Cleaning method of faucet of hotel washing machine

Hotel washing machine is a vital equipment, which helps you to provide the best laundry service. However, if the washing machine is not properly maintained and cleaned, there may be some problems, such as poor washing quality, insufficient washing water flow or impurities. One of the most common problems is that the faucet is not thoroughly cleaned, which may affect the water quality and water supply. Here are some ways to clean the faucet of the hotel washing machine.

1. Unplug the tap

First turn off the water supply, and then slowly unscrew the faucet with a wrench. Once the faucet is taken out, it is necessary to clean up the dirt and debris on the body; You can use a soft brush or toothbrush, or blow it clean with compressed air.

2. Clean the faucet parts

Take out all the parts on the faucet and clean them with warm water. In order to remove scale and other possible residual dirt, vinegar water can be used to solve the problem, and the ratio is 1: 3. Dry the cleaned parts in the sun.

change a part

Check the rubber washer or other vulnerable parts in the faucet. If it is aged, worn or damaged, it needs to be replaced in time.

4. Reinstall the faucet

Install a new faucet on the machine or reinstall the cleaned original faucet. Ensure that all parts are properly installed and tightly connected. Turn on the water supply, check whether the water supply is normal, and judge whether the faucet has been thoroughly cleaned.

In a word, the faucet of the hotel washing machine is a necessary part of maintenance and cleaning. Cleaning according to the above steps can prolong its service life and ensure high-quality washing service.