Is the new water-based matte paint affected by the weather?

The new water-based matte paint is affected by the weather. Because it is rainy and humid, it will affect the effect of matte paint, and it is not easy to dry out. Although the temperature is relatively high, it belongs to the humid climate in the south, and there will be a lot of water vapor in the air, so it is easier to form bubbles when using bright paint, and the overall effect after painting will be greatly weakened.

There are two ways to spray new waterborne matte paint.

The first is thin spray. When spraying thinly, the model is about 30 cm away from the nozzle, and the model is covered by spray. After spraying one layer, wait about 5 minutes before spraying another layer, so that after 7 to 8 times, the model's matte paint will be sprayed. Thin spray is more suitable for vegetarian players, because it is far away, so the waste of paint will be greater. The whole assembled model can be sprayed with the film, which can effectively reduce the consumption of varnish.

The second is wet spraying. It is usually used to deal with a single part. At the position near the nozzle, the varnish is sprayed in the range of about 10 cm, so that the liquid film is formed on the parts without solidification, but without accumulation. Dry for 10 minute, then spray for the second time and repeat for three times. One of the advantages of wet spraying is to save varnish, and the other is to effectively reduce the gap between the water sticker and the model.