Why can't the gas stove catch fire and leak?

It may be because the hose is not tightly connected to the gas stove. It is also possible that the hot weather caused the hose to be damaged. Secondly, it may be that the rubber ring of the hose is loose, resulting in air leakage.

1, firstly, check whether the hose is tightly connected with the gas stove, and secondly, check whether the hose apron of the gas stove is not tight, resulting in air leakage. Check whether the gas pipeline is in close contact with the on-off valve. If it is too hot, the hose will be damaged or burst. At this time, it is necessary to replace the hose in time.

2. Check whether the valve of the gas stove is damaged. Be sure to turn off the gas stove during the inspection to avoid ignition. Check whether the gas stove has over-voltage protection function, and if so, replace a pressure reducing valve. Secondly, check whether the gas pipe is blocked. If it is a gas pipe problem, it is necessary to dredge or replace a new gas pipe in time.

3. Check whether the gas stove has accumulated a lot of dirty things or is flooded. If the pot overflows when using the gas stove. At this time, the gas stove will go out, and it will take some time to turn on the gas stove to see if it can be started normally.

4. Regularly clean the oil stains and stains on the gas stove, and then clean the gas stove outlet. Prevent backfire caused by blocking the fire hole and damage the panel.