How to use smart locks for smart door locks

With the development of intelligent wave, intelligent and convenient home has become the mainstream, and the emergence of intelligent door locks is also the product of this mainstream. However, in the face of the emerging smart door lock, how should we use it and how to set it correctly? I'll tell you in detail.

First, how to set the smart door lock How to set the smart door lock-Administrator password

Operating steps: 1. Open the battery cover. 2. Press the setting key once to make a ticking sound. 3. Press the Start key (one digit after the number 3 on the keyboard), enter the password (3-8 digits), and then press the # key. The operation was successful when the ticking sounded.

How to set the intelligent door lock-door opening card, password, fingerprint lock and remote control setting.

Operating steps: 1. Open the battery cover. 2. Press the setting key once. 3. Press the Start key, enter the password (3-8 digits) and press the # key. 4. Press the Start key, enter the number (00-99) and press the # key. 5. Press the Start key, enter the door (3-8 digits), press the # key to finish, and the password is set successfully; Point your finger at the fingerprint window to read the fingerprint. After clicking, press the same finger again to read the fingerprint. The sound of the two readings is the same, indicating that the fingerprint input is successful; The card to be set is close to the sensing area, and the sensing card is set; Press any key on the remote control to set the remote control.

How to set the intelligent door lock-delete the door opening card, password, fingerprint and remote control.

1. Open the battery cover. 2. Press the setting key twice continuously. 3. Press the Start key, enter the administrator password, and then press the # key. 4. Press the Start key, enter the fingerprint, password and corresponding number of the remote controller to be deleted, and then press the # key. For example, delete a fingerprint, point your finger at the fingerprint window to read the fingerprint, put the card to be deleted near the sensing area, and press any key of the remote control.

How to set the smart door lock-delete all cards, fingerprints, remote controls and passwords.

1. Open the battery cover. 2. Press the set key three times in a row. 3. Press the Start key and enter the administrator password. 4. Finally press the # key.

How to set intelligent door lock-common unlocking methods

1. Password unlocking (with anti-leakage function, you can press any number before entering the correct password to prevent password leakage). Enter the set unlocking password and press the # key, and the door lock will give a prompt tone, indicating that the unlocking is successful.

2. Unlocking the inductive card: Put the authorized door card near the inductive area, and the door lock will give a prompt tone, indicating that the unlocking is successful.

3. Fingerprint unlocking: put the authorized fingerprint on the window and send out the prompt sound of unlocking success, indicating that the unlocking is successful.

4. Remote switch lock: press the remote unlock key and turn the handle down to unlock successfully; When the door is closed, press the remote control to close the lock, and lift the handle to successfully close the lock.

5. Indoor anti-lock braking: After the door is closed, all outdoor modes cannot be unlocked after indoor anti-lock braking.

6. Lock the door outdoors: After closing the door, press the * key to lock it, lift the handle and lock it successfully.

Second, the smart door lock description 1, how to install the new smart lock?

Whether you buy it online or offline in the flagship store, you can make an appointment for you and arrange for professionals to install it at home. Before that, you need to communicate with the customer service staff about the type and size of the door.

2. How to add or delete fingerprints or passwords?

Press the * key twice in a row, enter the management password, and then press the # key to end and enter the management mode. The initial management password is "12345678", and you can add/delete fingerprints, passwords, etc. According to the voice prompt.

3. How to replace the battery?

When the smart lock prompts that the battery is low in power and needs to be replaced, open the battery cover and replace the 4-cell 1.5V alkaline AA battery. The battery cover is located above the back panel of the door.

Note: If it is a K7 smart lock, put your thumb under the word "Push" and push it up with the inclined plane to open the back cover. K7' s battery cover is tight, so I suggest you try it several times.

4. What if the battery is completely dead?

Each set of Cadiz smart locks is equipped with an emergency power interface, which can be connected to an external power supply for emergency power supply when the battery is completely dead. (Some models are 9V power interface, and some models are Micro USB external power interface. )

5. Application download

Through the smart APP, some models can realize Bluetooth +APP unlocking and remote APP authorization unlocking.

6. How to unlock with Bluetooth?

① Turn on the Bluetooth function of the mobile phone.

② After opening Kaidishi Smart APP and registering, close to the smart lock, click "+"in the upper right corner to search for your smart lock and pair it.

③ With Bluetooth +APP, you can unlock the Bluetooth of your mobile phone at high speed, which is as vertical as silk!

7. How to use the remote APP to authorize unlocking?

As shown in the figure below, after entering the other party's account, you can set the right to use it once, many times or permanently.

8. How to restore the factory settings?

If you accidentally forget the management password, press the initialization key for more than 3 seconds when starting the machine, and you will hear a voice prompt: "Restoring, please wait a moment, the password is too simple, please modify the management password in time", indicating that the lock has been initialized successfully.

Everyone has read the commonly used instructions of smart locks. Do you also know the settings of smart door locks? There are many smart door locks on the market, and the setting methods may be slightly different. Then, in the face of specific products, it is still necessary to analyze them in detail. I hope everyone can quickly step into the intelligent age.