The floor heating in my house is not hot, the heating is warm, and it will not be hot after a while. What should I do?

There are many reasons why the floor heating is not hot. Here are some common reasons.

The first kind, the first time to use it, when it has not been used for a long time. This situation is relatively simple. When it is not used for the first time and for a long time, it is because the water temperature is relatively low and the process of water heating is relatively slow. Just like we don't usually use floor heating, we suddenly feel very cold when we melt snow. When we use it again, the weather outside is already very cold, and usually it can't reach the ideal temperature for more than ten hours.

Solution: In this case, we just need to wait patiently for the water to be heated to the ideal temperature.

Second: insufficient pressure in the return pipe. Sometimes it's not the floor heating equipment at home, but the floor is too high, or the heating end of the community. In this case, the pressure of the pipeline is not high enough, which will lead to poor heating effect at home.

Solution: If you can't solve this situation yourself, you have to contact the residential property and heating company to solve it. When the other party is busy or can't solve it, you can also buy a circulating pump to improve the circulation of hot water.

The third type: construction problems. If there are construction problems, it is generally because of unreasonable layout and other problems, which lead to pipeline bending and poor water circulation.

Solution: Rearrangement, this is a big project, so friends who are going to install floor heating, it is best to find a formal company to serve themselves, and on-site supervision is the most convenient. When the construction is finished, it will be too late to find out that there is a problem with the pipeline laying.

Fourth: there is air in the pipeline. Sometimes, after using floor heating in winter, air and stains will be automatically generated because the water flow is not clean.

Solution: Just open the bleeder valve on the water separator for about an hour and wait until the hot water is released.