Make enough food and clothing by yourself, install an insect-proof net on the water tank of the Outlander, and talk about your experience with the car.

Mosquitoes often walk at night in summer, and many bugs fly into the radiator of the water tank.

Summer is here and mosquitoes are everywhere outside, especially when walking at night. Many bugs are attracted by light sources. Flying into the car, I checked the Outlander's air intake grille after a night trip and found that there were a lot of mosquito corpses on the radiator fins of the water tank inside. If this continues for a long time, it will definitely be detrimental to the heat dissipation of the water tank. So I sought advice from a powerful company and saw several water tank insect screens suitable for Outlander. Since I am very concerned about the disassembly and assembly of parts in my new car, I found an insect screen that I can install myself without removing the front bumper.

I found a cool and open place and prepared to install an anti-insect net myself

The Outlander is very sharp from this angle

The omnipotent treasure is so powerful. Got it in two days. While the weather was not too hot, I drove the car outside to an open area and slowly installed it myself. To be honest, I think I have pretty good hands-on skills. I believe that a small insect-proof net will not be a problem for me, let alone this insect-proof net. The promotion is that you can install it at home. [Proud]

Big guy with great wisdom

The big chrome decoration on the front face is domineering and leaking to the side

No one is ready to do it [heehee]

The car should be cleaned, it is very dirty

First, remove the guard panel at the front of the engine compartment

Follow the instructions in the manual, first remove the fender at the front of the engine compartment Remove the small protective plate. This very simple small protective plate is fixed with snaps. Use a flat-blade screwdriver to lift it out. The anti-insect net on the front bumper, which does not need to be disassembled, has three meshes, one large mesh inside the large air intake grille, and one small mesh on the left and right sides under the license plate. Follow the steps to install a large piece of grid first, put it in diagonally through the gap next to the hood switch and keep the position in place without letting go, then use a special buckle from the outside to insert it into the small hole reserved on the grid. Just put the middle piece first Once the hole is fixed with a buckle, it can be released, and it is much easier to install other holes next to it.

Remove it and put the anti-insect net diagonally through the gap in the front

The installation of the large mesh of the air intake grille was very smooth and completed in one step. Next, we only need to install two small grids. It is not so easy to install these two small grids, because it is not easy to use force at the bottom. I placed it several times in succession without holding it down, and the grid fell to the engine guard. on the board.

No-disassembly front bumper insect net purchased online

The actual picture, one *** three pieces, the top one is large and the bottom two are small

This This kind of insect-proof net can be installed without removing the front bumper. Just put the three grids inside and fix them with buckles according to the holes on the grid.

A large insect-proof net is installed on the upper air intake grille

The large insect-proof net on the air intake grille is installed, and the effect is quite good. It firmly blocks the entry from the outside. to the gap between the radiator fins of the water tank. The grid is made of metal, so you don't have to worry about being broken by bugs.

There are two small grids on the left and right below the license plate. The red circle in the picture is the hole reserved for the fixed buckle.

Use buckles to fasten the insect-proof net from the outside

The two small grids on the left and right under the license plate took me a lot of effort to install, because from the upper part of the engine compartment It's too deep. My arms are a bit thick and it's a bit difficult to reach in. It would be much easier if two people worked together. It was best to hang it from the outside with the help of tools. After many attempts, I finally installed it. I want to complain about the seller here. The number of buckles sent is less than the number of holes. They can only be fixed with straps. Although the straps are more secure, they are not as beautiful as the original buckles, so just use them. It's not very noticeable down there anyway.

Rendering on the right

The air intake grille is easy to install

Look at the rendering after my installation. Although the weather is not very hot, Bo was already sweating profusely after the operation. I feel very satisfied when I see the fruits of my labor. [Hehe] You no longer have to worry about being bothered by mosquitoes when walking at night. Another advantage of this metal insect-proof net is that it can block flying stones, so you don’t have to worry about the stones damaging the radiator of the water tank. It is recommended that if there are riders who need to install it, it is better for two people to operate it together.

My expressive ability is limited, so my writing may be a little messy, so please forgive me! [Holding fists]

The two small grids under the license plate are a bit difficult and the gaps are relatively small

They are properly installed