How to clean amber? How to clean amber when it gets dirty?

1. Amber beeswax, especially carved pieces, will be stained with dust after wearing for a period of time. This is because it will generate static electricity, so it is easier to absorb dust. Here, just soak it in clean water for a while, clean the gap with a soft brush, and then dry it with a soft cotton cloth.

2. When amber is stained with oil due to personal wear or other reasons, you can use some neutral cleaners, brush it with a soft brush dipped in clean water, then rinse it off and dry it. Detergent can be used for daily use.

3. Amber beeswax is insoluble in water, and it is not afraid of general detergents. You don't need to take it off when washing your hands and taking a bath, so the shower gel will not damage amber.

4. If amber gets sticky by accident, it needs to be cleaned with alcohol. Amber beeswax is not afraid to contact alcohol for a short time, but don't contact it for a long time. After removing the glue, it should be cleaned with water immediately.

5. Normal warm water, below 4 degrees, is harmless to amber beeswax, so it is not necessary to use cold water when cleaning amber beeswax, but water can be used, but attention should be paid to the temperature difference. If the weather is very cold (amber is in a cold nature) and it is put into hot water at once, amber may crack due to heat expansion and cold contraction, and it is also necessary to put it into cold water at once from hot water.

6. Amber beeswax is a fossil of ancient resin gum, and its hardness is only 2-3. The most taboo of amber beeswax is scraping and scratching by sharp hard objects, and amber beeswax is also afraid of high temperature baking. However, amber beeswax is actually not as fragile as expected, and normal wearing will generally not cause damage to amber beeswax.