What is car crystal electroplating? Introduction of automobile crystal coating

Today, the car editor needs to give a brief introduction to his friends. Car editors should believe that many friends basically know that our car will be scratched inadvertently, so that crystal plating can be avoided. I think crystal plating is automobile crystal plating, which is to provide reliable sealing technology for car paint, ensure car paint efficiently and permanently, and avoid the relationship between environment and car paint color. A water drop experiment shows that the surface of car paint is still intact after 6 months of use. Let's learn about the advantages of car crystal electroplating with car editors.

Brief introduction of electroplated crystal for automobile: electroplated crystal

The crystallization of automobile paint is a concept different from painting, waxing and glaze sealing. The basic requirement of crystallization is that the material used is silica inorganic matter, and several structures can be generated on the building surface. Under normal circumstances, nanoscale molecules, through the action of polymers, will form an isolation layer on the surface of buildings after development and change. The isolation layer has the functions of ultraviolet resistance, oil resistance, low surface performance and hydrophobicity, which ensures automobile painting.

Repairing automobile glass: how to do it?

Specifically, most of the glass damage is caused by the car being rolled up by stones when driving at high speed. Although the stone is not big, it is extremely fast and irregular in shape, and it can often break the glass in an instant. However, the crack range of pebbles is mostly small, with a diameter of about 5 mm If this is the case, it is recommended to repair it as soon as possible. If the damaged body is more than 20 mm, the repair effect will be much worse, and most stores will advocate changing the glass.

Because, if small-scale cracks are not repaired, the cracks will become bigger and bigger due to external forces such as cold weather, high-speed driving and bumps in the later period, and it may be too late to repair them.

It is worth mentioning that at present, the front and rear windshields of automobiles are basically double-layered laminated glass, which can be repaired when there are cracks, but except for the front and rear windshields, most of the four windows are basically tempered glass. If you are hit by a stone, the damage will spread quickly or even fall off, and it will be irreparable.

At present, the key to repair automobile glass is to fill the cracks with liquid colloid and eliminate them. The material used to fill the glass is a liquid colloid with high transparency, which can be cured quickly by ultraviolet heating, and the strength can reach more than 90% of the original glass. The construction process is not necessarily complicated. The key tool is a needle-like vacuum syringe, which is used to pump air out of the glass wound and then fill it with glass repairing agent (liquid colloid). After repeated pumping several times, at least 90% of the repaired empty room will be filled with filling liquid. At this time, the filling liquid will be irradiated up and down for two minutes with an ultraviolet lamp to cure it. After removing the machine, there will be a small gap in the center of the wound. At this time, a high concentration of repairing agent is dripped to cover the glass plate. After drying with ultraviolet lamp, the surface layer is scraped off with a blade, coated with polishing agent and polished with a cloth.

Generally speaking, after a round wound is repaired, there will only be a small round mark or spider-like crack. Long cracks will only leave a faint line, and only under a certain reflective angle can you see the traces of repair, and most of them still see a&; Ldquo seamless &; Rdquo, good glass. But also can ensure the strength of the repaired part, and the strength of hardened plexiglass can reach more than 90% of the original glass.

However, this repair is limited. If the glass has been broken and separated, it is impossible to repair it further. If the crack is too big, the repair cost can even be equivalent to replacing the glass. At this time, it is better to replace the new windshield. Therefore, when there is a small damage to the windshield of the car, it is best to repair it as soon as possible.

Maintenance of automobile glass: maintenance methods of automobile glass

Winter deicing coup

The key reason why the car glass freezes is that there is still hot air in the car after people get off the bus, so that the car glass is still hot, and the snow falls on the glass and melts first. In the process of snow melting, the temperature inside the car gradually drops. When the temperature inside the car is close to the temperature outside the car, the melted snow on the glass begins to freeze. Experts advocate small partners to de-ice in winter. Physical deicing and chemical deicing can be done, but don't splash it with hot water, because it will easily damage the glass and bring unnecessary losses to friends.

Method 1 physical deicing

Little friends can prepare a hard plastic scraper. Of course, you can also use a special glass frost shovel. The glass frost shovel is more convenient, faster and does not freeze your hands. When there is ice and snow on the glass, use a plastic scraper or glass frost to remove it. However, experts remind friends to avoid scratching the glass when removing ice and snow. Plastic scraper or glass frost shovel should not be scraped back and forth, but should be pushed in the same direction.

Method 2 Chemical deicing

According to experts' brief introduction, there is a spray deicer on the market at present, which is a high-speed anti-icing spray concentrate specially designed for melting frozen windows and wipers, without damaging the surface of the car body and avoiding further icing and scaling.

At the low temperature of MINUS 30 degrees, ice and snow can be easily removed. At the same time, it can prevent the windshield and water from freezing, without damaging the surface of the car body, and the cleaned glass is clean and scratch-free.

Method 3: Keep the temperature inside and outside the car consistent.

Experts advocate that small partners leave without locking the car after one day of use. Instead, open the door to ventilate, wait until the temperature inside the car is almost the same as that outside the car (that is, about one minute), then turn on the power and brush the snow water on the windshield with a wiper. At this time, close the door and lock the car. The next morning, as long as the snow on the windshield is swept away, there will be no ice under the snow and you can drive on the road immediately.

The simplest and most economical way is to cover it with a windshield partner.

It's a windshield companion sold in the market, and people around me told each other that they basically found one on Taobao. Adopt national environmental protection materials, resist the low temperature of MINUS 40 degrees, and double cream snow. Just cover it gently, open it gently in the morning, fold it and put it in a packaging bag, and the hot car can start. Save time and fuel. For friends who don't want to reach out and toss themselves and love cleanliness, it is the best choice in cold weather.

Maintaining the front windshield of a car, I think it is to maintain the rain cover. If it is well maintained, it will basically be good for the rain cover and windshield, and prolong the service life of the rain cover. My experience is to wash the glass often. Every time you go out for a long trip or walk, you need to predict whether there will be a rainy climate, and wash the glass with water to prevent rain. My poncho is still the same. It has been used for more than seven years now, and it can continue to be used. Car maintenance needs to consider saving money. If you want to save money, you need to maintain your car frequently. If you are right about the car, it will also save you money.

1. Use special or suitable wiper blades and replace them immediately (usually once a year) to prevent scratching the front windshield;

2. Always adhere to the front file hygiene. If something gets stuck, try not to use the wiper to deal with it. Try to take them away carefully with a towel or something.

It is necessary to use glass water for cars. This can adhere to a clear vision, increase ride comfort and reduce front gear wear;

4. Before using the wiper every time it rains, it is best to wipe off the dust and other things on it first, so it is impossible to scrape the front block;

5. Put a mark on the front gear, etc. Please use electrostatic film to avoid accidentally scratching the front gear when removing the glue.

6. It is best to cover the front windshield with clothes and some newspapers in winter to avoid defrosting and damaging the front windshield.

7. Don't touch, follow behind the cart to prevent stones from falling and hitting the front windshield.

8. Take out your glass, take risks and prepare for the final rescue measures. When you use the right glass water, you don't have to dry clean it from time to time. If sundries are lost, you can gradually remove them with a knife.

Well, today, a friend of Bian Xiao Auto briefly introduced how to remove the electroplated crystals on the car glass, and that's all. I don't know if they know more about how to remove the plated crystal from the car glass after listening to the brief introduction of Bian Xiao Auto. I hope the profile of Bianxiao Automobile can help my friend. If you want to know more, pay attention to this website. Bian Xiao's car is waiting for you here!

Million car purchase subsidy