Traditional Culture Encyclopedia - Weather inquiry - It is difficult to sew glue when the temperature is low in winter. Is there any good solution?

It is difficult to sew glue when the temperature is low in winter. Is there any good solution?

The coming of winter also means that the construction of seamless pipes is more difficult. Winter is the finishing period of decoration, and many people also want to finish the decoration before the Spring Festival. Although the weather is cold and the construction of beautiful seams is the peak season, is it really that easy to construct in winter?

As we all know, caulking agent is a chemical product, so it is quite sensitive to temperature. When the temperature is low in winter, the epoxy resin will become sticky, and when it is wet in the south, it will also affect the color of sealant.

So what should we pay attention to in winter construction?

1. The temperature of the sealant is too low. The minimum suitable temperature for sewing construction is 65438 05℃. When working below 5℃, the lower the temperature of the sewing agent product, the more sticky it will become, or even freeze. At this time, it is necessary to heat the material properly. Before construction, heat the product with 50-60℃ hot water for 5- 10 minutes.

2. The construction environment temperature. During construction in the United States, because the new house has no heating, electric heaters can be used to raise the temperature of the indoor construction environment. Close the doors and windows before construction to ensure the indoor temperature, which is also conducive to the curing of joint sealant and the eradication of residual materials.

3. Floor heating can make beautiful seams. Floor heating is mostly used in the north, which requires beautiful sewing. If you don't make a beautiful seam, the hot air generated by floor heating will come out of the gap, bringing out dust and breeding bacteria.

For a house with floor heating, a two-component flexible joint agent should be used, preferably for floor heating. A good toughness sewing agent will not fall off due to the increase of temperature. Therefore, when buying a sewing agent, we should not only look at the sales volume, but also choose a trustworthy brand.

4. Scraps are difficult to clean. If the construction environment temperature is too low in the construction process, it will lead to slow curing, but if the temperature is too high, it will accelerate curing, and it will be difficult to clean the residual materials after a long time.

Therefore, no matter what tiles are made in winter, waxing can't be omitted, so it is more convenient to clean up the remaining materials.