What does 505 glue stick to?

Model 505 adhesive material type classification: glass, electronic components, leather, stone, wood, other materials and ceramic resin adhesive.

505 waterproof glue has strong performance and excellent application effect. However, in order to make the product play its greatest role in the construction process, it is necessary to master the correct use method. The following steps are worth learning!

First of all, if it is used on exterior wall tiles, the base surface needs to be cleaned to ensure that there is no oil and dust, and it should be kept dry. When cracks need to be repaired, the wall should be cleaned and leveled, and painted by hand with a brush. Perhaps it can also be sprayed with professional high-pressure spray, so that the base surface can be soaked and completely covered.

Secondly, if it is used on the base surface such as cement, it is necessary to dry the base surface to ensure that the base surface is very firm. When encountering uneven and cracked places, you need to scrape waterproof putty. Generally speaking, when you brush it formally, you can brush it two or three times. Please note, however, that after the first brush, you must ensure that the coating is completely dry and firm, so as not to touch your hands, and then you can do the second brush. When painting, you can't just draw in one direction, you need crisscross work. After the last layer of paint is dry, you can brush the next layer. However, the time between two applications should not exceed 36 hours. In case of rainy and humid weather, the construction needs to be suspended.

Finally, after the waterproof layer construction, the whole project needs to be carefully inspected. Especially in the gap, be extra careful. There should be no brush leakage, delamination, cracks and other phenomena, once it appears, the reasons should be checked and repaired in time.

This is the main step when using 505 waterproof glue. Only by learning to use this product correctly can we get better results. In addition, it should be noted that in the construction process, it is necessary to ensure that the entire base surface can be coated with waterproof glue and cured for 24 hours, and the next project can be carried out only after it is completely dried. In addition, if the construction base requires high wear resistance, it needs to be protected by hardening layer.