Comparison of Green Wood Ceiling

Advantages of ordinary wood

Natural wood is a common material with a wide range of uses, which can be seen everywhere in our daily life. This is inseparable from the advantages of solid wood, and its disadvantages are also obvious.

1. Machinability: it can be used for backing, nailing and planing, and it is convenient to process.

2. Good toughness and certain hardness: it can be bent and formed. And is hard to be damaged by external force.

3. Have a certain bearing capacity: for example, the beams of ancient buildings.

4. Low density and light weight.

5. Wood grain and color: Natural wood grain is irregular, which is a good natural pattern. Knots of solid wood are more difficult to imitate. Different tree species and different growing environments will produce different colors, such as mahogany, Huang Huali and oak.

6, high insulation, non-conductive under dry conditions.

Disadvantages of ordinary wood

1, poor waterproof and anti-corrosion ability: most of them are solid wood materials, and some wood materials have good anti-corrosion ability, such as wooden furniture left over from ancient times, which is still well preserved after hundreds of years of wind and rain. However, most of these materials (such as mahogany and Huang Huali) are precious tree species, which are expensive and cannot be widely used. Ordinary wood materials are not ideal even after treatment. Such as preservative wood. Usually it will start to rot after three years.

2, easy to deform, crack, mildew: especially when used outdoors, it is easy to happen in humid, exposed and other environments. 3, vulnerable to insects and ants: mainly termites.

4. flammable

5. It is very destructive to the forest.

Recycling of Green Wood Carving Materials

Green wood carving has the least damage to the earth, and products can be recycled in the process of obtaining raw materials, manufacturing, using or recycling products and processing raw materials. It is a kind of material beneficial to human health and a real environmental protection product.

The raw materials of GreenerWoodCeiling products are solid wood that cannot be reused or waste from recycled wood.

In the manufacturing process of green wood carving products, no harmful ingredients are added. Then there will be no pollution in the production process. The main reason why the common composite wood materials in the market can't be classified as green wood is that too many harmful components are added, especially the glue that plays an adhesive role.

To sum up, green wood has the advantages of natural solid wood, abandons the shortcomings of wood, and does not add harmful boards in the production and processing process.

Characteristics and advantages of green wood carving products

As the leader of the wooden ceiling industry, Lvlin Wood has developed a series of assembled wooden artistic ceilings according to the demand of domestic and foreign markets. Grille wood ceiling series; Strip wood art ceiling series; Arc wooden ceiling series; Trough wood art ceiling series; Square tube wood art ceiling series; Round tube wood ceiling series; Flat buckle wooden ceiling series; Hanging wood art ceiling series; In China, Guangzhou, Australia, Brazil, South Africa and other regions, a series of products such as sound-absorbing wooden art ceilings have been established. Its performance attributes are as follows:

(1) Environmental protection-Green woodcut products are UV-resistant, radiation-free, antibacterial, and free of harmful substances such as formaldehyde, ammonia and benzene, which meet the national and European standards and are the top environmental protection standards in Europe. After renovation, it is non-toxic and tasteless, and you can move in immediately. They are truly green products.

(2) Stability-Green wood carving products are anti-aging, waterproof, moisture-proof, mildew-proof, anti-corrosion, moth-proof, termite-proof, effective flame retardant, weather-proof, anti-aging, heat insulation and energy-saving, and can be used in outdoor environment with great climate change for a long time without deterioration, embrittlement and lasting performance.

(3) Safety-Green wood carving products have the characteristics of long-term use in water, high strength and water resistance, strong impact resistance and no cracking.

(4) Comfort-Green wood carving products are sound-proof, insulating, oil-resistant and antistatic.

(5) Authenticity-Woodcut products of Greenwood are natural and beautiful, elegant and unique in shape, with wood texture and natural texture of solid wood and a simple feeling of returning to nature. It pays attention to the design and the application of detail texture and color texture of product materials: it operates a dynamic wood grain vitality and friendly spiritual environment atmosphere in the oriental space. Products can also be designed through different design forms.

(6) Convenience-Green wood carving products can be cut, sawed, planed, nailed, painted and glued. The products have excellent industrial design, and most of them are designed by socket, bayonet and tenon. So the installation is time-saving and labor-saving, and the speed is extremely fast. Simple installation and construction.

(7) Uniqueness-Green woodcut products are made of wood fiber and plastic by mixing, heating and injection molding. No materials containing benzene, formaldehyde, cyanide and other harmful substances are used, thus avoiding decoration pollution, maintaining, pollution-free and energy-saving.

(8) Recyclability-Green wood carving products are recyclable, which is a unique feature.

(9) Diversity-Green Wood Floor Series is suitable for common laying and floor heating.

(10) Energy saving-Green woodcut products have the characteristics of attracting energy saving, which can save up to 30% indoor energy.

(1 1) The product range is wide -GreenerWoodCeiling products are suitable for living rooms, hotels, entertainment places, bathrooms, offices, kitchens, toilets, schools, hospitals, sports grounds, shopping malls, laboratories and other environments.