What can heat shrinkable sheets do?

Super cute three-dimensional hot shrink goldfish earrings, you can also have them.

Graphic course

Materials required: 0. 15mm heat shrinkable sheet, carbon powder (white, red, yellow and black), UV glue, 9-pin T-pin, diamond beads, ear hook, etc.

Tools needed: scissors, white Gou Xianbi, finger covers, carving pens, hot air guns, ultraviolet lamps, pill sticks, sharp-nosed clips, pliers, etc.

Drawing drawing

0 1

Draw the shapes of goldfish and fish tails on white paper. The size of my little goldfish is shown below for your reference.

Shape tracking

02

① Use white lead to trace the shape of small goldfish and fish tail on the heat shrinkable sheet.

(2) Cut out the drawn figure with scissors.

(3) Carve the lines of small goldfish and fishtail with a carving pen.

scuff

03

Hit the fishtail and golden fin.

Colour the little goldfish, its accessories and fish tail.

04

(1) before painting, use white toner as the base, and then use colored lead to color, and the fish scales will be thinner.

③ Coloring is completed. You can color the little goldfish according to the following color scheme.

Shrink goldfish and fish tails.

05

① Place the small goldfish on the sponge pad, slightly fix it with the arc-shaped mouth clip, and completely contract.

(At this time, the accessories such as fish belly and fins have shrunk, and I forgot to take pictures. )

(2) After complete thermal shrinkage, the fish belly with appropriate size is pressed into the basic shape. Then put on gloves and start to shrink slowly to shape the small goldfish (this step is complicated, you can watch the previous video tutorial on peach thermal shrinkage and do some simple three-dimensional modeling Kamijozu, and modeling must be patient).

(3) The thermal shrinkage of small goldfish is completed.

④ Glue the tripe and fins with UV and dry them under the lamp (if the tripe size is not suitable, it can be polished with sandpaper).

⑤ Fix with 9 stitches to shrink the fishtail.

Coat small goldfish and fish tails with UV glue and leaves.

06

▼ Apply UV glue to small goldfish.

① Apply UV glue to the goldfish and turn on the light for 1-2 minutes. I used a toughened seal coat, which dried quickly ~

(2) Stick some bubble beads with UV on the fish head (ps: I accidentally forgot one step, and the bubble beads were added when they were ready. It's best to stick bubble beads here ~)

▼ Apply UV glue to the fish tail.

① You can apply two more layers of UV glue. Dry one layer and then apply another layer, and press the lamp to dry 1-2 minutes.

(2) Select sequins and decorations that match the small goldfish, stick them on the fish's tail with UV, and dry them under the lamp for 1-2 minutes.

Tips:

You must be patient when making goldfish models. Most of the tutorials you see are prepared in a short time. Some of them are because some processes have been cut down, and some are because you are very skilled, or sometimes you are lucky enough to model successfully at one time.

The thermal shrinkage process of this issue of graphic tutorials and video tutorials has also been simplified. If you still can't shape goldfish after trying for a long time, you can first look at the three-dimensional thermal shrinkage modeling process of peaches, which is very detailed. You can start with simplicity and proficiency, and it's no problem to be a small goldfish ~

Make earrings

07

Choose the earrings you need and combine them with small goldfish and fishtail to make earrings ~

The materials I choose are T-shaped needles, diamond-shaped beads and ear hooks. Connect one by one ~

And the couple I made before, aren't they cute?

Friends who like it can try to make it. If you have any suggestions, please leave us a message. You can trust us privately if you need drawings.