What are the functions of waterbed room and how to maintain waterbed?

Waterbed rooms have many advantages, so many owners want to buy them home, but they should also pay attention to the maintenance after using them for a period of time. So, what is the function of waterbed room and how to maintain it? Look at the introduction below. Some round beds are common in hotels, and sometimes they are equipped with waterbeds. This is also to make passengers feel better. Because waterbeds have many benefits, many owners want to buy them home, but they should also pay attention to the maintenance after using them for a period of time. What is the function of waterbed and how to maintain it? Let's take a look at the following introduction.

What is the function of waterbed room?

The design of the waterbed conforms to the curve of the human body, reducing the pressure on all parts of the body, especially the joints. It can treat or relieve some back pain. For some people who stay in bed for a long time, it can also reduce the risk of bedsore. The waterbed is scientifically designed and subjected to strict pressure test before leaving the factory, so it will never leak. The electronic constant temperature system of the waterbed can keep the bedding dry for a long time without absorbing moisture, which not only does not cause rheumatoid arthritis, but also has a certain preventive and therapeutic effect on rheumatic diseases.

The fatigue of mental workers, as long as it is caused by the decline of nerve cell activity and the accumulation of metabolic waste in the body, is called ordinary sleep mode? Attitude sleep? , can not effectively eliminate this kind of fatigue in a short sleep cycle. Water bed can produce good hot compress effect, warm effect can promote blood circulation, restore cell vitality, and quickly and thoroughly remove metabolic waste in the body.

How to maintain the waterbed?

1, the computer thermostat is used to adjust the water bed temperature, which is generally controlled at 25? 37℃, the temperature can be gradually increased from low grade to high grade when it is used for the first time. The thermostat has been strictly tested before leaving the factory, so users should not open it without authorization during use. The thermostat can be turned off in summer, but because the natural temperature of water is around 26℃, there is still a certain temperature difference with the outside temperature. When sleeping; You should also put on sheets to avoid catching cold (people who are afraid of cold can also adjust the temperature appropriately).

2. The hardness of the waterbed can be adjusted by the gas edge according to everyone's needs, and it will be hard if it is inflated more; However, at the beginning of installation, the bubbles in the waterbed should be discharged through the exhaust hole to avoid making noise during sleep and affecting sleep.

3. Electronic temperature-regulating waterbed is a kind of high-grade bedding, which should be carefully cared for and used scientifically. At ordinary times, it is necessary to pull the anti-slip sleeve and spread the bedspread to avoid scratching or puncturing the waterbed by strong external force. When you move, you should also let the water out of the waterbed, if you buy a house.

4. Once the water bed is installed, don't easily open the water inlet cover, because there is a certain pressure in the water chamber, and the water will overflow after opening the cover. The maintenance of the waterbed is very simple, so pay attention to check whether there is air leakage or water leakage. Pay attention to indoor thermal insulation in winter, and keep the water bed temperature. After about five years of use, the water can be drained and re-injected according to the instructions.

What is the function of waterbed room and how to maintain waterbed? After reading the introduction above, you should already know the answer. Waterbed rooms can make people sleep more comfortably and prevent arthritis. There are many benefits, so it is becoming more and more popular. However, there are maintenance methods and attention should be paid to better use of waterbeds.