

5. Install the U-shaped crossbar.

Generally, single-pole clothes hangers are equipped with U-shaped cross bars, which can be directly inserted on vertical rods without screws. For a double-rod clothes hanger, it is necessary to fix two cross rods with screws on the vertical rod. The specific operation method is similar to the installation of the foundation rail in the third step.

After the installation is completed, a simple indoor clothes rack is assembled. After all is installed, put it on the ground, shake it a few times to see if it is stable, and then tighten the screws properly. Don't tighten the screw too tightly, otherwise it will be difficult to remove it during the movement.