Will the camera break down if it is placed in an environment with too high temperature for a long time?

Maintaining the camera is a very important job. If properly maintained, a SLR camera can take at least 65438+ 10,000 photos. In normal working environment, cameras and lenses do not need to be cleaned too frequently, because they are likely to be damaged during the cleaning process, so it is best to clean them when necessary. However, be sure to check the maintenance of the camera regularly.

(1) You can clean the outside of the camera with a soft flannel. Open the baffle of storage bin and battery bin, and clean the dust with soft brush or balloon blowing. If necessary, scrub the metal parts of the camera with alcohol. You should be more careful to clean the lens. The lens should be cleaned only when it is very necessary. A little dust on the lens will not affect the picture quality. When cleaning, use a soft brush and blow a balloon to remove dust. Fingerprints do great harm to the pigment coating of lenses and should be removed as soon as possible. When not in use, it is best to cover the lens to reduce cleaning times.

(2) The camera cannot be directly exposed to high temperature. Don't forget that the camera is in a car burnt by the sun. If the camera must bask in the sun (for example, when you are on the beach), use colored sand-proof towels or shielding tools with tin foil to avoid the light. Don't use black tools, because black will only absorb light and make the situation worse. When indoors, don't put the camera in a heater or other hot or humid places. Keep the camera in your pocket to keep the proper temperature and bring more batteries, because the camera may stop working at low temperature, which is like preheating the car in cold weather.

When the camera is brought from the cold zone to the warm zone, it often appears "sweating like a pig", so it is necessary to wrap the camera in a newspaper or plastic bag, and then use the camera until the camera temperature rises to the indoor temperature. In addition to the "sweating" phenomenon, putting the camera from low temperature to high temperature will also cause some compression to the camera. Of course, it is invisible to the naked eye, but be careful not to let the temperature of the camera suddenly change.

(3) Protect the lens with a lens cover, put small equipment and accessories in the bag and hands, and separate them with certain soft objects to ensure that they will not collide with each other. Especially those easily damaged equipment, should be wrapped in a soft layer. When flying, the damage degree of metal detector is slightly worse than that of baggage detector. If necessary, manual inspection can be required to minimize X-ray damage.

(4) It rains continuously in spring and has long hot weather in summer in Xiamen, so it is very important to keep the camera. Keep away from dust and moisture. Camera bag or camera box is a very good storage tool. Take out the battery before storage, so as to avoid bulging or corrosion of the battery stored in the camera for a long time, which will cause great damage to the camera, which will be an irreparable wound.