How to remedy bulging wooden floors

How to remedy bulging wooden floors

How to remedy bulging wooden floors? Many decoration users will choose to use wooden floors when decorating, but often the wooden floors will be used for a long time. Paint cracking occurs, so remediation is a big project. So, let’s share how to remedy bulging wooden floors. How to remedy bulging wooden floors 1

1. What are the tips for repairing bulging wooden floors

1. Remove the arched wooden blocks and place them in a ventilated and dry place to alleviate the arching problem. If there is arching in a large area, wait until the floor is dried and leveled. If the arching is severe, new flooring will be needed.

2. If the expansion joint is blocked, clean the dirt inside.

3. When repairing the floor or dismantling the old floor, you must first level it with cement and then lay the new floor.

2. What are the reasons for the bulging of the floor?

1. Swelling due to moisture

When the weather is humid, the floor is susceptible to damage. Moisture in the air causes expansion. And when using water, prolonged contact between water and the floor will cause the wooden floor to swell. Therefore, if the base layer has not been dry before laying the floor, or the base waterproof layer has not been completed, it will directly affect the base foundation.

2. The reserved gaps are too small

When laying wooden floors, some gaps must be reserved for each board, because the boards will change due to various Expansion and contraction occur due to various factors. Some owners will ask workers to reduce the joints for the sake of aesthetics. In fact, once the wooden boards expand, they are prone to bulging problems, so some gaps must be reserved when laying wooden floors.

3. Large-area wooden floors are not laid in sections

When floors in multiple areas of a room are laid together, there is no need to use buckles, but If the ground has not been thoroughly cleaned before installing the floor, you must first clean up the materials on the ground. If the base of the floor is bulging, it means that the maintenance of the wooden floor in daily life is not appropriate enough, which will lead to wooden flooring. The reason for the bulging floor. How to remedy bulging wooden floors 2

How to maintain solid wood floors

Solid wood floors are high-grade and stylish, but they are troublesome to maintain. There are some maintenance aspects that you may not have considered, and some Maybe you have encountered it but don’t know how to deal with it.

(1) Keep the floor dry and clean. Do not wet the mop with water or scrub with alkaline water or soapy water to avoid damaging the brightness of the paint and damaging the paint film. If there is dust or dirt, you can wipe it with a dry mop or a well-wrung wet mop. Apply wax once a month (or two months) (wipe away moisture and stains before waxing).

(2) If the heater leaks or there are water stains on the floor, it must be wiped clean in time. Do not expose it to the sun or bake it directly with an electric stove to avoid drying too quickly and causing the floor to crack.

(3) If no one lives there for a long time, do not cover it with plastic sheet or newspaper. The paint film will become sticky and lose its luster over time. At the same time, do not put hot water basins, hot rice cookers, etc. directly on it. The floor should be padded with wooden boards or straw mats to avoid burning the paint film.

(4) If the local floor surface is accidentally stained, it should be removed in time. If there is any oil stain, you can wipe it with a rag or mop dipped in warm water or a small amount of washing powder. You can also use medium Scrub with soapy water and a little detergent. If the stain is serious and this method is ineffective, you can use high-quality sandpaper or steel wool to gently wipe it. If the stain is caused by drugs, drinks or paint, it must be removed before the stain penetrates into the wooden surface. The removal method is to wipe it with a soft cloth dipped in furniture wax.

If it still doesn’t work, use a steel ball dipped in furniture wax to rub it. If the surface of the floor is burned by cigarette butts, wipe it hard with a soft cloth soaked in furniture wax to restore the brightness. If the ink is contaminated, wipe it with a wax-soaked soft cloth in time. If it is ineffective, you can use a steel ball dipped in furniture wax to wipe it.

(5) After laying the painted floor, try to avoid direct sunlight to prevent the paint from being exposed to excessive ultraviolet rays and causing early drying and aging. Furniture placed on the floor should be padded with rubber or other soft objects to prevent scratches on the floor paint.

(6) During the use of the floor, if you find that individual floors are warping or falling off, you should pick up the floor in time, shovel off the old glue and dust, apply new glue and compact it; If the paint film is damaged or exposed, you can use 400-grade water sandpaper dipped in soapy water to polish it, then wipe it clean. After it dries, perform partial color touch-up. After the color dries, apply another layer of paint. After drying for 24 hours, use 400-grade water sandpaper to polish it. , then apply wax for polishing. How to remedy the bulging wooden floor 3

1. How to repair the bulging floor

1. If there is a bulging problem on the floor, first we need to clean the expansion gap, which may be blocked. If it is stuck, the paved wooden floor cannot be stretched, and arching will occur. Cleaning is also very simple, you only need to clean up all the sawdust in the gaps.

2. If there is a problem with water soaking, you need to ask the masters to remove all the holes in the floor. First blow away all moisture and water stains inside and air-dry the wooden floor.

However, if the floor deformation problem is very serious, it is necessary to disassemble the surrounding skirting lines to release all the moisture on the ground

And to restore the arched areas, it is necessary to re-lay floor. However, if the arching problem is not particularly serious, you can use a hair dryer to clean the gaps directly, and then use heavy objects to suppress them to restore the bulging areas to their original appearance.

2. Why does the wooden floor bulge?

1. The bulging phenomenon of the wooden floor is related to many factors, such as humid weather or In bathrooms and kitchens, because water is used more frequently, the air is more humid. If it accumulates indoors for a long time and cannot be dissipated, it will penetrate into the wooden floor. Over time, it will cause the wooden floor to become damp and cause deformation and arching problems.

2. It may also be caused by unreasonable expansion joints when laying the wooden floor at the beginning. Although there is a type of flooring called seamless flooring, it does not leave any gaps when it is actually laid. Because wood has a certain moisture content, it will suffer from thermal expansion and contraction due to the influence of the environment in the future, so the reservation must be accurate. Otherwise, the floor cannot stretch and arching will occur.

3. It may also be caused by unreasonable laying by the masters when laying the floor, or improper maintenance of the floor in the future, insufficient cleaning, and long-term water stains penetrated. This will cause the floor to expand and buckle.