Graduation thesis work summary

Compilation of five graduation thesis work summary templates

Whether in study or work, everyone has written a paper, and must be familiar with various types of papers. The process of writing a paper It is the process by which people gain direct experience. So the question is, how to write an excellent paper? The following are 5 graduation thesis work summaries that I have compiled for you. They are for reference only. Let’s take a look.

Graduation Thesis Work Summary 1

The construction of urban roads and bridges in our district involves 99 projects, including 10 Class A projects and 89 Class B projects. They will be re-drained in June. 12 projects have been suspended or delayed (edited), covering four major aspects: urban planning, urban facility construction, key construction projects, and urban environment beautification. The relevant situation is now reported as follows:

1. The work situation of the previous stage. Although affected by this year's national macro-control, tight land and funds, and difficulties in land acquisition and demolition, the construction of urban road and bridge projects was carried out by all relevant units. With great attention and full promotion, the overall completion situation is still good. As of the end of September, 15 projects had been completed or basically completed, 30 projects were progressing smoothly according to the annual plan, 31 projects had delayed implementation due to reasons such as funds, weather, planning adjustments, etc., and 11 projects were delayed due to land policies, land acquisition, etc. Demolition and other major problems seriously delayed the construction period or made it impossible to advance.

(1) Urban planning preparation. The overall completion is relatively good. The road and bridge zoning plan, the detailed plan for the new administrative and cultural center block, the control plan for the western expansion of the Far East Commercial Plaza, and the urban design of the commercial block in the Central Industrial Zone have passed the joint review and been submitted for approval; the road traffic special planning plan The special plans for water supply and drainage are under design commissioning. The village layout plan and the Jinqing Town master plan have been basically completed, and the preparation of other plans has also gone smoothly.

(2) Construction of urban facilities 1. Construction of transportation facilities. Due to the shortage of electricity, the progress of the first phase of the Binhai Avenue project has been affected. The roadbed and bridges have been completed, and the bidding for the traffic safety facilities project has been completed. It is expected to be completed in November; the reconstruction project of the northern section of the Jiao-Xin Highway, Luqiao Airport, and Luze The north extension project of the highway and the reconstruction project of Jiaoxin Highway from Quanjing to Xinqiao are subject to land policy restrictions, which affects the progress of the entire project; Shuangshui Road (Yin'an Street-Xu Wengjing) involves the demolition of village houses such as Houcai, Qiancai, and Sanjiaochen. , is currently suspended; the west extension of Tengda Road is currently suspended due to factors such as the demolition of Xu Weng village houses and land; the northern extension of Yin'an Street is not yet started due to the demolition of Cai Yu's houses; the roadbed filling, drainage and sewage discharge of Central Avenue have been completed. The progress is relatively smooth and can be completed before the end of the year; two semi-circular arc roads in Yangye Village are undergoing roadbed filling. 2. Construction of water and electricity facilities. The second phase of the municipal water supply project has completed the pipeline laying measurement, land measurement and assessment of young crops in the pipeline, and has been submitted for approval of land conversion for agricultural use; the water supply guarantee project has been completed on time; the urban sewage interception project has made good progress, and unit sewage discharge has basically been completed The pipeline acceptance project, Luoyang Main Pipe, Tongyu Main Pipe, and Yingbin Avenue East-West Extension Main Pipe have been completed, Fengjiang Main Pipe and Yinghua Road Main Pipe have completed more than half of the project volume, 1# pumping station has been completed, and 4# pump The station has completed 50% of the project volume; the second phase of the sewage project is in the preliminary preparation stage; the pipeline gas project has laid 300M of main pipes, 70% of the Wangjingwan community courtyard pipe network has been completed, and the Xin'an Anzhu community courtyard pipe network has been completed ; The construction of electric power facilities is generally progressing well. The main control building of 220KV double water transformer and 110KV horizontal street transformer is about to be completed. The construction of urban distribution network has completed 9 switch stations and 6 lines.

3. Construction of social public facilities. The preliminary design of the third phase of the landfill project has been completed; the Luqiao Primary School expansion project and the Tongyu Central Primary School relocation project both have insufficient funds. Nanshan Primary School has been suspended due to unguaranteed funds; the Enze Medical Center has completed the project approval and reporting work, and the disease control Preparations for the bidding for the civil engineering construction of the central office building have been completed, and the land acquisition and reporting work for the relocation project of the Second Hospital has been completed.

(3) Key construction projects. Part of the progress is relatively smooth. For example, the Century Building has completed the preliminary survey and scheme design and can start construction before the end of the year. The roof of Sanyou Building has been completed. 40% of the pile foundation work of the Electronic Digital City has been completed. The Municipal Textbook Distribution Center has been built to the third floor. Half of the pile foundation project of the Quality and Technical Supervision Building has been completed, 19.703 million yuan has been invested in the expansion of the Furniture City, piling has started for the second phase of the plastic chemical market, 360 million yuan of investment has been completed in the Shanshui Huating Community, and some multi-story buildings have been roofed; The slag filling in Shuitian Yise Community has been completed and test pile driving has begun. Some projects face great difficulty in advancing due to outstanding demolition issues. For example, the commercial bank building plan has been reviewed, but the demolition of 22 houses in Songtang Village has not been implemented; the Yufeng Building plan has been adjusted, and the demolition of 5 houses in Songtang Village has not been completed; the construction plan of the second phase of the Decoration City is being adjusted, and the land acquisition in Houcai Village The demolition has not been implemented; the land acquisition work will begin for the reconstruction of the old Longtouwang Village, but it is difficult to proceed because the location of industrial enterprises and schools has not been confirmed. Some other projects are still in the early stages, progressing slowly due to land, policy and other issues. For example, the East China Plastics City plan is being adjusted and the owner has not yet been determined; the planned site selection of the China Private Economic Development Forum has been submitted to the Municipal Bureau and is preparing for geological exploration; Enze The medical center is still undergoing project approval.

(4) Urban environment beautification. Due to the impact of the flood season and the difficulty of policy processing, the progress of the river improvement project is slightly lagging behind

; the construction of Century Park and Cultural Park has been suspended due to the undetermined location; Nanshan Botanical Garden, Huamuqiao Huamu Road, and Mountain The construction of tourist trails and scenic spots has been basically completed; Chengdong Park, Lianhuashan Ecological Sports Park, and Xiaowang Ecological Residential Area are in the early preparation stage; the old city reconstruction and housing resettlement projects are relatively tight and the construction is difficult; Lubei Sanshan Community, The demolition of Cangqianche'anzhu Community was not completed, which affected the construction of the project.

2. Work measures for the next stage. Compared with the progress plan scheduled for the year of modernization promotion, many urban road and bridge construction projects are lagging behind, and it is difficult to complete the tasks. There is not much time left. In the last quarter, we will focus on the existing problems, identify the focus, break through the difficulties, and take strong measures to better complete this year's work.

(1) Unify thinking and strengthen leadership. Many of our projects involve towns (subdistricts) and relevant departments, as well as owners. Although each responsible unit and person is clearly defined, in actual operations, due to insufficient leadership attention, misalignment and absence often occur. A lot of valuable time is "lost on the road", resulting in project delays. Therefore, we must further unify our thinking, strengthen leadership, combine agency efficiency building, strengthen the responsibilities of each department, think in one place, work hard in one place, and speed up the advancement of various projects.

(2) Strengthen measures and make every effort to promote them. We will try our best to solve the problems of each project and take effective measures to solve and implement them one by one. For example: for projects delayed due to funding problems, we will increase fund raising efforts through land auctions, bank loans, etc., learn to walk on multiple legs, and solve the funding gap problem; for projects that are affected by land acquisition and demolition issues, the progress of the project will be affected. , on the basis of fully completing the ideological and political work of the relocated households, we must concentrate our efforts and push forward strongly in accordance with the law; for projects that have been delayed due to policy restrictions, we must strengthen the preparation for planning, project approval, etc. Strengthen communication and flexibly resolve issues such as policy constraints.

(3) Highlight key points and strengthen supervision. We will further streamline construction projects, highlight some projects with slow progress, many difficulties, and tight deadlines, concentrate specialized efforts, fully coordinate with multiple parties, and strive to resolve some deadlocks. And strengthen supervision and inspection, speed up the advancement of various projects, in order to achieve practical results and ensure the completion of various tasks of urban road and bridge construction. Graduation Thesis Work Summary Part 2

1. The topic selection must be accurate. As the saying goes, a good start is half the battle. The same is true for essay writing. Choosing an appropriate topic is one of the keys to writing a good essay. Everything is difficult at the beginning, that is, when selecting a topic, you must consider many factors. It must not only conform to the development trend of theory, keep up with the pace of the times, have certain novelties, and have certain academic value; but it must also conform to your own actual situation. You have a certain amount of professional knowledge, or you are interested in it. When selecting a topic, you must conduct in-depth arguments. The topic should be moderate. It should not be too difficult to write down, but it should not be too superficial to have little research value. This means that you need to tailor the topic based on your own situation and, under the guidance of your instructor, choose a topic that suits your actual situation. Once the topic is determined, we must establish goals and confidence, and write it down firmly. It is inevitable to encounter difficulties in the writing process. We can only conduct further investigation and research to find solutions to difficulties. We must not hesitate, hesitate, or change the topic midway. , change the general at the last moment, that is, if you have to, do not change the topic midway, which will distract your energy. You must believe in yourself. The selected topic has a scientific basis, and you have the ability and confidence to write it down. This point, Confidence is the most important, it is the motivation and support for our paper writing.

2. The research ideas must be clear. After the topic is selected, we will conduct an in-depth discussion around the paper. The idea is the most important, and the idea determines the way out. When writing a paper, there is always an idea, whether it is in chronological order, historical development order, combat action order, or logical order. This depends on the actual situation of your paper. Only when the research ideas are clear can you carry out the discussion around the main body. This is also An overall grasp of the paper will prevent the writing of the paper from deviating from the topic, so that the form is scattered and the spirit is concentrated. According to the research ideas, we can list the titles of the paper at all levels.

3. The viewpoint must be clear. In the process of writing a paper, you must be good at summarizing your opinions in concise words and dare to express your opinions. That is, your opinions must be reflected between the third-level titles of the paper. Do not hide your opinions in the middle of the text. Make sure that readers know what you wrote and what opinions you expressed after reading your outline. We should not follow others' opinions, talk in general terms, and talk for a long time without knowing what we want to express. All our work is to serve our central argument and sub-argument.

4. The arguments must be sufficient. Thesis papers focus on argumentation. This is very different from when we write textbooks. The focus of the textbook is to solve the "what", while the focus of the paper is to solve the "why".

The paper does not need to be as comprehensive as the textbook, it does not need to be complete, but it must show its own point of view, explain the truth clearly, why it is such a point of view, and the evidence must be sufficient. We can use reasoning, facts, and examples. To make arguments, ancient and modern, Chinese and foreign, historical, present, and future can all be used to demonstrate. Only with sufficient arguments can our paper appear full and our arguments can be tenable.

5. Identify the innovative points of your paper. The innovation or improvement points of your thesis are the shining point of your thesis and the core part of your thesis. Generally, 3-5 innovation points are enough for a master's thesis. This requires in-depth thinking from a certain height. , you need to propose new ideas, new methods, and new measures. The quality of your innovations also determines the level of your academic research and the quality of your paper to a certain extent. It is also something that must be reported during your thesis defense. This is also Something to catch the eye of an expert professor.

6. Reasonably learn from and cite the achievements of others. Stones from other mountains can be used to attack jade. While we possess the data and documents, we must learn from the strengths of others and conduct further research. Newton said that the reason why I can see farther is because I stand on the shoulders of giants. When we argue, we can generally use the methods of induction, summary and deduction. When we see several similar viewpoints, we can summarize and summarize them to find out their consistency and draw their rules. Then It's my own point of view. From a piece of content studied by others, we can make associations and deductions. Can we also extend and learn from the things I study? When quoting other people's research results, you should generally follow a principle. If you quote other people's arguments, you cannot cite their arguments. If you quote arguments, you cannot cite arguments. This can avoid unnecessary trouble.

7. The details should be appropriate. It doesn’t matter how high the mountain is, there will be immortality if there are immortals. It doesn’t matter if the water is deep, there will be spirit if there is dragon. The length of the article does not matter, as long as it has new ideas. When writing a paper, never judge the hero by the number of words. The number of words is just a facade. The key is the content. Where the paper is innovative, it should be emphasized. The other parts of the paper should be appropriate, detailed and appropriate, with relaxation and relaxation, and focus on the content. , rich ink and colorful, related content, just a little bit of water, don't let a bowl of water be flat, we must learn to play the piano. A truly good paper is just like a beautiful woman you see. One part is too fat and one part is too thin. It is just right. Instead of trying to make up for the word count, resolutely delete any necessary or unnecessary things. Don’t leave them occupying space and wasting readers’ time.

8. Combine qualitative and quantitative analysis. Most military science papers basically have the characteristics of science and engineering papers. Qualitative research is often not enough, even if it is just a mess, it is not convincing enough. We must borrow mathematics and computer-related knowledge to conduct quantitative analysis, calculation and simulation to get the results. This is also the spirit of natural scientific research. Speak with facts and avoid falsifying or tampering with data. This is not allowed by academic ethics.

9. Use charts skillfully. The function of the icon is to be concise and to the point, to vividly reflect the research problem, to make it clear and pleasing to the eye. If we compare our paper to a movie, then the icon is the episode of the movie, which is very important. A paper without icons, a paper with pure text throughout, is a bit unsatisfactory to read, as if there is only one kind of pure text. Color, without color, is like watching black and white TV, it looks a bit vicissitudes. The role of charts in the paper is very important.

10. Footnotes and references in the text should be comprehensive. In thesis writing, it is impossible not to quote other people's opinions, but it is marked in thesis writing. This is the need for research and cannot be counted as copying. But there must be a note, and the source of the document must be indicated, down to the page number, otherwise it will be easy to be suspected of plagiarism. Generally speaking, large paragraphs of quotations cannot appear in quotations. It is best to convert them into your own language and express the meaning. The article tells the story of the ages, knowing the gains and losses. There is no shortcut to writing a thesis. You can only take it one step at a time and complete it seriously. The hard work of the tutor and the author is condensed between the lines of the paper. Every hard work will bring you a harvest. I wish the brothers and sisters fighting side by side a smooth passage! Summary of Graduation Thesis Work 3

In March XX, I started working on my graduation thesis. As of today, the thesis is basically completed. From the initial confusion, to slowly entering the state, and then to the gradual clarity of ideas, the entire writing process is difficult to express in words. After several months of hard work, the intense and fulfilling graduation project finally came to an end. Looking back on my experiences and feelings during this period, I am full of emotions. In the process of this graduation project, I have countless unforgettable memories and gains.

At the beginning of March, during the exchange and discussion with my instructor, my topic was decided, which is: Design of LED display screen controlled by 8031 ??microcontroller. When the topic report and the proposal report were finalized, I immediately started collecting information. At that time, I was a little confused in the face of the vast sea of ??books and didn't know where to start. I told my supervisor about this difficulty, and under his careful guidance, I finally gained a grasp of my current work direction and methods.

In the process of collecting information, I carefully prepared a notebook.

I collect information in the school library and the university library, and also search for various related information on the Internet. I write down all these valuable information in my notebook, and try to make my information complete, accurate, and large in quantity, which is beneficial to the writing of the paper. . Then I carefully sorted and classified the collected information and brought it to the instructor for communication in a timely manner.

At the beginning of April, I had finished searching for the information, and I started writing the paper. When I encounter difficulties in the writing process, I contact my tutor promptly, communicate with my classmates, and ask professional teachers for advice. With everyone's help, the difficulties were solved one by one, and the paper slowly took shape.

At the end of April, the text description of the paper has been completed. In May, we started to draw relevant graphics and design the circuit. In order to draw circuit diagrams, charts, etc. that I am satisfied with, I carefully studied Excel's drawing technology. In the early stages of circuit design, I had no design experience and felt that I had no idea where to start. I had many design ideas but didn’t know which one to choose. After the guidance of my instructor, I gradually got a clue of the design. By reviewing the information, I gradually established the system plan. The design of the row and column drive circuits of the LED display screen in the plan is a relatively troublesome issue. After repeated deliberation and comparison, it was finally decided to use the 74LS154 decoder for the row drive circuit and the 74HC595 integrated circuit for the column drive circuit.

When I finally completed all the typing, drawing, typesetting, and proofreading tasks, I was very tired, but at the same time, I felt sweet in my heart when I looked at the graduation project manuscript on the computer screen. It's all worth it. The production process of this graduation thesis was a process of re-learning and improvement for me. In my thesis, I made full use of the knowledge I learned during college.

I will never forget these unforgettable months. The production of my graduation thesis gave me unforgettable memories. During the days when I was wandering around in the sea of ??books looking for information, facing the listing of countless books, the most unforgettable thing was the excitement and excitement every time I found the information; when I designed the circuit diagrams by hand, the most memorable thing was the realization of each small idea. That happy mood; I worked on my thesis until late at night, but looking at the words typed by my own hands, my heart was filled with only joy and no fatigue. This journey seems to be full of thorns, but in fact it contains endless treasures. From the collection of materials, I have mastered a lot of knowledge about microcontrollers and LED displays, which has allowed me to consolidate and improve the knowledge I have learned, and also given me an understanding of the latest development technologies of today's microcontrollers and LED displays. . Throughout the process, I learned new knowledge and gained insights. In the days to come, I will continue to enrich myself and strive to make a difference in the field I study.

Being down-to-earth, serious and rigorous, and seeking truth from facts, as well as the spirit of not being afraid of difficulties, perseverance, and hard-working spirit are my biggest gains from this design. I think this is a training of will, an improvement of my actual ability, and will be of great help to my future study and work.

In this graduation project, our relationship with classmates has also been further improved. The classmates help each other, discuss what we don’t understand together, and listen to different opinions to better understand us. Knowledge, so I am very grateful to my classmates who helped me.

I would also like to express my gratitude to my mentors and professional teachers. Your careful guidance and care enabled me to successfully complete my graduation thesis. The hard work and hard work of my teachers have been put into my studies and thesis research work. I was deeply inspired by the teacher’s rigorous academic attitude, profound knowledge, and selfless dedication. From my respected mentor, I not only learned solid and broad professional knowledge, but also learned the principles of life. I would like to express my most heartfelt thanks and deep respect to my mentor. Graduation Thesis Work Summary Part 4

Graduation thesis is an important part of the talent training plan of colleges and universities, an important practical teaching link in the undergraduate teaching process, and a comprehensive test of the quality of talent training. This year, I was responsible for the graduation thesis guidance of five graduates, including Yu Ying, Yang Tao, Yang Ming, Zhang Hongwei, and Mu Yongqiang. I reviewed the papers of eight students including Li Fang. Under the correct guidance of the department director, I With the help of teachers and the joint efforts of my classmates, I combined my characteristics of applied psychology, took some targeted measures in selecting the topic, and successfully completed my graduation thesis. While achieving excellent results, we also accumulated valuable experience. Now I will report the specific situation of my graduation thesis guidance work as follows.

1. Work Overview

Among the five students I guided, they made breakthroughs in topic selection compared with previous years. The topics they chose were basically related to the internship work they were engaged in. And closely combine the characteristics of applied psychology. After the topic selection was determined, the proposal report was completed in March 20xx. Yu Ying participated in the Xinguang Big Cup social practice activity in the summer vacation of 20xx and conducted a more detailed investigation on the living conditions of left-behind children. I was her instructor at the time. The paper written this time is carefully processed based on investigation and research, and is also a participant in a provincial project I applied for; four classmates, Yang Tao, Yang Ming, Zhang Hongwei, and Mu Yongqiang, are interning in the company. In the process, they began to conceive of the topic selection of the paper, the selection and preparation of the scale, and at the same time collected a lot of information, which laid a certain foundation for their paper writing work.

Except for Mu Yongqiang's paper, which was slightly worse, the other four students all completed their papers very well. During the process of writing their thesis, they were humble and constantly communicated with me to continuously improve their thesis. Most of them revised it four or five times. Especially Yang Ming, when he sent me a finished manuscript that he thought was excellent, my first feeling was that the results and analysis part were too messy and cumbersome, and I had no clue, but I didn’t know how to revise it. After thinking for a whole night, I finally gave him detailed revision suggestions. After repeated revisions, the quality of the paper was greatly improved.

I think that the graduation thesis of the five students I supervised and the papers of eight students including Li Fang that I reviewed basically met the undergraduate teaching requirements, consolidated the students’ theoretical knowledge and professional knowledge, and improved Improve students’ writing level and standards. In the process of guidance, I was indeed serious and responsible, guiding students to collect relevant research materials and providing relevant reference materials; guiding students to conduct scientific research from a methodological perspective, and answering problems encountered by students in the writing of graduation thesis (design); During the writing process, they were often given evaluative guidance, including strict control of the postscript and acknowledgments. Therefore, the paper writing process and the standardization of the paper itself have also been significantly improved, and serious plagiarism has been basically eliminated.

The overall level of graduation thesis (design) writing of these thirteen undergraduate students has reached excellent level, which is reflected in the fact that the topic selection has certain theoretical and application value, and they can apply the knowledge learned in this major to the problems encountered in scientific research. Analyze the problems encountered and show a high level of literature retrieval and foreign language writing. In the implementation of the thesis (design), the students showed certain scientific research quality and creativity. During the thesis (design) writing process, most students' language and writing skills were accurate, and the academic level of the thesis (design) met the requirements of a bachelor's degree. During the thesis writing process, some students' writing language was not standardized enough. After revision, they can basically meet the requirements.

2. Existing problems

From the eight students I reviewed, I found the following problems:

(1) Frequently changing topic selections. Due to the long period of graduation thesis work and the unpredictability, during this thesis work, some students changed the topics in the middle. Due to certain time constraints, it has a certain impact on the quality of the thesis (design).

(2) The scope of topic selection is too narrow. In terms of the scope of thesis (design) topics, the eight students I reviewed all chose their thesis topics from various aspects of research on college students. More than 80% of the samples were from Datong University, and some students were from universities outside the province.

(3) Sampling is not representative. Most of the students sampled only included students majoring in arts and sciences. Datong University is a comprehensive university, covering not only arts, sciences, and arts, but also agriculture, medicine, and engineering.

(4) The definition of the concept is unclear. Some students were unable to objectively define the concepts proposed in the paper, so the sampling was not representative. For example, "A Study on the Influence of Professional Values ??on the Employment Pressure of College Graduates" written by Shang Yingxia. She did not know what a college graduate was, so her sampling had serious problems, and it was revised after corrections.

3. Some thoughts on the graduation thesis work of our department

This graduation thesis reflects that students in our department have acquired certain scientific research and practical abilities through four years of undergraduate study. , writing ability and thinking ability, they have formed their own independent opinions on many issues. Most students have shown strong interest and enthusiasm in scientific research. However, there are also some shortcomings, mainly reflected in the relatively narrow range of knowledge, insufficient openness of ideas, insufficient understanding of how to write papers, lack of ability to collect, organize, and analyze information and materials, and a small number of students have a perfunctory attitude. Due to limited conditions, there are too many research topics for college students; some papers are not deep enough and not innovative enough; a small number of teachers do not review papers seriously enough, their comments are too simple, and the distinction between grades is not large, etc.

In response to the above situations, our department should pay attention to the following points in future graduation thesis work:

First of all, we must pay attention to cultivating students' scientific research awareness and writing scientific research in daily teaching. Thesis ability, organize teachers with scientific research strength and experience to carry out teaching activities for writing scientific research papers among students, actively cultivate a good academic atmosphere, and lay a solid foundation for graduation thesis.

Secondly, students’ graduation thesis should be more integrated with teachers’ scientific research projects, and graduation thesis work should be carried out in advance and reasonably arranged. Strengthen the spirit of academic cooperation, make the guidance of instructors more professional, students have a clearer sense of direction in scientific research, and further improve the quality of graduation thesis.

Third, it is necessary to improve students’ experimental skills, their ability to use computers (including requesting information, computer graphics, data processing, multimedia software applications, etc.), as well as their ability to obtain and independently analyze data and information. , learn to transform existing information into your own opinions and make practical expressions.

Fourth, further strengthen teachers’ sense of responsibility and strengthen students’ consciousness in engaging in thesis work. Further strengthen the review of paper topic selection and process management. Further compress the review topic selection to ensure the quality and standardization of paper writing; allow in-depth teaching research or theoretical research topic selection.

Management must be strengthened throughout the entire process, including the selection of instructors, student topic selection, graduation thesis (design) project approval, issuance of thesis assignment, submission and review of the proposal report, thesis implementation, thesis writing, defense, and revision, etc. In particular, the role of the instructor must be played, and the role of the instructor must be played.

Fifth, arrange time reasonably. It is best not to revise and defend the graduation thesis on the eve of the student's graduation. The instructor cannot revise what the student hastily produced in a short period of time. Graduation Thesis Work Summary Part 5

In nearly two months, we have basically completed the graduation project. In the process of programming, we learned a lot of knowledge, not only professional skills in programming development, but also exercised our perseverance and patience.

After a period of design and development, the book borrowing management system has been basically developed. The system functions basically meet the needs of borrowing management. Due to the tight time, the system still has some shortcomings, such as some interfaces. It's not beautiful enough, not user-friendly enough, and some operations are a bit cumbersome. These are things that can be improved in follow-up work. Because the research on the library was not precise enough, some issues were not taken into consideration, resulting in some implemented functions that were not comprehensive enough and needed further improvement. Some complex codes need further modifications to make them simpler and easier to understand.

In the process of developing the book lending management system, many problems occurred. For example, when debugging, the page appeared and the page could not be loaded. In the past, we only knew a single debugging method, that is, click the debug button. Where is the error message in the code? It is difficult to debug successfully. Later, after searching for information on the Internet and consulting teachers and classmates, I gradually understood how to debug the program. This requires adding breakpoints to the corresponding functions, pressing F10, and debugging in sections. With a little bit of debugging [Graduation Thesis Design Summary (***2 articles)], you can find out where the error occurs, and then continue to debug it.

When creating a database, the problem of the sequential creation of primary keys and foreign keys will arise. When the primary and foreign keys and relationships of tables and fields are created, and the database needs to be modified, the problem of primary and foreign keys will appear. question, then we need to consider the order of modifying the data table.

When creating the function of the login interface, I understood it wrong at first, which resulted in the login interface not having more practical functions. After a period of modification, I finally succeeded in modifying it. Programming is not the most difficult part. Modifying programs and debugging programs are often the most tedious and time-consuming. However, usually, only through patient debugging bit by bit can you discover the shortcomings of the system and realize the system's functions better and more comprehensively.

The life in college is very beautiful and worth remembering. Here, I found good teachers and friends, and learned knowledge that I couldn’t learn elsewhere. With the completion of the graduation project, graduation will follow, which means being separated from classmates and teachers, and there is really a lot of reluctance.

In the process of doing graduation projects, I often encounter problems. Some problems cannot be solved by myself. I am very distressed, so I ask my classmates and teachers for help. They will always be patient and help. When the teacher checks the program, he always patiently points out the obvious deficiencies in the program, so that I can understand how to correct it and improve the system's functions. When the teacher checked my graduation thesis, he wrote very careful comments, clearly stated the areas that needed to be revised, and provided careful guidance, which made it easier for me to correct the thesis. The teacher's gentle attitude and profound academic accomplishment have made me unforgettable for the rest of my life. I am really grateful to the teacher for his patient guidance and my classmates for their enthusiastic help.

Thanks to every teacher in the Computer Science Department. They take every class seriously and explain patiently. Thanks to my alma mater "Wuxi Vocational and Technical College", the beautiful campus, solemn teaching buildings, clean classrooms, beloved teachers, and dear classmates are the most precious and beautiful memories in my heart. No matter where I go in the future, I will still remember my alma mater, Wuxi Vocational and Technical College, the alma mater where I studied and lived.

Finally, I wish my alma mater to prosper and reach new heights!

Summary:

Date: ;