It will be stuffy for a few days after spraying latex paint in summer.

Generally, it takes 3 to 7 days, depending on the construction weather and the quality of latex paint. Because the construction weather is different, it will affect the demoulding and drying of latex paint. For example, if latex paint is sprayed in summer, the weather is hot in the season, so the boring time can be shortened appropriately, about 3 days, but if it is winter construction, it will basically take about 7 days.

Is it normal for latex paint to crack in summer?

1. It is normal if it is only slightly cracked. Because in ventilation, ventilated windows or doors are generally facing the wall, and at this time the latex paint wall has not been completely dried, so subtle cracks will naturally appear after ventilation. In order to prevent this phenomenon, it is suggested that you take some preventive measures to avoid the wind blowing directly on the wall.

2. If it is a small crack, you can directly cut the crack with a knife and then polish it with coarse sandpaper. After polishing, you can paste the caulking with white glue, then level it with putty and brush the latex paint again.

3. If it is partially cracked, you can remove the cracked part first, then brush the anti-crack putty again, confirm the flatness after polishing, and then brush the latex paint again.

What should I pay attention to when brushing latex paint?

1, when painting latex paint, in order to make the floor cleaner and tidy, you can spread something on the floor, such as unused cloth and old newspapers. In this way, when you brush latex paint, you won't fall to the ground and dirty the ground.

2. If some walls don't need to be painted with latex paint, you can stick a barrier on them, which can effectively prevent the walls from being dirty and keep them clean.

3, in the process of painting, for the unused latex paint, but the jar has been opened and needs to be sealed and preserved. Of course, in order to avoid the phenomenon that the surface falls into the tank after crusting, the inversion method can be adopted.

4. In the process of painting latex paint, if you need to use it the next day or the third day, you don't need to clean the roller, just wrap it with plastic film.