Why do resin tiles leak easily?

The reasons why resin tile is prone to water leakage are as follows: First, the quality problems in resin tile; Some inferior resin bricks will add a lot of calcium powder or stone powder, which will make the resin bricks very fragile and easy to crack, leading to water leakage. Second, improper installation; Resin tiles were not installed at an angle of 135 degrees. Third, there is no waterproof pad; If the waterproof pad leaks before laying the resin brick, it will leak easily when it is used later.

A, resin tile leakage repair method is as follows:

1. If the water leaks because there is no waterproof pad, just remove the leaking part by 2 to 3 centimeters and clean it up. Then water it with asphalt, and it won't leak when it dries.

2. If the roof leaks, first find the leaking place, usually from the roof to the bottom. Mainly depends on whether there are cracks in the roof, whether the waterproof layer is aging, whether there are bubbles in the waterproof coiled material, etc. If there is, it is necessary to repair the leaking place.

3. If there is a waterproof layer in the leaking place, it is necessary to remove the surrounding waterproofing and make it waterproof again. Pay attention to the waterproof junction as a strengthening layer when doing it.

Second, the purchase method of resin tile is as follows:

1, look at the appearance, resin tile uses polyurethane as the main raw material, supplemented by other accessories, and the surface is smooth. So you can pay attention to its luster when you buy it. Generally, the better the luster, the better the resin tiles without chromatic aberration.

2. In terms of weight, resin tile itself is relatively light, while some fake and shoddy products are heavier than ordinary resin tile.

It can be ignited by fire. Generally speaking, after resin tile is lit with a lighter, the flame will go out quickly. However, some resin ceramic tile products with poor quality will burn for a long time, and will be accompanied by unpleasant smell after burning.

3. The advantages of resin tile are as follows:

1. Generally, resin tile has a long service life, which can last about 50 years.

2. There are many colors in resin tile, such as bordeaux, clear gray, matte gray, dark green and sea blue, which have a very good decorative effect on resin tile. Secondly, the color of resin tiles will not fade with time.

3. resin tile has the thermal insulation performance of warm in winter and cool in summer. Secondly, resin tiles can also absorb noise and reduce noise in heavy rain or windy weather.

Resin tile has the ability to resist some corrosive chemicals such as acid and alkali.

Finally, the article concludes: The above is the whole content of why resin bricks are easy to leak and how to buy resin bricks, hoping to help everyone. Want to know more, please continue to pay attention to this site.