Office safety self-inspection report

With the improvement of personal quality, more and more situations need to use reports, so when writing reports, we should pay attention to covering the basic elements of reports. So what kind of report is effective? The following is my office safety self-inspection report, welcome to share.

Office safety self-inspection report 1 office: person in charge: investigation date:

Description:

1. Check whether the bottom plate and panel of the desk and chair are loose, whether the nails protrude, and whether people are hurt by clothes.

2. Check the hinges of doors, windows and bookcases for looseness, falling off and damage.

3. Check the glass for cracks and damage.

4. Check whether the multimedia equipment works normally and is damaged.

5. Check whether the power plug-in board and panel are loose or thrown on the ground.

6. Check the power cord for open circuit or short circuit at ordinary times.

7. Check whether the fluorescent lamp and ceiling fan work normally, whether the installation is firm and whether they fall off.

8. Check whether the curtains are aging and damaged.

(Please check it carefully by the person in charge of each office. Please tick the corresponding column if the project is normal, and please fill in the details if there are maintenance and rectification requirements. )

Office Safety Self-inspection Report 2 In order to effectively implement the Notice of the General Office of the State Council on Further Doing a Good Job in Fire Control and Resolutely Curbing Serious Fire Accidents and the Notice of the General Office of the Municipal Government on Doing a Good Job in Fire Control and Safety in Production, and the spirit of the emergency meeting in the whole region, the Office of the District Political Consultative Conference took active actions to carry out a fire safety inspection, and the overall situation was good. The relevant information is hereby notified as follows:

A, fire safety self-inspection measures

1. The office of the District Political Consultative Conference held a meeting of all the staff of the organs on1October 20 165438, and put forward three requirements: paying attention to ideas, carefully investigating and implementing the responsibility system for safety work. According to the division of labor, the safety inspection of office space is led by the director in charge and implemented by each section chief; The external environmental safety inspection of public facilities is led by the competent director and implemented by the administrative section chief.

2. Organize the fire safety education for the personnel on duty in the canteen and the doorman, the leasing business unit, and the carport maintenance related personnel to ensure the implementation of various rules and regulations, eliminate potential safety hazards, and ensure that the supervision force is in place.

3. Quickly conduct a serious and comprehensive safety inspection and investigation on the wire lines, fire exits, fire-fighting facilities, kitchens, computer rooms, guard rooms, carports and other places in the government compound, especially the key parts such as fire-fighting facilities and wires, as well as the fire safety responsibility system and management system.

Second, the overall situation of self-examination

After inspection, the fire safety status of CPPCC organs in the whole region is generally good. First, ideological attention, all departments attach great importance to fire control and safety production, and currently put fire safety work in the first place. The second is to standardize the system, strictly implement the organ safety responsibility system, and do a good job in strengthening daily safety inspection and night duty. Third, it has been technically realized. All fire extinguishers in the unit have been replaced, and fire hydrants and other equipment have been inspected to ensure the normal operation of fire fighting equipment.

Third, the next step

The catastrophic fire accident "1 1. 15" sounded the alarm for us. The Office of the District Political Consultative Conference proposed that it is necessary to carry out self-inspection on fire safety of government organs, draw profound lessons, draw inferences from others, take effective measures, resolutely put an end to hidden dangers, and prevent and contain serious fire accidents. First, do a good job in the aftermath of the "1 1. 15" fire accident. At the same time, in accordance with the spirit of the notice of the general office of the State Council and the general office of the municipal government, based on the present and with an eye to the future, strengthen the awareness of safety prevention, always keep a clear head, always tighten the string of safety, and never slack off and be careless. Second, in the spirit of being highly responsible to the people, we should earnestly do a good job in fire control and safety production. Extensively carry out fire prevention publicity, education and training, strictly implement the fire safety responsibility system, and further improve the fire safety production work of CPPCC organs. Third, it is necessary to continue to thoroughly investigate the weak links in the fire control work of the unit, make rapid rectification, and ensure that there are no loopholes in fire control safety, and all fire control safety systems and measures are put in place.

In view of the special situation that fires are prone to occur frequently in winter, the office of the District Political Consultative Conference plans to organize another fire safety training and education exercise in the next step to do a good job in fire safety to ensure people's life safety and social harmony and stability.

Office safety self-inspection report 3 According to the notification requirements of the Work Plan for Safety Inspection of Tangshan Port Economic Development Zone in Hebei Province and the unified arrangement of the leading group for safety production of the water department, in order to further strengthen the management of safety production, raise the awareness of safety production of the department personnel and ensure the stability of the office safety production situation during the Spring Festival and the "two sessions", the office organized personnel to carry out comprehensive and in-depth safety production self-inspection work within the jurisdiction from 20xx65438+10.5.

1. Hold a safety production meeting. Following the organization of a regular meeting of the whole department on production safety on Monday, and after learning the spirit of the work plan document of the Development Zone Management Committee on this major inspection of production safety, we also organized a conversation with the staff of the whole department, asking everyone to perform their respective duties and conduct strict self-examination on their own work to prevent all kinds of safety accidents. At the same time, organize personnel to check the doors, windows, locks, fire-fighting equipment and electrical appliances of dormitory and warehouse one by one, and rectify them in time when problems are found. And remind department employees to pay attention to personal safety when participating in public activities on holidays.

2. Improve the safety production materials. We have carefully inspected and improved our company's safety production organization, safety production hidden danger investigation, safety production monthly report, safety production meeting minutes, safety production training records, account of key facilities and equipment, special personnel training and operation certificates. , to ensure that all safety information is detailed and accurate. And handled the qualification certificate of crane driving operation for two crane drivers.

3. Strengthen vehicle management. In view of the characteristics of more entertainment, more cars and bad weather during the Spring Festival, a meeting of all drivers was held, asking everyone to strictly abide by the traffic rules, carry out regular vehicle maintenance, do not drive sick cars, do not drive angry cars, and prohibit speeding, drunk driving and fatigue driving to ensure driving safety.

4. Strengthen canteen management. Further strengthen the management of canteens, designate special personnel to be responsible for food procurement during the Spring Festival and the "two sessions" to effectively avoid food poisoning accidents. At the same time, in view of the safety hazard that the liquefied gas tank is too close to the stove, it is suggested to build an independent liquefied gas tank house on the north side of the canteen stove operation room to separate the liquefied gas tank from the stove operation to prevent accidents.

5. Do a good job on duty during the Spring Festival and the "two sessions". Further strengthen the discipline of duty, strengthen the work of duty, and conscientiously implement the 24-hour duty system and the leadership shift system. In view of the characteristics of few people during the Spring Festival, it is required to communicate smoothly, give and understand information well, prevent fire, theft and destruction, and be ready to deal with various emergencies at any time.

Through this self-inspection of safety production, the hidden dangers of safety production were further investigated, the awareness of safety production of department employees was improved, which laid a solid foundation for the continuous and stable situation of safety production in the office during the Spring Festival and the "two sessions" and was conducive to the orderly development of safety production in the office throughout the year.

Office safety self-inspection report On September 26th, our school held a meeting on teachers' safety, and deeply realized that school safety involves thousands of families. In order to effectively strengthen the safety work in our school and ensure the safety of teachers and students, it is foolproof. According to the spirit of the notice from the higher authorities on campus safety investigation and management, our school has carried out a careful and detailed investigation item by item in strict accordance with the requirements of the documents of the education authorities at all levels. The investigation is hereby notified as follows:

First, attach great importance to it, organize it carefully and implement it carefully.

Xu teacher, director of my grade, and Teacher Fan, deputy director of my grade, conducted a safety inspection on the office and its surrounding environment and student dormitory on 27th. First, in my grade, the alarm of safety work has been ringing, and I have been working tirelessly. Second, the investigation is comprehensive and meticulous, leaving no dead ends and no details.

Second, the basic situation of office safety work

1. The internal system of the office is perfect. At the beginning and end of each semester and major holidays, students of all grades should be given special safety education, and regular inspection and education should be conducted to prevent accidents and strive to create a good educational environment.

2. Check the safety of sleeping at night. Pay attention to students going to bed on time at night, and eliminate or report unsafe factors in time.

Third, the level of security risks investigation

Carefully check the safety of all parts of the grade. The teacher led the student party member to carefully check the dormitory facilities, especially the anti-theft and fire prevention facilities in key parts such as dormitory doors and windows, classroom doors and windows, and dormitory. The investigation and management of potential safety hazards are carried out at different levels, and the relevant information is as follows:

(1) Fire fighting conditions. Check the fire fighting facilities and fire extinguishers in the dormitory.

(2) the safety level of important facilities and places. The electrical wiring of the student dormitory was checked, and the wiring was complete without damage and aging.

Fourth, strengthen rectification and organize implementation. In view of the above situation, we have done a lot of work.

1. Raise awareness and strengthen the leadership and management of safety education. In order to further strengthen students' daily safety management, firmly establish the idea of "safety first" and earnestly implement the responsibility system for safety work, teachers and students in my grade seriously organize the whole school to learn the relevant safety education documents from superiors and learn lessons from safety accidents in various places.

2. Strictly implement the safety responsibility system. In the grade, the system of safety inspection and the system of students' duty on holidays in party member were established.

In short, the implementation of safety work is not phased, but a long-term work. My grade should take this special action to investigate and manage potential safety hazards as an opportunity to further improve various rules and regulations of safety work, deepen management, strive to put an end to unsafe accidents on campus, and create a safe and harmonious working, learning and living environment for teachers and students.

Office Safety Self-inspection Report 5 According to the requirements of the Company's Notice on Carrying out Safety Inspection (Hang [20xx] No.32), implement safety responsibilities, strengthen preventive measures, earnestly do a good job in department safety production, and effectively prevent and resolutely curb accidents. The office safety production work has been self-examined, and the relevant information is hereby notified as follows:

First, the implementation of the safety system and responsibility.

The office strictly implements the company's safety production system, vigorously carries out safety production publicity and education activities according to the company's requirements, adheres to the concept that safety production is more important than Mount Tai and safety production is always unremitting, conscientiously implements the policy of safety first, prevention first and comprehensive management, and strengthens safety awareness to nip in the bud. All the staff in the office have a strong sense of safety in production, and conscientiously implement the idea that everyone is responsible for safety in production, which provides a strong guarantee for the implementation of various measures for safety in production.

Second, the self-examination situation. The office conducted a safety inspection on May 8-9. The main information is as follows:

1. Inside the office: post a no smoking sign, and no open flames. It is stipulated that after work, computers and supporting equipment should be turned off consciously, doors and windows should be checked, and personal data should be properly kept. Basically, fire control and safety measures have been put in place.

2. Archives: install security window and security door, post signs such as no smoking, and no naked flame. (1) The external fire extinguishers shall be placed neatly, and the staff shall check the doors and windows before coming off work.

3. Confidential room: security door, security window, electronic monitoring equipment and illegal entry alarm device are installed, which are in normal operation and equipped with password filing cabinet. Smoking and naked flame are strictly prohibited, and safety precautions are in place.

4. Computer room: install security doors and security window, equipped with professional cabinets, independent of the official documents of the group company and the government. Turn off the computer facilities after work and check the circuit safety regularly. Security work is basically in place to ensure the relative security of official document transmission.

5. Copy room: put the equipment and paper in order, so that smoking and naked flame are strictly prohibited, and close the doors and windows of the copy equipment and copy room before work.

Third, the main problems.

1. The locks of the computer room and office are loose.

2. Equipped with fire extinguishers in the computer room and archives room.

Fourth, the rectification measures

1. Replace the locks in the computer room and office.

2. Buy fire extinguishers and put them in the computer room and archives room.

2. It is suggested to install monitoring facilities in the archives.

Office safety self-inspection report 6 Safety self-inspection report has always regarded safety as one of the concerns and attention points in daily work, and it is also the primary task of all work. According to the relevant requirements of the letter of responsibility for safety work signed with the headquarters at the beginning of the year, we re-implemented the leading group for safety work, carefully deployed the fire control work, defined the work responsibilities, and re-studied the fire control safety system in combination with the personnel situation. At the same time, we set up a "fire hazard investigation response team" with the safety leading group as the backbone and the main leaders, which provided institutional and organizational guarantee for fire safety work. The written report of safety self-inspection of our department is as follows:

One is to organize learning and raise awareness.

Organized and held a safety work meeting for all employees. At the meeting, we first conveyed the fire fighting spirit of the headquarters, and combined with the actual situation of our department, talked about the problems that should be paid attention to in the current safety work, and put forward strict safety work requirements, requiring everyone to fully understand the difficulties and ensure that the safety work is deeply rooted in the hearts of the people, and do their duty and never relax. In the process of inspection, we adhere to the principle of treating both the symptoms and the root causes. On the basis of general survey, rectification, and palliative measures, we should highlight the root causes, make full use of various effective carriers, and increase the publicity and education of fire safety, so as to raise the awareness of fire safety of employees to a new height.

Two, establish and improve the safety responsibility system and rules and regulations.

The safety working group is headed by any leader and is responsible for the overall work; The deputy team leader is responsible for the safety work on the fourth floor and the fire safety work on the second and third floors. Members include other academics.

In addition, weekly 1 departmental meetings are held, and safety work meetings of the on-duty and on-duty leaders are held. The first point of work is the safety work of the department, so that all employees can clearly understand the working principle of "quality is important, but the safety of teachers and students comes first", so as to keep the alarm bell ringing and make unremitting efforts.

Third, timely investigation and timely prevention.

According to the requirements of the Implementation Plan for Fire Inspection and Rectification in Baoan Branch, we focused on the following:

1, facilities:

Focus on investigating whether our fire-fighting facilities and indoor fire hydrants, fire extinguishers, emergency lighting, evacuation signs and other fire-fighting facilities and equipment are missing, damaged or out of service, as well as the installation and use of counterfeit and shoddy fire-fighting products.

2. Architecture:

Check whether the safety exits, evacuation passages and site settings of the office premises meet the national technical standards for building fire protection.

3. At the regional level:

Mainly investigate whether there are blocked or insufficient safety exits and evacuation passages, and lack of fire water sources.

Fourth, find problems and pay close attention to rectification.

During the inspection, focus on preventing and containing fires, carefully find problems and hidden dangers, and pay close attention to rectification.

1. Prepare and improve fire fighting equipment.

2, urge everyone to conduct self-inspection, the implementation of inspection measures, the implementation of inspectors, the implementation of the inspection period. According to the requirements of "Safety Work Responsibility Letter", various fire safety systems and operating procedures for ensuring fire safety have been established and improved, and various management has embarked on a standardized road.

3. The X and the office on the fourth floor are specially decorated to meet the requirements of fire control.

4. Organize all employees to conduct a fire safety drill, so that each employee has the basic knowledge of fire prevention and disposal.

Through the inspection, the fire safety awareness of the whole division was obviously improved, the safety responsibility was further implemented, and the safety hidden dangers were further eliminated. In the future work, we should take this inspection as an opportunity to establish and improve a more perfect long-term fire safety mechanism, carefully analyze the weak links in the work, find out the omissions in the work, and continue to carry out in-depth fire hazard investigation, so that the fire safety work of Baoan Branch can reach a new level.

7 anding district safety supervision bureau office safety inspection report:

According to the requirements of xxx Power Supply Company's Investigation Report on Power Supply Safety Risks of Important Customers (No.20xx [20xx]20), combined with the actual situation of power consumption in our hospital, on February 28th, 20xx, under the guidance of the technicians of Neiguan Power Supply Company, the leading group for safety production in our hospital conducted a comprehensive inspection on the safety problems of power consumption in our hospital, and comprehensively rectified the existing problems. The specific report is as follows: 1. In order to deal with the sudden power outage accident in our hospital, quickly and orderly organize the restoration of power supply, ensure the safety of patients, reduce property losses, ensure the smooth use of electricity in the hospital, and promote the institutionalization and standardization of accident emergency work, according to relevant national laws and regulations, combined with the actual situation of our hospital, the Emergency Plan for xxx Power outage accident was formulated and sent to the official power supply office for filing. Set up an emergency leading group for power failure accidents, with clear job responsibilities and clear division of labor, and the responsibility lies with people. The hospital has formulated the Safety Management System for Power Transformation and Distribution Rooms, and implemented it in strict accordance with the system.

Second, the hospital installed its own power supply, which can meet the emergency power demand after power failure. Signed the Management Agreement of Self-owned Power Supply with Neiguan Power Supply Company of anding district Power Supply Company, and was approved by anding district Power Supply Company, and issued the Use License of Self-owned Power Supply.

Three, electrician operation certificate has been submitted to the power supply company.

Arrange unified training and handling.

The fourth is to sum up experience to ensure the full implementation of electricity safety. Through this rectification, the hospital's electricity safety work has reached a new level. In the future work, we will humbly accept the supervision of higher authorities, ensure the safety of hospital electricity use, and better provide convenience for local people to seek medical treatment.

201March 5, 2

Keywords: rectification report on potential safety hazards of electricity consumption

Cc: xxx Power Supply Company and Neiguan Power Supply Office

The Second People's Hospital of Xxx issued Chapter III: Electricity Safety Inspection Report on March 5th, 20xx.

Guotun town shaonan primary school

Electric power safety inspection report

In order to further strengthen the safety of school electricity consumption and ensure the safety of summer electricity consumption, according to the school safety work plan, the safety inspection system of Shaonan primary school was implemented. On July 1 day, the safety work leading group of our school, together with the responsible persons of each responsible area and electricians and other relevant members, conducted a comprehensive inspection of the hardware facilities such as the school's wire circuits and electrical equipment, and conducted a comprehensive inspection of the software construction such as the management system and emergency plan. The self-inspection is now reported as follows:

First, the system construction:

The school has formulated and improved the electricity safety and safety work plan.

Inspection system, specific implementation methods of school safety work, school safety division responsibility system, accident reporting and handling procedures, implementation plan of education month with the theme of "caring for life and safe development", safety agreement for primary and secondary school students and various emergency plans.

Second, the organization construction:

A leading group for safety work has been set up, with a clear division of labor and responsibilities assigned to people. The principal is the first person in charge of school safety, and has signed a letter of responsibility for safety objectives with all relevant personnel.

Third, the current situation of electricity consumption:

1, the school subscriber line adopts three-phase wiring, aluminum sheath line, wire diameter1.5cm2, and is connected to the 20,000 kw transformer in Nantai District. The meter consists of three 20(60)a single-phase electronic meters, 60a AC circuit breaker and 30a fuse of 60a three-phase switch.

2. The power distribution room is equipped with modular standard switchboard. Voltmeter, ammeter, power meter and leakage protector run well. The distribution output and cable layout are reasonable, and each power consumption place is controlled separately, which is convenient for maintenance and handling unexpected accidents.

3. All indoor wires can ensure safe bearing capacity without aging damage;

4. High-power electrical appliances shall be installed reliably and grounded well;

5, indoor high and low voltage line wiring is reasonable, there is no potential safety hazard. Fourth, the existing problems:

1. Because the power of village-level transformers is too small and the load capacity is obviously insufficient, it seriously affects the reliable operation of school precision electronic equipment and high-power electrical appliances (air conditioners) during the peak period of power consumption;

2. Water plant equipment leaks electricity, resulting in self-excited clutter, which sometimes makes school wireless equipment, broadcasting, radio stations, alarms, timers and other programs wrong.

Verb (abbreviation of verb) rectification measures:

The school has joined forces with the village committee, electrician and substation to apply for separate installation of transformers to ensure the stable operation of electrical equipment. Guotun town shaonan primary school safety work leading team

Team leader:

Power technician:

20xx July 1

Office safety self-inspection report 8 In order to ensure the fire safety and anti-theft safety of the office environment of our company, according to the arrangement of the company leaders, the head of the comprehensive office led the relevant personnel in the office to form a safety inspection team, and conducted a strict inspection on the fire safety and anti-theft work of the office building and the outdoor parking lot downstairs in the afternoon of 12. The inspection is now reported as follows:

I. General situation of safety inspection

The inspection team first inspected the doors and windows, power circuits and switches, fire safety passages in corridors, fire-fighting facilities, environmental sanitation, etc. of all floors in the office building. Then the outdoor parking lot, green belt and lighting facilities outside the building were inspected.

Through comprehensive investigation, the inspection team found that the inspection results were generally good and there were no major security risks.

Second, the existing problems

1. The doors leading to the balconies on both sides on the fifth floor were not locked, the doors of the conference room on the fourth floor and an aluminum window of the conference room could not be locked, and the door lock on the right side of the sliding door of the reading room was damaged, so outsiders could enter and exit at will, which was a potential safety hazard.

2. sundries are piled up in the reading room, which is messy and has fire safety hazards.

3. The whole building is only equipped with two dry powder fire extinguishers, and the shelf life of dry powder in the fire extinguishers is unknown; The fire hydrants on all floors are locked, but the key is missing, so it is impossible to check whether the fire hydrants can be used normally. There are fire safety hazards.

4. Some offices on the second floor don't lock the door after work, which is a potential safety hazard.

Third, the rectification measures and suggestions

1. Please ask a professional locksmith to install new locks for the doors leading to the terrace on both sides of the fifth floor, and replace the doors and windows of the conference room on the fourth floor, the reading room door and the fire hydrants on each floor with new locks.

2. Classify the reading rooms according to the "6S" management standard to eliminate fire safety hazards.

3. Replace and purchase dry powder fire extinguishers as needed, and check the safety status of fire hydrants after replacing new locks on each floor.

4. Once again, all floors of the office must lock the doors and windows after work. In view of the security risks found in the inspection, the inspection team will contact relevant personnel to make timely rectification to ensure that there are no dead ends in fire safety, no loopholes in anti-theft safety, and create a stable and safe working and living environment for the employees of the company.

Office Safety Self-inspection Report 9 According to the requirements of the Company's Notice on Carrying out Safety Inspection, implement safety responsibilities, strengthen preventive measures, earnestly do a good job in safety production in the office area, and effectively prevent and resolutely curb accidents. Relevant measures are reported as follows:

First, the implementation of the safety system and responsibility.

The office strictly implements the company's safety production system, vigorously carries out safety production publicity and education activities according to the company's requirements, adheres to the concept of "safety production is more important than Mount Tai, and safety production is always unremitting", conscientiously implements the policy of "safety first, prevention first, comprehensive management", and strengthens safety awareness to nip in the bud. All the staff in the office have a strong sense of safety in production, and conscientiously implement the idea that everyone is responsible for safety in production, which provides a strong guarantee for the implementation of various measures for safety in production.

Second, carry out self-inspection of office areas.

From August 26th to 29th, the Office conducted a self-inspection on the work of production safety. The main inspections are as follows:

1. Inside the office: post a no smoking sign, and no open flames. It is stipulated that after work, computers and supporting equipment should be turned off consciously, doors and windows should be checked, and personal data should be properly kept. Basically, fire control and safety measures have been put in place.

2. Finance office: check the security window and security door as required, post signs such as No Smoking, no naked fire, place external fire extinguishers, and check the doors and windows before going to work.

3.GPS monitoring room: electronic monitoring equipment is running normally and equipped with computer password. Smoking and naked flame are strictly prohibited, and safety precautions are in place.

4. Kitchen: After lunch, close the supporting facilities of the cooker, and regularly check the safety of the circuit and gas path. Safety precautions are basically in place to ensure safety.

5. Copy room: put the equipment and paper in order, so that smoking and naked flame are strictly prohibited, and close the doors and windows of the copy equipment and copy room before work.

Third, the main problems.

1. Complaining that the office door lock is loose.

2. The copy room and kitchen are equipped with fire extinguishers.

Fourth, rectification measures.

1. Replace the lock.

2. Buy and place fire extinguishers.

3. It is suggested to install monitoring facilities in the duty room.

Office safety self-inspection report 10 Combined with the actual safety situation in our town, a special safety inspection team composed of the Party and Government Office, the Comprehensive Management Office, the Food Safety Office and Xingye Property Company carried out safety inspection and rectification on 20xx65438+February 1- 12. The inspection is now reported as follows:

I. Work situation

In this special inspection of safety in production of town organs and units, the fire protection and safe electricity consumption of various departments were mainly inspected, and a special inspection and rectification were carried out for all departments.

Second, the inspection found that there were security risks.

From the special inspection, it is found that the following safety problems exist in various departments of our town:

1. The glass window of the office of the convenience service center is loose, which has a major safety hazard and may hurt people coming and going at any time. It needs to be investigated in time and properly solved.

2. There is no fire hydrant in the sixth meeting room on the second floor of the canteen, and there are many people gathered in the meeting room, which has great security risks.

3. The front gate building of the town hall is seriously sinking due to the drainage of the tap water pipe, so it is necessary to dismantle the drainage channel as soon as possible to prevent casualties.

4. There are no dry powder fire extinguishers on the first floor, the second floor and the third floor of the town office. The dry powder fire extinguishers on the fourth floor have failed, so it is necessary to buy new fire extinguishers and replace the failed ones.

5, organs and departments staff fire safety awareness is weak, do not understand, do not cooperate.

Pay attention to fire control knowledge, and strengthen the publicity and education of fire control safety knowledge for all government cadres and workers.

Three. Measures and suggestions

In view of the security risks found in the inspection, the inspection team put forward rectification opinions, requiring the departments with security risks to immediately carry out rectification and investigation of security risks, so as to provide guarantee for the normal and orderly development of various departments and units of the government, and now put forward the following suggestions:

1. Repair, reinforce and replace doors, windows, desks and chairs with potential safety hazards in various departments and convenience service centers as soon as possible.

2, strengthen the publicity and education of electricity management and fire safety knowledge in various departments. To equip and improve fire-fighting equipment, the competent department should carry out extensive publicity and education work on laws, regulations and basic common sense of fire control and safety production within the scope of its duties, further improve the safety awareness, fire safety knowledge and fire-fighting skills of all staff members, and form a harmonious situation of fire control safety, prevention and treatment by groups.

3, strengthen the supervision, inspection and guidance of cadres and workers in various departments and organs, and investigate and deal with the responsible departments and individuals who do not seriously perform their duties of fire control and safety production, and create a harmonious and stable working environment.