Traditional Culture Encyclopedia - Weather inquiry - What if the windows are not insulated in winter? What can I do to solve this problem?

What if the windows are not insulated in winter? What can I do to solve this problem?

As we all know, the winter weather is cold and the temperature is low, so many people's windows will be ventilated and not warm, which is a common phenomenon. The window is not warm and needs maintenance, so what if it is not warm in winter? Let's take a closer look!

Is there any way to solve the problem that windows are not insulated in winter? Due to the large temperature difference between indoor and outdoor, there is always a feeling of cold wind near the window, which is caused by normal climate change. Generally, it can be solved in the following ways:

To enhance the sealing performance of windows, we must first seal the windows well. If the temperature is low in winter, the sealing strip of the window will deform and harden, resulting in poor sealing performance of the window. You can test it by hand near the window gap. If you obviously feel cold air blowing into the room through the window sash gap, you can buy a better sealing strip instead. High and low temperature resistance is better and the material is softer.

In addition, the joint between the window and the wall, the joint between the window glass and the window frame, and the temperature change in winter will all lead to joint cracking. Choose a time period with fine weather and high temperature to re-glue and seal.

Enhance the thermal insulation of windows Some windows have poor thermal insulation due to quality problems or workmanship problems, and some strengthening measures can be taken in winter. Thermal insulation film can be installed on the window, which is mainly used to prevent wind and enhance the thermal insulation of the window.

Double-decked windows can also be used to enhance the thermal insulation performance of windows. Suitable for windows with poor heat insulation and sound insulation, and do not want to replace the original windows.

The other is to replace windows, which are usually operated in warm weather, such as summer. Generally, windows are replaced because of poor quality.

It is relatively simple to make a warm curtain for the window, and the sealing performance of chemical fiber material is better.

What if the windows don't keep warm in winter? It depends on what kind of window you are, whether it is open horizontally or pushed and pulled.

Because of the slide way, the sliding window is not very airtight, and the gap between the tracks will lead to heat loss, which is more obvious when the wind pressure is high. At most, it is to change the coat, but the effect is also average.

Casement window, see if it is broken aluminum or plastic steel window. Plastic-steel windows will be deformed after aging, and the sealing strip will become hard for a long time, and the sealing is not good. Replacing EPDM sealing strip or silicone rubber sealing strip may have certain effect. If the window has been deformed, the effect will not be very good, so it can only be done. After all, the pressure is not tight. The broken bridge aluminum window depends on the manufacturing process. Some small workshops are shoddy, with large gaps, uneven overall and air leakage. It is better to replace the sealing strip for the broken aluminum window.

If it's an ordinary aluminum alloy, cold bridges effect, it's impossible without a sealing strip.

Finally, check the sealing effect between the window and the wall. If the gap is not tight, it can be filled with styrofoam, and finally the sealant is tightened. Need to check both inside and outside.

Solution to the problem of warm windows in winter 1. If there is a big gap in the window, you can buy some sealant to fill the gap.

2. There is something wrong with the seal, and rubber strip is aging. Just get a new rubber strip. Then the styrofoam will age, soften and powder, and you can find someone to play it again.

You can hang thick curtains to keep out the wind and make the house feel warmer.

4. If the window is deformed due to material problems, you can only find the installation factory to sell it to you after sale.