What is the humidity suitable for maintenance of single-board guitar?

Single-board guitar is suitable for maintenance under the humidity of 40-60.

The single-board guitar is made of a whole piece of wood. Don't put the guitar in a damp place. Pay attention to the moistureproof guitar at ordinary times, and put it in a certain humidity space after use.

Extended data:

disadvantaged

Because wood has annual rings, the grain and composition of the whole board are different, and the coefficient of thermal expansion and cold contraction of wood is different when it is wet or dry, which is more susceptible to weather changes than plywood guitars.

Excessive moisture intrusion will make the guitar swell. Most commonly, the panel will begin to swell (or swell) and the surface of the panel will begin to distort. It is especially obvious on guitar models with missing horns. In this case, the backboard will also expand and distort. It can be proved from the depressions in the front and back of the backboard.

The higher the relative humidity, the more obvious the distortion. The longer you are exposed to high humidity, the paint will begin to deform. The paint on the panel will wrinkle slightly. There will be many small holes in the back side plate. When rosewood expands, the holes in the wood expand, so that the paint (not affected by moisture) falls into these holes.

The paint on the mahogany neck will also sink into the hole for this reason, as will the back side plate.

Baidu encyclopedia-single board guitar