Traditional Culture Encyclopedia - Weather forecast - Minutes of electric power safety production meeting

Minutes of electric power safety production meeting

The power industry is a dangerous job, so we should always be alert to safety in production. The following is a brief report of the conference on safe production of electric power. For your reference.

Briefing of the conference on electric power safety production 1

Ningling County Power Supply Bureau 20xx March 1 day

I. Safety record

Through the joint efforts of all staff, the long period of safe production in our bureau has been realized, and there have been no casualties and equipment damage accidents, no traffic accidents and fire accidents caused by electricity, and no electric shock casualties in rural areas.

By February 28th, 20xx, the safety production record of 2978 days of continuous safety production has been achieved in the world.

Second, the safety activities

1. In order to ensure safe, reliable and orderly power supply during winter and spring, each unit organizes personnel to conduct self-inspection on hidden dangers of equipment defects, and * * * finds out hidden dangers 193 and eliminates them in time. On February 6, the bureau organized relevant personnel to check and accept the situation of eliminating vacancies.

2. On February 3 -4, 35kV lines and lines were eliminated in a centralized way. Director Cui and General Manager Liu personally conducted on-site command to eliminate defects, and safety supervisors conducted safety supervision in the whole process.

3. in order to strengthen? Two votes? Management to ensure? Two votes? The qualified rate, on February 9th, formulated and issued the "two-vote system assessment standards and methods".

4. On February 5th, the leading comrades of the county traffic police brigade were hired to train all drivers of our bureau on traffic regulations and safety knowledge in the conference room on the third floor of the bureau, giving them a vivid safety lesson, which made them have a deeper understanding of traffic regulations and improved their consciousness of observing traffic safety regulations.

5. In order to cope with the occurrence of bad weather and special circumstances during Spring Festival travel rush, an emergency plan was formulated to strengthen the duty during Spring Festival travel rush.

6. On February 25th, our bureau held a work conference on safety in production, and Director Cui made a work report on "Consolidating basic innovation management and comprehensively promoting safety in production to a new level".

The work of production safety in 2009 was reviewed and summarized, and the work of production safety in 20xx was mainly arranged and deployed.

Director Lian made a careful analysis of the current situation of safety production in our bureau, put forward strict requirements for the work of 20xx, and emphasized that safety production has only a starting point and no end point. When it comes to safety, we should start from now on, starting from everyone. Individuals should protect teams and teams, teams and teams should protect units, and units should protect enterprises.

During the meeting, the responsibility book of safety objectives was signed with all departments and offices, which broke down the safety work objectives for 20xx years and defined the safety objective responsibilities of all departments and offices.

7. In order to further do a solid job in safety production, comprehensively improve employees' safety awareness, and create a strong safety culture atmosphere, a safety motto collection activity was launched worldwide.

Three. Operation of power grid and equipment

In February, there were planned 20 blackouts, and the 10-35kV line tripped 7 times. In this month, 39 trips actually took place, 32 times exceeding the target.

Among them, the quick break is 16 times; Grounding 15 times; Over-current tripping for 7 times; Accident handling 1 time.

The causes of its fault trip are analyzed: 8 times of accident trip caused by the breakdown of lightning arrester and other porcelain materials; 14 tripped due to unknown accident; Eight trips caused by tree barriers; Tripping 6 times due to accidents caused by floating objects; Due to disconnection, the accident tripped twice; Accidents caused by overload tripping 1 time.

Fourth, test two votes.

In February, * * * accepted 24 working tickets, including 24 working tickets of the first category, 0 working tickets of the second category, emergency repair order 1 piece, and the qualified rate100%; 50 operation tickets, qualified rate 100%.

Safety priorities in May and March

1, to prepare for the spring safety inspection.

2. Strengthen the safety supervision of preventive tests in spring to ensure that all safety measures are put in place.

3. Standardize the management of safety personnel, strengthen the implementation of responsibilities, and formulate measures for the management of safety personnel.

4, strengthen the supervision and management of drought, temporary electricity use, and do a good job in the publicity of safe electricity use.

5, complete safety instruments.

6, strengthen the safety supervision of construction and maintenance site.

Do a good job of electrified wells and improve the project completion acceptance.

7. Issue safety review questions according to different positions and prepare for the safety exam in April.

Ningling county power supply bureau

20XX March 1 day

Minutes of electric power safety production meeting II

On June 365438+1October 3 1 day, the company held a 20xx professional work conference on safety production, summed up the work situation of the company's safety production in 20xx, analyzed the situation and existing problems, and arranged the key work of safety production in 20xx.

Cao, deputy general manager of the company, attended the meeting and delivered a speech.

Is 20xx fully realized? Twelfth Five-Year Plan? In the last year of planning goals, the company closely revolves around? Follow the rules as the key link, strengthen the foundation, and be pragmatic and effective? The overall work requirements, the implementation of various safety production control measures, the health status of power grid equipment, service support capacity and management level have been continuously improved, and no power grid equipment accidents of magnitude 5 or above have occurred throughout the year, and no vicious misoperation accidents have occurred. Power grid and equipment maintained safe and stable operation, and all indicators of peer benchmarking were comprehensively improved.

The benchmark of transportation inspection industry ranks 1 1 in the State Grid, which is 8 places higher than last year.

Cao pointed out what year is 20xx? Thirteenth Five-Year Plan? In the first year, do a good job in the whole year? Thirteenth Five-Year Plan? Development goals are of great significance.

In the new year, the professional work of safety production should fully implement the spirit of the two sessions of the company, the spirit of the work conference on safety production and the requirements of opinions on safety production, and continue to focus on the company? Ensuring safety, developing and strengthening services? Three basic tasks, persistence? Follow the rules, strengthen the foundation, be pragmatic and efficient? Work requirements, fully implement the responsibility system for production safety, focus on personal safety management and control, fully ensure the safe operation of large power grids, focus on improving the service capacity of distribution networks, comprehensively establish the equipment owner system, and standardize the order of production safety.

In order to thoroughly implement the work requirements of General Manager Qin Hongsan in three aspects: adhering to safe development, putting an end to personal accidents, and strengthening the management and control of hidden dangers and risks, and the spirit of the work conference on safe production, the conference emphasized six key tasks in 20xx: strengthening safety supervision and standardizing production order; Strengthen responsibility and pay close attention to the implementation of the work; Strengthen operational control to prevent personal injury; Strengthen the construction of main power grid to ensure the safe operation of large power grid; Do a good job in the construction, operation and maintenance of distribution network and the improvement of service guarantee ability; Strengthen the construction of transportation inspection and support capacity.

The meeting commended the company's advanced units in production safety in 20xx, winners of comprehensive labor competition for live detection of transportation and inspection, winners of 220kV substation operation competition, winners of labor competition in Power Safety Work Regulations, advanced collectives and advanced individuals in intensive management of rural distribution network operation and maintenance in 20xx, and presented awards to some winners on the spot.

The meeting also reported the results of the company's 20xx safety award review.

Wang Guofu, deputy chief engineer of the company, presided over the meeting, and Du Xiaofeng, deputy chief engineer of the company, attended the meeting. The heads of the relevant offices of the company headquarters, the main heads of the provincial maintenance company, the leaders of the relevant directly affiliated units and the municipal power supply companies in charge of safety production, the directors of the safety department and the transportation inspection department attended the meeting, and the Energy Conservation Institute and Huangshan Company made exchange speeches at the meeting.

Minutes of electric power safety production meeting 3

Recently, the group's special meeting on power safety production was held in the conference room on the 35th floor of the headquarters.

Wang Pingyang, executive vice president of the Group, and Qin Shixiao, vice president of the Group, attended the meeting and put forward requirements for the Group's power safety production.

Leaders of the safety committee office, safety production management department, engineering department and other relevant departments of the Group attended the meeting, and relevant personnel of the enterprises affiliated to the Group attended the meeting through on-site, video or telephone conference.

The meeting was presided over by Qin Shixiao, vice president.

The meeting first reported the related situation and existing problems of the main steam pipeline rupture accident and Shuangyashan electric shock accident in Dangyang Power Plant, Hubei Province. It conveyed the spirit of documents such as the Emergency Notice of the Comprehensive Department of National Energy Administration on Highlighting the Current Work Safety of Electric Power Production, the Notice of Shenzhen State-owned Assets Supervision and Administration Commission on Printing and Distributing the System of Monthly Situation Analysis Meeting of Municipal State-owned Enterprises on Work Safety, and the Notice of Shenzhen Municipal People's Government Office on Perfecting the Responsibility System of Party and Government for Work Safety, neglecting one post and shouldering two responsibilities, introduced the situation of metal supervision in power plants of the Group, and put forward requirements for existing problems.

The meeting requested all enterprises in the Group to conduct a comprehensive self-examination in accordance with Guangdong Electric Power Research Institute's Investigation and Evaluation Report on Metal Technology Supervision of Shenzhen Power Plant, Guangdong Electric Power Research Institute's Investigation and Evaluation Basis, and AWAP090 Shenzhen Energy Technology Supervision and Management, improve the technical supervision ledger and list, sort out the materials such as high-temperature and high-pressure pipelines, valves and joints for major and minor repairs, improve the management system of metal supervision contractors, and submit reports.

The Engineering Department, Ansheng Department and affiliated construction enterprises of the Group shall carry out special inspections on high-temperature and high-pressure pipelines, valves, pressure vessels and other equipment and facilities under construction to ensure the reliable operation of the equipment and facilities.

Group projects under construction should strengthen the supervision of ex-factory equipment, especially high-temperature and high-pressure pipelines, covered electrode and other equipment to ensure that the equipment is qualified; Strictly control the welding process review and on-site welding process supervision, strengthen the qualification review of welding team, and ensure the welding process is qualified and reliable.

All enterprises in the group should carry out equipment inspection with high frequency and intensity to eliminate hidden dangers; At the same time, make inspection records to ensure that all work is traceable.

The operation department should strengthen the control of operation parameters and operate in strict accordance with the operating procedures to prevent the equipment from overheating and exceeding the parameters.

Enterprise? Two votes? The qualified rate must reach 100%.

The meeting requested that all enterprises in the group must attach importance to safety production, conscientiously implement the spirit of the documents of the higher authorities, take the initiative, persevere, strictly control all management, ensure safety investment in place, earnestly implement safety responsibilities, and conduct strict safety assessment in light of their own safety production reality; Seriously carry out self-inspection and special inspection, establish lifelong responsibility system for equipment, strengthen safety technology management, and enhance personnel's safety awareness.