Automobile turning skills and matters needing attention

Traffic accidents are prone to occur in turning sections, so it is necessary to slow down when driving in turning sections. What turning skills and precautions do cars have?

How to deal with normal road intersection driving?

When turning left and right at the intersection, the driver must turn on the turn signal.

1. Turn left: When turning left, in addition to changing lanes in advance and turning signals, when waiting for a turn, drive as close to the center of the road as possible to facilitate the passing of the following car.

2. Turn right: When turning right, you should not only merge into the outer lane in advance, but also turn right to remind passers-by. Slow down when turning right, and pay attention to the influence of inner wheel difference when turning to avoid rubbing against pedestrians.

What about turning when there is a steep slope?

There are too many roads in the city, and I occasionally go into the mountains to play. I was really scared to death when I met a steep turn. The risk factor of sharp turns is high. How can I drive safely? Please note the following points:

1, downshift and deceleration: When we are about to enter the ramp, we should not only slow down the car, but also change the gear to a low gear.

2. Honk the horn: Because sharp turns are mostly mountain roads, it is difficult for you to see if there is a car coming from the opposite side, so you must honk the horn for a long time before turning to tell the opposite driver that there is a car passing by to avoid collision.

3. One-time arrival: turning on steep slopes is the most taboo. Try to turn in one step to avoid accidents.

How to deal with turning in and out of blind spots in residential areas and other places?

There are not only many cars in the community, but also many old people and children. Car owners must pay attention to entering and leaving the community.

1, slow down and observe more: first of all, slow down in advance and observe more surrounding conditions. There are often old people walking and children playing in the community. At the same time, the roads in the community are relatively narrow, and various sundries are piled up on the roadside, which will limit the driver's driving vision. Therefore, if the owner tries to slow down and keep a distance from the debris pile as much as possible to avoid stray cats, dogs and children popping up suddenly.

2. Turning reminder: When turning, the car mainly honks in advance to remind residents to pay attention to the driving standard of the community.

How to deal with turning in special weather?

1, rain and snow slush: In case of rain and snow, be sure to avoid slamming the steering wheel and stepping on the brakes. You should use the traction resistance of the engine in advance to reduce the speed and avoid sideslip and rollover.

2. Smoky days: The visibility is low in foggy days, so you should slow down when driving, and turn the turn signal in advance when turning left and right. In severe cases, you can turn on the headlights during the day to improve your driving vision.

Automobile turning skills and matters needing attention

1, when the car turns, the steering wheel should adapt to the curvature of the road and the driving speed, so that the steering angle is appropriate, the steering timing is appropriate, and the steering is timely. Do not leave your hands off the steering wheel, so as not to deviate from the direction and cause danger.

2. When the car turns, the speed should be slow, and the steering wheel should not turn too fast, so as not to cause the car to slip due to excessive centrifugal force. If the car skids, you should immediately release the accelerator pedal, hit the steering wheel to the side where the rear wheel skids, and then return to the steering wheel to continue driving after the car resumes its straight driving direction.

3, the car should try to avoid using brakes when turning, especially emergency braking, to prevent side slip or accidents.

When the car turns, the driver should have a correct estimate of the track of the wheel. Generally speaking, there are two factors that limit the rotation angle:

(1) Minimum turning radius: refers to the radius of the track taken by the front outer wheel when the car turns and the steering wheel turns to the limit position. It represents the ability of a car to turn around in the smallest area, and the ability to pass through narrow curved areas or bypass obstacles.

(2) Inner wheel difference: it is the difference of the arc radius traveled by the inner front wheel and the inner rear wheel when the car turns.

When turning a car, we should fully estimate the minimum turning radius and inner wheel difference of the car according to the terrain, especially when turning sharply or driving a trailer or semi-trailer, we should pay more attention to prevent the outer front wheel from rushing off the road or colliding with other obstacles, and at the same time avoid the rear inner wheel from falling off the ditch or colliding with obstacles.