How to grow Milanese flowers at home?

1. How to grow Milanese flowers

How to grow Milanese flowers How to grow Milanese flowers

Milanese flowers like warmth and sunshine. The flowerpots should be placed in well-ventilated, In a sunny place, there should be 8 hours of light per day during the flowering season. Milan can bloom multiple times a year, and every time it finishes blooming, nitrogen, phosphorus, and potassium fertilizers must be applied. Milan likes a relatively humid environment. When the temperature is high, it should be watered once in the morning and evening. It is best to water early and spray at night. The water quality should be acidic. You can add some potassium dihydrogen phosphate to the water. Even if the water is acidic, it will accelerate the flowering of Milan. Fragrant effect, large fat and water, more sunlight, is conducive to flowering and floral fragrance. If placed indoors for a long time, the lack of sunlight and poor ventilation will not only lead to a large number of fallen leaves, but also the occurrence of diseases and insect pests.

Milan belongs to the Phoebe family, and is a small evergreen tree that adapts to warm and humid climate conditions. Adult plants need sufficient sunlight. It has dense branches and leaves, green and bright leaves, and blooms multiple times a year, with peak blooms in summer and autumn.

1 Cultivation soil

Milan prefers sandy loam rich in humus, fertile and slightly acidic. When preparing potting soil, use 2 parts of peat soil and 1 part of sand, or use 2 parts of fertile garden soil and compost soil and add 1 part of sand, and mix it. Put an appropriate amount of decomposed cake fertilizer on the bottom of the pot as base fertilizer. In order to improve the growth condition of this pot of Milan, the soil must be changed again, but the soil cannot be changed at this season, and the soil should be changed until the next spring. Now we can only continue to maintain it according to Milan's normal maintenance methods.

2 Watering

When potting Milanese plants, ensure good drainage. Watering depends on the dryness and humidity of the climate. It is necessary to keep the pot soil moist but not to have too much water for a long time. If it is too dry, it will be detrimental to the growth of Milan, causing leaf wilting. Maintaining high air humidity is beneficial to the growth of Milan. During drought and vigorous growth periods, it is best to spray water on the leaves 1 to 2 times a day.

3 Fertilization

Milan has lush branches and leaves, and new branches are constantly sprouting during the growth period to form flower spikes, so sufficient fertilizer is needed. Insufficient fertility will not only significantly reduce the number of flowers, but also shorten the flowering period, and the color and fragrance of the flowers will also be significantly lighter. For this reason, top dressing should be done in time. For top dressing, it is better to use decomposed cake fertilizer or sesame paste residue water, but Milan cannot tolerate thick fertilizer, so the principle of applying thin fertilizer frequently should be followed when applying fertilizer. Especially when starting top dressing in spring, avoid applying thick fertilizer. Top dressing should be applied once every 7 to 10 days, and an appropriate amount of superphosphate should be added to the fertilizer water to help improve the quality of flowers.

4 Maintenance

When the summer is hot, Milan should be placed in a shaded place, or placed on the edge of the shade shed, so that it will not be exposed to strong light and can get more protection. Lots of sunshine. Because too much direct light can inhibit the growth and development of Milan, and too much shade can easily cause Milan to grow elongated, weaken its growth, and reduce the number of flowers.

How to raise Milan?

It likes a warm, humid and sunny environment. It is not cold-tolerant and slightly shade-tolerant. Loose, fertile and slightly acidic soil is best. The temperature in winter should not be lower than 10℃.

Milan people like to be warm, sunny and fat. The suitable growth temperature is 20℃~25℃. Under normal circumstances, with sufficient sunshine and high temperature (about 30°C), the flowers that bloom will have a strong fragrance. If it is placed in a shaded place in summer and a large amount of nitrogen fertilizer is applied at the same time, it is one of the main reasons why Milan does not bloom or blooms less and has a weak fragrance. Therefore, during the growth and development period, Milan needs to be maintained outdoors in a sunny place, and attention should be paid to applying more liquid fertilizers containing more phosphorus. It is best to use minced bones, fish bones, chicken bones and other soaked and decomposed fertilizers. Alum fertilizer and water, often supplemented with some chemical fertilizers containing more phosphorus or fermented rice water, etc., can help to produce buds, and they will bloom more, golden in color, and smell fragrant.

Milan likes moisture and should be watered appropriately during the growth period. If you water too much, it will easily lead to root rot and the leaves will turn yellow and fall off; if you water too much during the flowering period, it will easily cause flowers and buds to drop; if you water too little, it will cause the edges of the leaves to dry up and the buds to wither. Therefore, when the temperature is high in summer, in addition to watering 1 to 2 times a day, you must often spray the branches and leaves with clean water and sprinkle water on the ground where they are placed to increase the air humidity. At the same time, fertilization must also be appropriate. Since Milan blooms more often in a year, after each flower blooms, it should be topdressed with 2 to 3 times of fully decomposed thin liquid fertilizer in time, so that it can bloom continuously and have a strong fragrance. Milan likes acidic soil, so potted plants should use culture soil based on leaf mold soil. During the vigorous growth period, spray 0.2% ferrous sulfate solution once a week to ensure green leaves and abundant flowers.

How to grow Milan

Cultivation environment: Potted Milan seedlings should be shaded and avoid strong light exposure. After the seedlings grow new leaves, fertilize once every 2 weeks, but water them The amount must be controlled and should not be too wet. In addition to shade at noon in midsummer, it should be exposed to more sunlight, so that Milan not only blooms more often, but also has a rich fragrance. Areas north of the Yangtze River must be moved indoors for maintenance in winter.

Milan likes moisture and should be watered appropriately during the growth period. If you water too much, it will easily lead to root rot and the leaves will turn yellow and fall off; if you water too much during the flowering period, it will easily cause flowers and buds to drop; if you water too little, it will cause the edges of the leaves to dry up and the buds to wither. Therefore, when the temperature is high in summer, in addition to watering 1 to 2 times a day, you must often spray the branches and leaves with clean water and sprinkle water on the ground where they are placed to increase the air humidity. At the same time, fertilization must also be appropriate.

Since Milan blooms frequently within a year, after each flower blooms, it should be topdressed with 2 to 3 times of fully decomposed thin liquid fertilizer in time, so that it can bloom continuously and have a strong fragrance. Milan likes acidic soil, so potted plants should use culture soil based on leaf mold soil. During the vigorous growth period, spray 0.2% ferrous sulfate solution once a week to ensure green leaves and abundant flowers.

Use loose, well-drained and aerated soil for potting. Repot once every 1 to 2 years, and fertilize once every 1 to 2 weeks during the growth period.

Most of them are planted in gardens in the south; potted plants in the north should be cultivated outdoors in places with direct sunlight in spring, summer and autumn. In winter, move it indoors to a place with direct sunlight, and the overwintering temperature should be above 10°C.

After the adult mother plant blooms, it will produce small oval-shaped red fruits that look like the fruits of the Kudong tree. Pick the fruits when they are reddish brown, soak them in warm water and peel off the fleshy peel. Then sow the seeds in sandy soil pots as they are picked. They will germinate in about one month after sowing in summer and autumn. It takes two or three years for the seedlings to become mature plants before they can bloom. Unlike the seedlings propagated by high-altitude layering, they can be full of fragrant flowers in the same year.

Proper fertilization. Milan flowers have strong flowering properties and bloom frequently, so nutrients must be replenished in time. Every time the Milan flower blooms, you should replenish nutrients as soon as possible. Insufficient fertilizer is the main reason why the Milan flower only grows leaves but does not bloom or loses leaves and buds. Therefore, when the temperature rises, Milan flowers should be moved outdoors for maintenance. After a week, the soil should be loosened and some thin nitrogen fertilizer should be applied. Use 10% to 20% of decomposed cake fertilizer, water or human excrement, and apply it every 10 days or so. Liquid fertilizer once to promote the growth of branches and leaves. Starting from June, Milan flowers enter the peak growth and flowering period until mid-October. Every 15 days or so, you need to apply a thicker fertilizer based on phosphate fertilizer, or spray 0.3% potassium dihydrogen phosphate solution every 15 to 20 days to make the flowers bloom more luxuriantly.

Special attention should be paid to the fact that phosphorus fertilizer must be used mainly during the flowering period, otherwise only leaves will grow but no flowers will bloom. During the flowering period from June to October, if there is insufficient fertilization, not only will the number of blooms be reduced and the flowers will not be fragrant, but the flower buds that have appeared will wither and fail to bloom.

How to grow Milanese flowers? How to grow Milanese flowers? Methods and precautions for growing Milanese flowers

After the Milanese flowers are first watered once in the pot, water less for half a month to promote the growth of new roots. .

In summer, when the temperature is high and evaporation is high, the amount of watering should be slightly larger; during the flowering period, the amount of watering should be appropriately reduced to avoid bud drop. After autumn, the weather turns cooler and growth slows down, so the amount of watering should be controlled.

The principle of watering is to water when it is dry and don’t water when it is dry. During the hot summer season, you can spray water on the leaves or around the flowerpot before sunset to increase the ambient humidity.

Although Milan loves sunshine, it needs proper shade at noon in midsummer to prevent the leaves from being burned by the scorching sun. Milan likes fertilizer. During the peak growth period in summer, alum fertilizer water made from broken bones, fish intestines, and hoof slices should be applied frequently.

Appropriate application of more liquid fertilizer containing more phosphorus can make Milan bloom more, with rich floral fragrance and golden color. Potted Milanese plants generally need to be repotted and soiled once every two years. Do not break the soil. Remove some old soil from rootless areas and cut off rotten roots.

When adding new soil, add some phosphate fertilizer as base fertilizer, but not too much. After potting, put it in a cool place for curing, and then move it to a sunny place after about a week.

It is generally more appropriate to replace the soil about a week after moving out of the house in spring. Milan is afraid of the cold and it is difficult to survive the winter.

When the temperature is below 12℃ and enters the dormant period, fertilization should be stopped and watering should be reduced. Before frost comes, it must be moved indoors to a sunny place and the temperature should be kept at about 10-12℃.

To protect the leaves, spray the branches and leaves with warm water appropriately. If the temperature is low, you can also cover them with plastic bags for a period of time, but leave holes above them for ventilation. In the coming spring, you should wait until the temperature stabilizes before leaving the house to avoid freezing the plants to death in the spring.

Before leaving the house, the plants should be allowed to undergo an exercise process to adapt to changes in temperature. For example, move it out to bask in the sun at noon and then move it back at night; when placing potted flowers indoors, gradually open the windows, etc.

The Milan you just bought may not adapt to the environment, because before you buy it, it was grown in a greenhouse. After arriving at your home, the temperature, humidity and light cannot be compared with those in the greenhouse. In addition, Poor control of the humidity of the potting soil and other factors may cause the newly purchased flowers to wilt and fall off their leaves as soon as they are brought home. There is also a possibility that if you are from the north and the Milan you buy is imported from the south, the phenomenon you mentioned will also occur.

Milan likes light, ventilation and moist soil. Compared with other plants, what it needs most is to maintain the acidity of the soil. You can often add ferrous sulfate to the water at a ratio of 1:1000 when watering. (This is important, ferrous sulfate is easy to find and cheap in flower and bird markets). Precautions: It is taboo for Milan to continuously water heavily in a humid environment. After each watering, it must be encouraged to receive sunlight to promote transpiration from the leaves.

I believe that with careful care, Milan will be able to bud again and the flowers will be fragrant.

How to raise Milan?

Milan likes a warm and humid climate, likes light and fertilizer, dislikes drought and waterlogging, avoids cold, and tolerates semi-shade. In the south, it can be cultivated in the open field, but in the Yangtze River Basin and the north, potted plants are often used. In winter, they should be kept warm indoors for overwintering.

Milan’s diseases include stem rot, anthracnose, etc.; insect pests include white cicadas, aphids, red spider mites, scale insects, etc.

Stem rot occurs on Milanese stems.

When the disease first appears, it appears as small black spots, which expand into strips and become dark brown. After one circle around the stem, the plant dies. In the early stage of the disease, 0.5% to 1% Bordeaux mixture can be used to smear the branches; 1 to 2 degrees of Shiliu mixture or 70% Tobride 800 times aqueous solution can also be used to smear the branches, and the effect is also good.

Anthrax is the main disease in Milan, mostly occurring from June to October. In the early stage of the disease, the lesions invade from the leaf tips and leaf edges, turning the leaf tips brown. It can occur on the leaves, petioles, and stems of plants. Prevention and treatment methods: When diseased leaves and branches are discovered, remove them promptly and improve ventilation conditions. It can also be sprayed with 1000-1200 times aqueous solution of potassium permanganate.

Milan’s pests such as spider mites and aphids can be sprayed with 40% dimethoate 1000-1500 times aqueous solution, or 1200 times dichlorvos aqueous solution.

Milan likes moist, fertile, loose loam or sandy loam, preferably slightly acidic. The potting soil can be prepared by mixing 25% compost, 50% leaf mold soil and 25% river sand. Put an appropriate amount of decomposed cake fertilizer on the bottom of the pot as base fertilizer. Milan likes warmth. New branches begin to appear when the temperature is 16°C, and the plants grow vigorously when the temperature is 25°C.

After watering the Milanese plant thoroughly once it is first potted, it is advisable to water less for half a month to encourage the growth of new roots. In summer, when the temperature is high and evaporation is high, the amount of watering should be slightly larger; during the flowering period, the amount of watering should be appropriately reduced to avoid causing bud drop. After autumn, the weather turns cooler and growth slows down, so the amount of watering should be controlled. The principle of watering is to water when it is dry and don’t water when it is dry. During the high temperature season in summer, you can spray water on the leaves or around the flowerpot before sunset to increase the ambient humidity. Although Milan loves sunshine, it needs proper shade at noon in midsummer to prevent the leaves from being burned by the scorching sun. Milan likes fertilizer. During the peak growth period in summer, alum fertilizer water made from minced bones, fish intestines and hoof slices should be applied frequently. Appropriate application of more liquid fertilizer containing more phosphorus can make Milan bloom more, with rich fragrance and golden color.

Potted Milanese plants generally need to be repotted and soiled once every two years. Do not break the soil. Remove some old soil from rootless areas and cut off rotten roots. When adding new soil, add some phosphate fertilizer as base fertilizer, but not too much. After potting, put it in a cool place for curing, and then move it to a sunny place after about a week. It is generally more appropriate to change the soil about a week after moving out of the house in spring.

Milan is afraid of the cold and it is difficult to survive the winter. When the temperature is below 12°C and enters the dormant period, fertilization should be stopped and watering should be reduced. Before frost comes, it must be moved indoors to a sunny place and the temperature should be kept at about 10-12℃. In order to protect the leaves, spray the branches and leaves with warm water appropriately. If the temperature is low, you can also cover them with plastic bags for a period of time, but leave holes above them for ventilation.

In the coming spring, you should wait until the temperature stabilizes before leaving the house to avoid freezing the plants to death in the spring. Before leaving the house, the plants should be allowed to undergo an exercise process to adapt to changes in temperature. For example, move it out to bask in the sun at noon and then move it back at night; when placing potted flowers indoors, gradually open the windows, etc.

How to grow Milanese flowers well?

Milan is a small subtropical evergreen seedling of the Meliaceae family and should grow in loose, fertile, acidic soil. If you want to raise Milanese well, you must try your best to meet the growth habits of Milanese that love warmth, light and fertilizer in all management tasks.

Temperature Milan grows better when the temperature is between 20℃ and 35℃, and can bloom up to five times from June to October. In Milan, the temperature should be basically stable in late April before leaving the house, and the house should be moved indoors to a sunny location before frost. The room temperature in winter should be kept between 10°C and 12°C, but the temperature should not be too high, otherwise the top buds of Milan will sprout and affect the growth and flowering of the next year.

Light Milan should be placed in a sunny place all year round. In this way, not only will the plants grow well and bloom more frequently, but at the same time, as the temperature and light increase, the activity of the enzyme as a catalyst will also increase. , the fragrance of the flowers will be more intense.

Reasonable fertilization: Milan has strong flowering ability, blooms frequently, and has very strict nutrient requirements. Therefore, every time Milan flowers bloom, fertilizer must be replenished in time. In addition to factors such as light and moisture, insufficient fertilizer is the main reason why Milan only grows leaves but does not bloom or loses leaves and buds. Therefore, a thin decomposed liquid fertilizer mainly composed of nitrogen fertilizer should be applied once a week after Milan leaves the house; after entering the growth period and blooming period, organic fertilizer mainly composed of phosphate fertilizer should be applied once a week. For large plants that grow well, the fertilizer can be a little thicker, while for small plants with poor growth, the fertilizer can be a little lighter. Special attention should be paid to the fact that phosphorus fertilizer must be used mainly during the flowering period, otherwise only seedlings will grow but no flowers will bloom.

How to grow Milanese flowers, how to prune Milanese flowers

Milanese flowers are common plants in homes and are loved by many people.

Today, Baobao.com will introduce to you how to cultivate Milanese flowers and how to prune Milanese flowers. How to grow Milanese flowers. Pictures of Milanese flowers. Milanese flowers are a kind of landscape tree. They have small leaves and small flowers, which are usually mostly yellow. They are a large-leaf Milanese variety.

Making a Milan is loved by everyone because when it blooms, the flowers are extremely fragrant and evergreen all year round, so it is also called Four Seasons Milan. Because its flowers are relatively small, it is also called Broken Milan. . Most of them are planted in the male family.

Milanese flowers are native to southern Asia, mostly in the tropics. The corolla usually has five leaves, and it is a round flower. It is a hermaphroditic plant with yellow flowers, a fragrant and rich aroma, and seeds. The flowering period is usually July and July in summer. August. Milan flower is an edible flower, and its flowers can extract the internal spices to make essence.

And as a green plant, Milan can absorb some harmful gases in the home, which is more practical. In fact, Milanese is a warm plant and likes sunny places. As long as the sunshine is good, the flowers will bloom beautifully and have a fragrant fragrance.

Due to the growing environment, it is not suitable for growth in cold periods or areas. It is generally shade-tolerant and prefers sunlight. The temperature is generally around 23°C.

The temperature in winter cannot be less than 10 degrees Celsius. How to grow Milan flowers Pictures of Milan flowers 1. Milan likes a warm climate, so it is generally recommended to grow it in a greenhouse. It can be placed outside in summer, but you must pay attention to shading. Proper shading is still possible.

The general temperature is guaranteed to be around 25 degrees Celsius. Water appropriately to cool down during the hottest period of summer. The temperature must not be lower than 10 degrees Celsius in winter, otherwise you will get frostbite.

2. Milan likes moisture, so it needs timely watering, especially during the growth period. However, remember not to allow waterlogging, because excessive watering will cause a series of problems such as yellowing of leaves and rotten roots. . Therefore, it is generally sufficient to water twice a day, and the leaves need to be properly watered in summer.

3. Milan is not very demanding on fertilizers, but because it blooms many times a year, it causes a lack of nutrients. Therefore, it is necessary to apply a little fertilizer in time after flowering, not too much. . 4. It is best to choose acidic soil as the main corrosive substance is leaf rot. You can also purchase special fertilizers on the market.

When choosing potted Milanese flowers, the soil should be turned over frequently to ensure the passage of air and drainage. Generally, the pots should be changed every two years, and the pot soil should be fertilized every two weeks when the plants grow. Seedlings should not be exposed to the sun.

How to prune Milanese flowers? Pictures of Milanese flowers. The first step in daily pruning of Milanese flowers is usually in the spring when they are preparing to grow and sprout. The main purpose is to remove some branches that withered in winter or were damaged by diseases and insect pests. and dense branches that are too dense, resulting in reduced photosynthesis.

During the growth process, the seedlings can be trimmed and trimmed to achieve uniform growth conditions. Generally, it is enough to keep about 20cm of the trunk, and all the forks above need to be trimmed.

For perennial Milan, the upper branches can be appropriately pruned to ensure the development of lateral buds. After the plant matures, many side buds or terminal buds are different during the growth process, so it is recommended to prune appropriately to ensure neat growth.

However, during the budding period, the branches and leaves can be left intact and used only for shade and sun protection. The above is the introduction I brought to you on how to grow Milanese flowers and how to prune Milanese flowers. I hope it can help everyone.

For more relevant information, please pay attention to the China Security Network.

How to grow Milanese flowers without losing leaves

Milanese flowers are produced in Fujian, Guangdong, Sichuan, Yunnan and Southeast Asia, and are subtropical tree species. Likes a mild and humid climate.

Because Milan is a southern plant, it is difficult to cultivate indoors. Requires careful maintenance. The reasons why your Milanese plants are losing leaves may be caused by many factors, such as soil pH, water pH, and fertilizer problems. Now we would like to inform you about some technical points of Milan farming as follows:

Milan is mostly cultivated in the north with peat, rotten leaves and sandy soil. At home, you can use (old) Clivia soil and plain sand soil mixed with half and half to form a cooperative cultivation soil. The pot should not be too large, and no alkaline fertilizer should be added to the soil. The bottom of the pot should be padded with a drainage layer. After the seedlings are planted, they are first maintained in the shade. When the weather is dry

Spray water on the leaves and surrounding ground every day to keep the environment moist. After new leaves grow, move them to sparse shade. Later, they will gradually adapt to strong light and the flowers will become more fragrant. Flower seedlings potted in spring should be topdressed around the beginning of autumn. It is better to use thin organic liquid fertilizer. Starting from the second year, during the peak growing season, topdress organic liquid fertilizer every 20 days. If it can be applied alternately with a mixed solution of 0.1% urea and 0.2% potassium dihydrogen phosphate, the flowers and leaves will become more lush. The pot soil should be kept moist at all times. Do not miss water or let it dry out, but do not allow water to accumulate for a long time. If ventilation is required when placed indoors, it should be rotated outdoors in about 15 days

Moving indoors in winter requires sufficient sunlight, and the minimum room temperature should not be lower than 8°C. Control water and prohibit fertilizers, and pay attention to opening and closing doors and windows to avoid direct cold wind and smoke pollution. Prevent the harm caused by scale insects and sooty stains. In North China, after the dry wind passes from late April to early May, move it outdoors for maintenance.

Milan can be repotted every two years.

Milan should be pruned and reshaped starting from the seedlings, and a section of the main trunk 15 cm to 20 cm high should be retained. Do not let the main trunk branches protrude from the soil surface. Instead, branch pruning above the main trunk 15 cm high to Make the plant plump. The lower branches of perennial old plants often age and die. Therefore, in the north, it is advisable to cut short once every other year during high-temperature seasons to encourage the adventitious buds at the lower part of the main branches to sprout and grow new side branches, thereby maintaining a well-proportioned tree, a strong tree, and lush leaves and flowers.

How to raise Milan and what are its habits?

Milan likes a warm, humid and sunny environment. It is not cold-tolerant and slightly shade-tolerant. Loose, fertile and slightly acidic soil is the best. , the temperature in winter is not lower than 10℃, and the temperature in the north is not lower than 5℃.

Milan likes moisture and should be watered appropriately during the growth period.

If you water too much, it will easily lead to root rot and the leaves will turn yellow and fall off; if you water too much during the flowering period, it will easily cause flowers and buds to drop; if you water too little, it will cause the edges of the leaves to dry up and the buds to wither.

Therefore, when the temperature is high in summer, in addition to watering 1 to 2 times a day, you must often spray the branches and leaves with clean water and sprinkle water on the ground to increase the air humidity. At the same time, fertilization must also be appropriate.

Since Milan blooms frequently within a year, after each flower blooms, it should be topdressed with 2 to 3 times of fully decomposed thin liquid fertilizer in time, so that it can bloom continuously and have a strong fragrance. Milan likes acidic soil, so potted plants should use culture soil mainly composed of leaf mold soil.

During the vigorous growth period, spray 0.2% ferrous sulfate solution once a week to ensure green leaves and abundant flowers.

How to grow Milanese flowers

Milanese flowers are evergreen shrubs to small trees of the Meliaceae family.

It has many branches, and the leaves are odd-pinnately compound leaves with 3-5 leaflets, obovate and dark green. The panicles are axillary, and the flowers are small and dense, yellow and fragrant.

Flowers all year round. Habits: Likes warmth, moisture, and plenty of sunshine, but is afraid of drought.

Requires fertile, well-drained, neutral soil. Cultivation and management: High-altitude layering is often used for propagation, which can be carried out in all seasons.

The propagated seedlings are first planted in small pots. After the root system is stabilized, they are planted directly on the ground. Water them once a day and twice a day in summer to increase moisture. Fertilize once a month, mainly nitrogen fertilizer.

One year later, transplant into pots and prune to cultivate a hemispherical plant shape. After potting, mainly apply phosphorus and potassium fertilizer once a month. Water until the pot soil is dry to avoid root rot due to excessive watering.

The Milanese that everyone buys at the flower market is grown in greenhouses. Constant temperature and humidity, sufficient light, and professional management are very suitable for the growth of Milan.

After taking it home, place it on the balcony at home. High temperatures and hot winds in summer, large temperature differences between morning and evening, poor ventilation, and improper watering can easily cause Milanese leaves to fall. There are reasons for improper care, and there is also the adaptive process of Milan in the process of sudden changes in the growing environment.

Therefore, most people will lose leaves in large areas within a week after buying Milan from the market, and eventually become "bare legs". The main reasons for falling leaves in Milan: 1. Water.

As a result, the root system cannot breathe, causing suffocation and root rot. Water cannot be conducted to the leaves.

What is manifested is that at first the lower leaves curl, dry up, turn brown and fall off, which in turn causes the upper green leaves to also fall off within a short period of time. 2. Less water.

Long-term water shortage will cause the root system to die. If you water it thoroughly at this time, a large number of leaves will fall in a short period of time. Plants die.

Of course, there are also many reasons such as improper fertilization, poor ventilation, freezing and falling leaves. Disposal method: 1. The newly purchased Milan should be placed indoors in a ventilated place with scattered light.

You can see the morning light every day, and move indoors when the sun is shining at noon. See the sunset when the sun is about to set.

This process can last about half a month, allowing Milan to adapt. During this period, watering should strictly follow the principle of "seeing dryness and seeing wetness". If it is not dry, do not water. If it is watering, water it thoroughly.

2. Gradually extend the sunshine hours in Milan. In addition to the need for shade during the scorching sun at noon, you can also provide more sunshine. Promote chlorophyll formation in leaves.

During this period, watering should strictly follow the principle of "seeing dryness and seeing wetness", basically watering once every 2 days. 3. If a large area of ??leaves falls after watering, you can raise the Milan pot and remove the top soil in the pot. Be careful not to damage the root system.

Stop watering and fertilizing, place it in a ventilated place, and only spray water on the leaves in the morning and evening. Accelerate the evaporation of moisture in the basin, and after the Milanese leaves no longer fall, you can gradually switch to normal management.

It is taboo in Milan to continuously pour heavy water in a humid environment. After each watering, you must encourage it to receive sunlight to promote transpiration on the leaves. I believe that with careful care, Milan will be able to bud again and the flowers will be fragrant.

Milan likes moist, fertile, loose loam or sandy loam, preferably slightly acidic. The potting soil can be prepared by mixing 25% compost, 50% leaf mold soil and 25% river sand.

Put an appropriate amount of decomposed cake fertilizer on the bottom of the pot as base fertilizer. Milan likes warmth. New branches begin to appear when the temperature is 16°C, and the plants grow vigorously when the temperature is 25°C.

After watering the Milanese plant thoroughly once when it is first potted, it is advisable to water less for half a month to encourage the growth of new roots. In summer, when the temperature is high and evaporation is high, the amount of watering should be slightly larger; during the flowering period, the amount of watering should be appropriately reduced to avoid causing bud drop.

After autumn, the weather turns cooler and growth slows down, so the amount of watering should be controlled. The principle of watering is to water when it is dry and don’t water when it is dry.

During the high temperature season in summer, you can spray water on the leaves or around the flowerpot before sunset to increase the ambient humidity. Although Milan loves sunshine, it needs proper shade at noon in midsummer to prevent the leaves from being burned by the scorching sun.

Milan likes fertilizer. During the peak growth period in summer, alum fertilizer water made from broken bones, fish intestines and hoof slices should be applied frequently. Appropriate application of more liquid fertilizer containing more phosphorus can make Milan bloom more, with rich fragrance and golden color.

Potted Milanese plants generally need to be repotted and soiled once every two years. Do not break the soil. Remove some old soil from rootless areas and cut off rotten roots. When adding new soil, add some phosphate fertilizer as base fertilizer, but not too much.

After potting, put it in a cool place for curing, and then move it to a sunny place after about a week. It is generally more appropriate to change the soil about a week after moving out of the house in spring.

Milan is afraid of the cold and it is difficult to survive the winter. When the temperature is below 12℃ and enters the dormant period, fertilization should be stopped and watering should be reduced.

Before frost comes, it must be moved indoors to a sunny place, and the temperature should be kept at about 10-12℃. In order to protect the leaves, spray the branches and leaves with warm water appropriately. If the temperature is low, you can also cover them with plastic bags for a period of time, but leave holes above them for ventilation.

In the coming spring, you should wait until the temperature stabilizes before leaving the house to avoid freezing the plants to death in the spring. Before leaving the house, the plants should be allowed to undergo an exercise process to adapt to changes in temperature.

For example, move out to bask in the sun at noon and then move back in the evening; when placing potted flowers indoors, gradually open the windows, etc. [Pest Control] Under conditions of high temperature and poor ventilation, Milan is susceptible to aphids, red flowers, etc. Spiders, scale insects, and mildew are harmful. It can be treated with 1500 times of dichlorvos or dimethoate.

Use 0.3 degree lime sulfur mixture to eliminate scale insects and red spider mites. When mildew is mild, it can be painted manually, and when severe, spray 1500 times thiophanate.

Another: Milan (Aglaia odorata) ornamental potted woody flowers and evergreen shrubs. Milan is multi-branched, with alternate leaves, pinnately compound leaves with 3-5 leaflets, the leaflets are obovate, and the entire margin is glabrous.

Blooms in summer and autumn, with terminal panicles. The flowers are small and dense, yellow, like rice grains, and have a very fragrant taste, so it is called "Milan". [Cultivation and management] Upper pot: Apply 2-3 pieces of hoof horn slices on the bottom of the pot as base fertilizer.

The potting soil should be sandy loam. After potting, water thoroughly.

Fertilization: After the seedlings survive and grow new roots and leaves, apply dry fertilizer every half a month, with 25 grams of crushed hemp residue per pot. Then loosen the soil and mix the pot soil and fertilizer evenly.

Pour the fertilized water from hoof horn slices once a week. Stop watering fertilizers at the end of September.

Watering: In the Beijing area, Milan leaves the house in mid-May and enters the house in early October. There is no need to shade after leaving the room, but you need to water it well. Roots will rot easily when the amount of water is large.

Excessive watering during the flowering period can also cause bud drop. Insufficient watering will cause the leaves to curl and turn yellow.

The principle of watering is to see dry and wet. Temperature: After entering the room, the room temperature should be around 10-12 degrees, and the minimum should not be lower than 5 degrees.

If the room temperature is too low, it can easily cause freezing damage. Excessive temperature can easily cause excessive growth.

[Disease and Pest Control] Under conditions of high temperature and poor ventilation, Milan is susceptible to aphids, red spider mites, scale insects, and mold and mildew. It can be treated with 1500 times of dichlorvos or dimethoate.

Use 0.3 degrees lime sulfur mixture to eliminate scale insects and red spider mites. Mildew disease occurs mildly.