How to make infrared photos with ps How to make infrared photos with ps

1。 What is dynamic in PS is to use the timeline, and the window-timeline is opened for use.

2.

What you said about doing dynamic infrared is actually a very simple operation step in the timeline.

3.

The answer is limited, so you can communicate alone.

How to change PS?

You can use the magnetic lasso tool to roughly select characters. If the proportion of characters in the surrounding environment is small, you can directly use content recognition to select and fill in.

If the characters in the photo stand out, fine-tune them. A series of tools such as matting, stamping and restoration suggest that if you want to combine the characters with the surrounding pictures, you should make a color match before moving. Or use red layer mask after moving, and do infrared processing. . The steps of making a painting?

The production process of inkjet printing: (1) image processing: AdobePhotoshopCS2 (PS for short) is used to process images, such as cutting scanned images, cutting image size, color adjustment, special effects production, file format and color mode conversion, etc. ⑵ Page design: Use AdobeIllustratorCS2 (AI for short) for graphic design of posters, leaflets or other advertisements (please use other software for multi-page or book design). In this software, you can manually design, input and draw many text contents, corporate logos, vector graphics and illustrations. The adjusted pictures in AdobePhotoshopCS2 can be put into AI in the form of links and combined with other vector graphics to complete the design work. ⑶ Export of works: After the print advertisement design work is completed in AI, the works are exported to file formats supported by other output printing software through "Export". The related color mode, file format and resolution are CMYK color mode and TIFF file format, and the resolution is 72- 12DPI. If there is no special requirement, other options are defaulted. Note: Many friends need to use other software, which is understandable. As long as the output quality can be guaranteed. ⑷ Software print settings: Before printing, use professional print output software such as Montai for output typesetting, and make relevant settings in the software according to actual materials. 5] Photo inkjet output (this paper only aims at the domestic Nova photo printer with the highest market share) 1. Preparations before the real machine is turned on: ① Check whether the data cable of the photo machine is connected to the computer normally and whether there is any loose virtual connection; ② Check whether the four ink cartridges on the left side of the camera have enough ink and whether the ink needles are connected properly; 3 boot; ④ Press the "Enter Ink Cartridge" option to move the carriage together with the four nozzles from the ink station to the left, remove each nozzle, and check whether there is residual ink on the contact belt. If yes, please gently wipe it with toilet paper dipped in alcohol to ensure the cleanliness of the contact zone. Then use an electric ink absorption pump (recommended) or an ink extractor and a needle tube to aim at the nozzle of the removed nozzle for several times, and stop ink absorption until ink flows out of the pump pipeline. Then check whether there is residual ink on the chip on the back of the nozzle and the nozzle at the bottom. If yes, please wipe it gently with toilet paper dipped in alcohol to ensure the cleanliness of the nozzle chip, and prevent the nozzle from being short-circuited with the contact pad after power-on due to ink residue and burning related accessories. After the inspection of the four nozzles is completed in turn, press the "access to ink cartridge" option to reset the carriage and complete the inspection of the nozzles. ⑤ Check whether the stainless steel shaft and the copper sleeves on both sides of the carriage are clean and smooth. If the stainless steel shaft is too dry, please wipe it with sewing machine oil to ensure that the combination of the carriage and the copper sleeve can walk freely on the stainless steel shaft. 2. Loading printing media: ① Choose different printing materials according to customers' needs, such as adhesive-backed PP paper, high-gloss photographic paper, light box sheets, etc. ② First, install the printed data on the reel of the photo machine. After installation, pay attention to clamp the left and right clamps to ensure that the paper does not deviate during output. Then, hold the front end of the paper and feed it into the machine from under the reel at the back of the machine. After the machine automatically detects that there is paper entering, it will automatically start the paper feeding wheel for automatic paper feeding. Be careful not to manually feed paper in the initial stage to complete the loading of printed materials. Generally, after the printing materials are installed in place, it is necessary to press the paper that may be slightly inclined with hard and thin cardboard on the left and right sides of the paper to clear the obstacles for the smooth walking of the nozzle. So as to prevent the nozzle from being scratched due to paper curling. 3. Printing test: If the printer has not been working continuously recently, please carry out printing test, which can be carried out by printing the four-color bar set yourself or using the test method of the machine itself. Its purpose is to check whether each nozzle is blocked or not, and whether there is incorrect nozzle positioning. If the above phenomenon occurs, please eliminate it immediately. 4. Official printout ① Open Montai software and create a new file according to the paper size and output file size; ② Import the design draft into this file; ③ Select an image, check and set the image size; (4) Click the print option to set the settings before printing, such as paper size and material selection; ⑤ Complete all pre-printing settings, click Print and issue printing instructions; ⑥ Select the file to be output in the print management system opened at the same time, and then click Start; ⑦ The formal printing work began. ⑧ If there is no other work, this print management system window should always be kept at the top of all open programs on the desktop, so that the printed output can always occupy the resources of the computer CPU first, thus ensuring sufficient speed and stability to complete the printed output task. Pet-name ruby whether in print output at the same time opened the photo machine air drying system, if the weather is wet, you can open the hot drying system. It is generally not recommended to start the hot air drying system, because the hot air drying system of domestic machines is not as stable as that of imported machines. Attending if printing a long picture, it is suggested that the paper guide should be glued to the front end and then glued to the delivery rod after the paper is loaded, so that the two infrared probes for feeding and delivery of the machine can play a role, and the paper can be automatically detected, fed and delivered automatically, thus achieving the effect of unattended automatic output. 5. Film-covered cold mounting Generally, non-waterproof paper and water-based dye ink are used for spraying advertising photos, and film-covered cold mounting must be adopted to effectively protect their pictures. The method is as follows: (1) Select the cold mounting film equal to the picture and install it on the cold mounting machine; (2) The XX surface of the picture overlaps with the XX surface of the cold-mounted film; (3) Put the overlapped picture and the left and right of the cold mounting film together between the two rollers of the cold mounting machine; ④ One should tighten the left and right wheels according to his own feeling. Not too tight. It can be adjusted according to experience, and it is better to tighten them moderately.

PS-802 1 Combustible Gas Detector Manual?

1. combustible gas alarm detection

The detection principles of combustible gas alarm mainly include catalytic combustion, infrared and thermal conductivity, and also depend on the range, site environment and user demand. Combustible gas alarm detects gas through probe. When the probe detects combustible gas, it first reacts, that is, converts the gas drop signal into an electrical signal and sends it to the controller to send an alarm signal. The difference of this signal is mainly determined according to the percentage concentration value of the lower explosion limit of combustible gas displayed by the instrument. The higher the concentration, the stronger the signal.

2. Working environment and temperature and humidity requirements of combustible gas alarm.

Combustible gas alarms also have certain environmental requirements. Usually, the working environment requires the temperature range to be controlled at (0-40)℃. The relative humidity is 85% RH.

3. Requirements of combustible gas alarm installation on detection area

In order to achieve the expected effect and truly eliminate potential safety hazards, we must consider the area of the monitoring site, and consider the number of alarms installed according to the size of the area, otherwise the alarm will be a decoration and will not have an alarm effect. If the detection area is less than 20 square meters, 1 main engine and 1 gas detector can meet the requirements, but if the detection area exceeds 20 square meters, the number of main engine channels and detectors will increase.