How to press down the bulging wooden floor? What to do if the wooden floor bulges when soaked in water?

If the weather is humid, or the wooden floor is often soaked in water, the moisture cannot dissipate and will penetrate deep into the wooden floor. Over time, it will cause the wooden floor to deform due to moisture and cause arching. So how do you suppress bulging wooden floors? What to do if the wooden floor becomes bulging due to water soaking? Let’s take a look below.

How to suppress bulging wooden floors

1. Ventilation treatment

Ventilation can disperse the moisture in the floor. Otherwise, the floor will be more humid and the floor will bulge. The phenomenon is more serious, so ventilation should be done in time. The bulging solid wood floor will recover naturally. Therefore, when water enters the solid wood floor, the doors and windows should be opened as soon as possible. This will speed up air convection and allow the moisture to be released quickly.

2. Hair dryer treatment

If there is not a lot of water in the solid wood floor, you can first use a dry rag to absorb the water, and then use a hair dryer to use cold air and blow it into the gaps in the solid wood floor. , blow dry the water, and then press heavy objects on the solid wood floor area where water has entered. It will recover after a while.

3. Disposal of garbage in the cracks

When paving solid wood floors, there will be some garbage in the cracks, so we must dispose of it in time to prevent the floor from expanding due to thermal expansion and contraction. space. Because over time, there will be garbage in the fine seams, and if it is filled with garbage, it will cause the solid wood floor to bulge. Therefore, we also need to clean the garbage in the small seams of the tiles, so that it will not expand due to thermal expansion and contraction. Solid wood floors bulge.

4. Remove the corner lines to deal with it

If the solid wood floor is too seriously soaked in water, then we have to remove the base lines to deal with the moisture on the floor and make them more durable. The good ones evaporate. In this way, the solid wood floor will have space to expand and contract, and the water inside can be better evaporated, so that it will be fine after 1-2 weeks. In addition to removing the skirting line against the wall, you can also pry up the waterlogged solid wood floor along the keel. If the area is too large, you need to pry up several surrounding solid wood floors together and let them dry naturally. After laying it back, it will affect other solid wood floors.

What to do if the wooden floor is soaked in water and bulging?

1. If the indoor humidity is relatively high, especially in the bathroom or kitchen, water is used more frequently, and the weather is humid, so in these areas The wooden floor installed in the place is prone to arching. Because the moisture cannot dissipate, it will penetrate deep into the wooden floor. Over time, it will cause the wooden floor to deform due to moisture and cause arching.

2. Another problem is that when laying the wooden floor, there are not enough gaps reserved, because the wooden floor itself has a certain moisture content, and expansion gaps must be left when laying to allow the wood to The floor is freely retractable. But if you don’t keep it or keep it small. This will cause the wooden floor to be unable to extend, causing arching problems.

3. It is related to unreasonable paving. If the paving area is relatively large and no segmentation measures are taken, or wooden floors are laid throughout the room without buckles under the doors, arching will also occur.

4. Improper maintenance of wooden floors or failure to clean them in time. Some people even use a dripping mop to mop the floor, which will cause water seepage inside the floor, causing the floor to swell and arch. question.

5. Disassemble, ventilate and dry. When the wooden floor bulges, you can remove the arching wooden blocks and surrounding floors. In this way, after a normal period of ventilation, the arching phenomenon can be alleviated. If the area is relatively large, If you pry up the floor, you have to wait until the ground and keel are solid before laying it back. When laying the floor, leave a small gap to give the floor room for expansion and contraction.

The above is the relevant content compiled by the editor on "How to suppress bulging wooden floors". There are many solutions to bulging wooden floors.