What should I do if the composite floor is wet in rainy season?

The composite floor is prone to arching and warping after being damp, which is very unsightly. Therefore, certain moisture-proof measures have been taken for the composite floor during decoration. During floor construction, moisture-proof and insect-proof treatment should be carried out first, insect-proof powder should be sprinkled first, and then moisture-proof paper (film) should be laid. Moisture-proof paper (film) should overlap more than 20cm, and should be spread above the foot of the wall 10cm. After laying the composite floor, the protective measures to be taken in case of wet weather in rainy season are as follows:

Method 1: Waxing regularly.

Waxing can not only make up for the scars left by daily use on the wooden floor, but also improve the brightness of the floor. At the same time, the wax itself has the function of waterproof and moistureproof. The frequency of waxing varies with the new and old floors: the new wooden floor is waxed once every half a month or once a month, and it can be waxed once every six months after three or four consecutive waxings.

In addition to waxing, you can also regularly maintain the floor with essential oil to enhance the stability of the floor and avoid moisture absorption.

Method 2: Pay attention to water consumption when cleaning the floor.

Cleaning is an essential item in the daily maintenance of floors. In rainy weather and high humidity, it is not advisable to mop the floor with water or wet mop to avoid the floor being too wet. Generally speaking, stains can be treated with a soft dry rag. When encountering stains that must be cleaned with water, it is recommended to use a rag that is soaked and wrung dry until it does not drip.

After wiping the floor, it is best to open the doors and windows immediately, let the air circulate and blow dry the floor. In wet weather, you can wipe it again with a dry cloth and then dehumidify it with air conditioning.

Method 3: Use moisture-proof film and activated carbon to prevent moisture.

The special moisture-proof film for wooden floor sold in the market can be spread on the surface of wooden floor to isolate the surface of wooden floor and prevent the surface of wooden floor from being damp. Moisture-proof film should have a certain thickness, which is generally about 5 ~10 mm. When laying moisture-proof film, the position of the foot of the wall should be considered, which can effectively prevent moisture from infiltrating into the wooden floor from underground.

Activated carbon has double functions of moisture absorption and moisture retention (two-way humidity regulation), and long-term use can make the floor not dry and moldy; This effect is more obvious in rainy season.