Tips for winter maintenance of floor heating make floor heating daily.

Winter comes to us with a howling cold wind, and the weather is getting colder and colder. At this time, we will sigh that it is good to have floor heating at home. But sometimes there will always be some minor problems in floor heating, so don't worry about it in winter. In fact, it is improper maintenance in our daily life. In order to make the floor heating durable, we should carry out necessary maintenance. In daily life, what are the common problems of floor heating and how to solve them? Today, Bian Xiao will introduce some common sense about floor heating maintenance!

Paty 1: improper maintenance of floor heating? Frequently asked questions are answered one by one.

Improper installation, use and maintenance of floor heating will lead to a series of problems such as water leakage, valve falling off, switch problems, etc. These problems are all caused by improper maintenance and cleaning. Here are the solutions to the common problems of floor heating.

Problem 1: longitudinal cracking and water leakage of the pipeline.

If the pipe cracks and causes water leakage, you should find the leaking place at the first time, handle it well, and don't dismantle it yourself. In addition, to find a way to dry the grass-roots ground, you can use a high-power vacuum cleaner to suck up the water, and then use a fan to force ventilation to dry the leaking place. If the floor is submerged by soaking water, it should be completely removed as soon as possible, so that the back of the floor is up and dry in the shade, and then re-paved after the floor and floor are completely dry.

Problem 2: The screw at the joint between the angle valve and geothermal is loose.

At the joint of the upper and lower rods of the water separator, the joint between the angle valve and the main rod, the handle of the angle valve, and the top and root of the exhaust valve, the phenomenon of screw loosening often occurs. You should hire professionals to solve these family problems.

Question 3: The switch is not flexible.

The floor heating is frequently switched on and off, and the switch is not flexible. Some consumers will turn on the temperature control when necessary and turn it off when going out, thinking that this will save electricity. In fact, this not only saves energy, but also consumes more energy and the switch of floor heating. The floor heating system is a low-temperature operation system, so the floor heating system has good heat storage and does not need to be switched on and off frequently.

In addition, frequent switching can not only achieve the energy-saving effect of floor heating system, but also increase the operating cost of heating system, making the switch inflexible. If the switch is not flexible, don't solve it yourself. Find a professional to check and repair.

Question 4: There is gas accumulation in the floor heating pipeline.

The stagnant water circulation caused by the cohesion of the floor heating pipe affects the heating effect. The floor heating exhaust valve can be adjusted and set, and the manual exhaust valve is installed at the tail of each group of radiators, and the action should be small to prevent it from being broken. Turn the exhaust valve slowly until the water comes out.

Part II: Do you need to maintain the floor heating at home? There are ingenious ways to clean and maintain

Floor heating has incomparable advantages such as comfort and health, safety and reliability, cleanliness and environmental protection, energy saving and economy, and space saving, but if it is not properly cleaned and maintained, it will become a breeding ground for bacteria.

Concern 1: tips for cleaning floor heating

Clean the filter once before use.

The floor heating system must be cleaned once a year before use. The specific methods are as follows: firstly, close the inlet and outlet valves adjacent to the conduit, open the filter after the installation of floor heating, take out the filter and clean it, and check whether the filter is damaged or blocked. If it is broken, replace the filter of the same specification and disassemble it as it is (note: don't let sundries enter the pipeline during the process of disassembling the filter).

The floor heating pipeline is cleaned every 2-3 years.

(The above answers were posted on 2016-11-29. Please refer to the actual purchase policy. )

For more real estate information, policy interpretation and expert interpretation, click to view.