Traditional Culture Encyclopedia - Hotel accommodation - Three emergency plans for water supply and power failure of the company

Three emergency plans for water supply and power failure of the company

Now the water and electricity cut-off is a big event, and the company will definitely make an emergency plan in advance to prevent this from happening! So how should I write it? The following is the company's emergency plan for water and power cuts that I compiled for you, for reference only. You are welcome to refer to it.

Company's Emergency Plan for Water and Power Shutdown 1

Predicting power failure:

1. After receiving the power outage notice, the service center should inform every household and merchant in advance of the power outage line, area, time, elevator use and safety precautions, and issue power outage notices at the main entrances and exits;

2. Inform the engineering department to do emergency work before power failure, such as closing the elevator and debugging the standby diesel generator.

Unexpected power failure:

1. In case of sudden power failure without receiving any notice, the engineering department shall immediately confirm whether it is an internal fault power failure or an external fault power failure. If it is an internal fault power failure, immediately send someone to find the reason and take measures to prevent the fault from expanding; If it is an external power outage, on the one hand, it is necessary to prevent accidents caused by sudden calls, on the other hand, it is necessary to call the Power Bureau to inquire about the power outage, know when to restore power supply, and inform the management department of the information.

2. The Order Maintenance Department will immediately send people to each floor to check the elevator operation together with the Engineering Department. If the elevator is trapped, it will be rescued immediately according to the emergency plan for the trapped elevator personnel.

3. The management department will immediately notify the important merchants in the community of the power outage. If the standby generator is enabled, it can be notified by the community broadcast. If the power outage lasts for a long time, it is necessary to issue a power outage notice at the main entrance and exit.

5. In case of sudden power failure, when the mall is open at night, the security department should assist the mall to maintain good order, guide the merchants to use emergency lighting, candles and other backup lighting to evacuate customers, pay attention to fire prevention and prevent fire, and assist the mall management department to do a good job in safety prevention.

6. When necessary, arrange employees to the main entrance and exit of the community and the elevator hall to maintain order. The order maintenance department should strengthen security measures to prevent people from creating chaos, fish in troubled waters and close the door when necessary.

7. Send people to guard the office and duty room, patiently receive inquiries from residents and merchants, do a good job of explanation and guidance, and prevent conflicts with residents and merchants.

8. The Engineering Department shall record in detail the time, causes, countermeasures and losses caused by the power failure accident.

9. Preventive measures for sudden power failure:

1) The engineering department shall regularly check the emergency lighting and emergency broadcasting system to ensure normal operation.

2) The management department should remind office residents and merchants to prepare some emergency lights or candles to prevent power failure.

3) The Order Maintenance Department and the Engineering Department shall be equipped with portable emergency lighting besides flashlights for patrol and maintenance, which shall be charged and maintained at any time and kept in good condition.

10, the power outage time is too long. If necessary, ask the relevant leaders of the management office whether to turn on the standby power supply system.

1 1. When confirming the duration of power outage, inform residents and merchants to pay attention to water storage to avoid the failure of normal water supply due to the paralysis of secondary water supply system.

12. In case of external power failure and abnormal power supply, it is necessary to stop all elevators in the community except the office building to prevent the elevators from closing, and arrange staff to stay in the running elevators until the power supply is normal.

Predicted moisture content:

1. After receiving the notice from the water supply company, the service center should broadcast the plan in the community and post the notice on the bulletin board of each corridor.

2. The notice of water cut-off must include: the reason for water cut-off, the estimated time of water cut-off and water supply, reminding residents and shops to do a good job of water storage, and paying attention to closing all faucets or main valves indoors.

3. If there is a living reservoir in the residential area, a secondary pressurization system can be adopted, and regular water supply can be flexibly adopted.

Unexpected moisture content:

After receiving a consultation call from residents or finding that water is cut off, immediately arrange an engineer to check the reason, whether it is equipment failure or no water in the water inlet pipeline. In case of equipment failure, immediately find out the reason, immediately deal with the cause of the failure, if it takes a long time to repair, immediately notify the service center, post a notice and broadcast it in the community. If there is no water in the water supply pipeline, you should immediately contact the water supply company to understand the situation and broadcast it in the community. If the water is cut off for a long time, a notice of water cut-off needs to be posted.

Emergency plan for water supply and power failure of the second company

In order to effectively protect the safety of teachers and students in the whole school, effectively deal with the sudden power failure accidents that may occur in the whole school, and prevent the occurrence of water and power failure accidents, according to the spirit of the relevant documents of the higher authorities, the emergency plan for water and power failure is formulated after the school's research and decision.

Safety leading group:

Team leader:

Deputy team leader:

Members: class teachers and logistics staff of each class.

First, the main responsibilities:

Timely understand the information of water and power outages, master the equipment configuration of the school to prevent sudden water and power outages, and put forward preventive countermeasures and measures according to the actual situation of the school, strengthen the safety education for teachers and students in the school, and improve their awareness and ability of protection.

Second, the work measures:

1. Strengthen the publicity of school safety education, make full use of bulletin boards, blackboard newspapers, campus broadcasts and other publicity positions, and educate and train the teachers and students of the whole school in the form of theme class meetings and radio stations, so that students will not panic when water and electricity are cut off.

2. Strengthen the maintenance and installation of facilities to prevent water and power outages. The school will invest money to install some related equipment according to the actual situation to prevent sudden water and power outages. For example, emergency lights and exit signs are set on the stairs of dormitory buildings and teaching buildings to ensure smooth stairs and firm guardrails. When water and electricity are cut off, the class teacher and classroom teacher will organize students to evacuate safely.

Three. Reports and responses:

1. If the water supply and power outage are notified in advance, all teachers and students shall be informed to make preparations before the water supply and power outage on the premise of getting in touch with the offices to explain the situation.

2. Temporary water and power cuts without prior notice:

(1) The manager on duty immediately reports the situation to the safety leading group for water and power cuts, and the leading group will arrange related work separately.

(2) The members of the leading group shall immediately notify the important functional departments by telephone, for example, inform the canteen to arrange meals and temporary lighting appliances, and inform the education department to arrange the head teacher and classroom teachers to maintain order in the aisles and stairs of each floor.

(3) The General Affairs Department is responsible for organizing water and electricity maintenance personnel to find out the causes of water and electricity outages, and timely contact and coordinate with the local water and electricity departments to troubleshoot as soon as possible.

3. Water supply and power failure during night self-study:

(1) The school personnel on duty should call the electrician and maintenance personnel on duty in time.

(2) After the water and electricity are cut off, the teachers on duty should immediately go to the designated floor to organize students to enter the classroom to maintain order and evacuate in an organized and planned way.

Company emergency plan for water and power failure 3

(1) Leading organization

Commander-in-Chief: Day shift. Night shift: cadres on duty

First, the deputy director refers to the composition and responsibilities of emergency rescue.

Deputy commander:

Team members:

< 2 > responsibility

1, Chief Commander: responsible for organizing and directing the emergency rescue of the whole plant.

2. Deputy Commander-in-Chief: responsible for assisting the commander-in-chief in the specific command of emergency rescue.

3. Team members: working under the unified command of the headquarters, the responsibilities of each section chief in accident emergency rescue are:

Steelmaking foreman: responsible for the on-site command of steelmaking section.

Continuous casting foreman: responsible for the on-site command of continuous casting section.

Mechanic foreman: assist the chief commander in charge of emergency repair. On-site command

Foreman of electrical maintenance: assist the general commander in charge of the on-site command of emergency repair work.

Peripheral foreman: assist the general commander in charge of the on-site command of emergency repair work.

Engineer: Responsible for the technical guidance of the emergency repair site.

Second, the emergency communication:

When dealing with accidents, all personnel involved in emergency rescue and emergency repair should keep communication open. If the signal is unstable or interrupted, they should immediately use the fixed telephone or mobile phone in the factory to get in touch with the chief commander in time and clearly state their position.

Third, the accident treatment plan:

1. When there is a power failure, the main controller of the water pump room should not panic, but should be calm. The south safety water tower can supply water for about 15 minutes, during which the water pump can be completely restarted after the main controller sends electricity.

2. Under normal circumstances, the diesel engine can start automatically after the power failure in the North District. The chief engineer of the water pump room only needs to press the clutch button on the operation panel of the control box, and then hold down the speed-up button until the speed displayed on the speedometer can no longer rise.

3. If the diesel engine can't start automatically, press the reset button first. If it still doesn't work, turn the transfer switch to the manual position. At this point, the diesel engine can be started as long as the finger presses the start button.

4. After the diesel pump is successfully started, the main control room of the water pump room shall immediately report the situation to the shift supervisor and notify the converter main control room and the continuous casting main control room.

5. After receiving the alarm call from the water pump room, the converter master control room should immediately stop smelting with guns, and immediately notify the shift supervisor, who will report to the superior.

6. After receiving the alarm call from the water pump room, the continuous casting master control room should pay close attention to the quantity of secondary cooling water and try to finish the molten steel in the ladle as much as possible.

7. After the diesel engine is started, the chief engineer of the water pump room can appropriately adjust the manual valve at the entrance to increase or decrease the water pressure, so as to achieve the safe water use required by the equipment.

Four. Preventive measures and assessment

1, the chief engineer of the water pump room should closely monitor the water level of the safety water tower in his usual work, and report to the shift supervisor immediately if there is any abnormality, so as to timely handle and eliminate hidden dangers.

2, safety water tower outlet pipe manual valve should be observed at any time, in case someone wrong operation.

3, each shift personnel to patrol the diesel engine operation box panel switch, indicator light. For example, the selector switch should be in the automatic position. Turn on the key switch of power supply. Whether the float indicator light is on, whether the alarm light is on, and reset it in time.