How to clean the shower nozzle

Abstract: Hot water flows through the pores of the shower for a long time, and its scale will attach to the water outlet. If the scale accumulates to a certain extent, it may block the shower outlet, so it needs to be cleaned regularly. The method of cleaning the shower head is simple. First, remove the water pipe connected with the shower nozzle, then clean the shower nozzle repeatedly with water, and finally install the shower nozzle. When cleaning, be careful not to wipe the surface of the shower with hard objects such as steel balls to avoid scratching the surface of the shower. Next, let's look at Bian Xiao. How to clean the shower nozzle

1. To clean the shower nozzle, first remove the water pipe connected with the shower nozzle, then flush the shower nozzle with tap water, then fill it with water, block the water outlet, shake it vigorously, and then quickly release dirty water. This method can be cleaned repeatedly. This method is applicable to all nozzles. If the shower head can be detached, it will be easier to clean the inside. Just remove the shower head and wash it with tap water.

2. It is also important to pay attention to the cleanliness of the shower every day, so you don't have to wait until the shower is blocked before taking measures. After using the shower every day, you can clean the water outlet of the shower with a towel to avoid leaving scale in the shower hole, which will block the shower hole for a long time.

3, clean with toothpaste, toothpaste has very good decontamination performance, and removing stubborn impurities is a good choice. The operation method is to take off the shower head first, apply toothpaste, brush it slowly for about 5 minutes, and then rinse it with clear water, which can play a very good cleaning effect.

4. Soak in vinegar If your shower head is blocked for a long time and a large number of small holes are blocked, you can prepare some white vinegar and pour it into the basin so that the shower head can be soaked. Soak for about ten minutes to remove the scale in the shower head.

5. Use a lubricant. If the metal of the shower head rusts and causes serious blockage, then use rust removal rust lubricant. Rust removal lubricant has very good affinity and permeability with metal, which can separate rust layer from metal layer and leave a protective film.

What should I pay attention to when cleaning the shower head?

1. In order to ensure that the nozzle is not blocked, clean the nozzle every three months or half a year. Do not use strong acid when descaling, so as not to corrode the surface of shower head.

2, don't use hard objects such as steel balls to wipe the surface of the shower, so as not to scratch the surface of the shower.

3. Do not disassemble the shower for maintenance, improper disassembly will damage the appearance and internal structure of the product.