Does it matter if it rains outside and the room is tiled?

Does it matter if it rains outside and the room is tiled?

Does it matter if it rains outside and the room is tiled? It's troublesome when it rains. Now many friends will choose to stick tiles indoors when decorating their houses, which will look more fashionable. Of course, many friends think that if the whole house is made of tiles, it will look good, but it will be very troublesome when it rains. Let's take a look at the influence and related information of tiling outside the room.

Does it matter if it rains outside? 1 The construction weather does affect the construction, but it has little effect on indoor tiling, but it has great effect on outdoor tiling. First, it is dangerous to stick external wall tiles in rainy days, mainly because of the safety of construction workers; Secondly, under the scouring action of rain, it is easy to wash away the cement that sticks to the tiles, making the tiles non-stick and affecting the paving effect of the tiles.

For ceramic tiles, it is easy to cause excessive water absorption in rainy days, and it is easy to crack or even fall off in the later stage. If the quality of tiles is not good, more problems may occur.

Key points of tile laying:

1, cement mortar brick, wall brick should be soaked in water, floor tile is not needed. Wall tiles should be soaked in water for 2~4 hours, subject to no foaming. The purpose is to make the water-absorbing ceramic tile unable to absorb the water in the cement layer quickly, thus making the cement lose its corresponding performance.

2. Before laying the floor tiles, the thickness of the bonded mortar shall be determined according to the design requirements, and the total thickness and surface flatness of the stone and floor tiles shall be controlled by the crosshairs. When sticking floor tiles, you should also do slurry sweeping treatment in advance to keep the ground clean and free of sundries. It is best to use a professional napping roller to nap the wall tiles.

3. Pay attention to the ratio of cement to sand: too much cement will shrink too fast, and too little cement will stick easily. Under normal circumstances, wet plastering is generally used for wall tiles, and the amount of cement is more; Floor tiles are generally dry-bonded, which requires more sand.

If the wall is new, it's best to hang the net first, and then plaster it. If you need to hang heavy objects such as water heaters, it is best to use lightweight bricks of more than 8 cm.

4. After paving at1hour, the cement, caulking agent or other sticky objects left on the brick surface should be wiped clean immediately, because it is difficult to clean them after being stuck like caulking agent for four hours.

5, the shop is stuck 12 hours later, remember to knock on the brick surface for inspection, if found empty drum should be laid again immediately. The overall empty drum phenomenon of floor tiles should be controlled within 3%, and the empty drum on the main channel must be reworked. 3% refers to a single corner empty drum, the whole block shall not be empty drum.

6, brick paving completed 24 hours before walking, thoroughly scrub, mixed with clean water detergent, thoroughly clean the tiles.

7. Pay attention to the joints of ceramic tiles: antique tiles are generally 2~3mm large, wall tiles 1~ 1, 5 mm, floor tiles 1 ~ 2 mm ... The thickness and height of tiles are generally about 3cm.

Does it rain outside affect the room tiling? Rainy days are generally not suitable for tiling, especially when it rains heavily outside, it is easy to wash off the cement of tiles, so the tiles are not sticky, which affects the tiling effect of tiles. If you want to stick tiles, it is best to avoid rainy days, so that tiles and cement are not easily washed away. For ceramic tiles, rainy days often lead to excessive water absorption of ceramic tiles, which easily leads to cracking or even falling off of ceramic tiles. If the tiles you buy are of poor quality, there may be more problems.

Laying tiles in rainy days will not only affect the effect, but also affect workers' construction. It is very troublesome to stick tiles outdoors in rainy days. If the decoration does not take corresponding protective measures in rainy days, it will have a certain impact on the decoration quality. But as long as the moistureproof work is done well, it can still be constructed normally. However, for several projects, it is best to avoid rainy days.

Buy materials. The air humidity is high in rainy days. Some moisture-absorbing materials, such as wood, board and gypsum board, are easily affected by moisture if they are not handled properly during transportation or storage. Wood affected by humidity will have mildew spots. After wood keel and wood products are made into plates, with the gradual drying of air, the water in the materials is easy to crack and deform after volatilization, which will also affect other materials.

On cloudy days, when the air humidity is not very high, wooden floors can be laid, but it is very important to check the water content of the floor. Generally speaking, laminate flooring and solid wood composite flooring can meet the requirements, while solid wood flooring and bamboo flooring must be tested. Otherwise, indoor drying and heating in winter will lead to excessive floor clearance. After passing the inspection, the floor must be put into the original packaging and wrapped with plastic sheets, otherwise the floor will absorb the moisture in the indoor air and be deformed.

Does it matter if it rains outside and the room is tiled? It is not suitable to stick tiles indoors when it rains, because too much water will affect the quality. In southern cities, the air humidity is high, the tiles are too good, and the water can't penetrate. Try to spread them on sunny days. After the renovation, the ground will regain its moisture, and it will take more than 40 days for ventilation in sunny days.

The biggest problem in rainy season decoration is the high moisture content of the large core board itself. In the wet rainy season, it will absorb more water, and once in the dry season, it will cause serious cracking and deformation, which is also the biggest hidden danger of rainy season decoration.

For tiles, rainy days can easily lead to excessive water absorption of tiles, leading to cracking or even falling off of tiles. If you don't buy better brand tiles, the problem will be more serious.

Rainy days are generally not suitable for bricklaying.

Especially in heavy rain, there is a lot of rain outside, so it is easy to wash off the cement with tiles, so the tiles are not sticky. If you want to stick tiles, it is best to avoid rainy days, so that tiles and cement are not easily washed away. Resulting in tile cracking or even falling off easily. If the quality of the tiles you buy is not good.

Extended data:

Specification for floor tile construction procedure:

1, the variety and quality of the plate used in the surface layer must meet the design requirements;

2, the floor tile shop is stuck without signs of looseness, solid and stable. The combination (adhesion) between the surface layer and the next layer should be firm. The phenomenon of floor tile hollowing is controlled within 3%, and the hollowing on the main channel must be reworked. 3% refers to the hollowing in a single corner, and the whole block shall not be hollowed.

3. The brick surface is clean, the pattern is clear, the color is consistent, the joint is flat, the depth is consistent, the periphery is straight, and the plate has no defects such as cracks, corners and missing edges. The patterns of floor tiles were not damaged during construction, such as scratches and abrasions.

4. Floor tile materials shall comply with relevant national laws and regulations, and shall not violate the renovation contract signed by both parties.

5. There is no obvious difference in the color of floor tiles. The gap between each tile should be narrow, and the joints should be handled well. The material and size of the adjacent surface of the surface layer shall meet the design requirements, and the edges and corners shall be neat.

6. The brick surface of the floor tile should be smooth, without cracks and missing corners. And they are very honest with each other. The flatness of floor tiles shall be checked with 2m level, and the error shall not exceed 0.5mm, the height difference between adjacent bricks shall not exceed 0.5mm, and the gap flatness shall be 3mm. When laying floor tiles, other types of work shall not be polluted. 24 hours after the completion of the floor tiles, clean the joints and maintain them.