Understand the cleaning and cleaning precautions of crystal lamps, and make your crystal lamps shine with stars.

Many villas or public places will install crystal lights, which are high-end and beautiful. However, when the crystal lamp is used for a long time, the surface will be stained with dust, which will make the crystal lamp no longer shine and lose its luster. At this time, it is necessary to clean the crystal lamp. There are many pendants on the crystal lamp with different sizes, and dust accumulates everywhere, which is more troublesome to clean up. In order to maintain the long service life of crystal lamps, it is necessary to understand the precautions for cleaning crystal lamps. Let's talk about this problem.

1, use special cleaning agent for crystal lamp.

Different crystal lamps use different accessories and different cleaning agents. Crystal lamp pendant and metal fittings are made of different materials, so different cleaning agents should be used when cleaning.

Do not use alcohol when cleaning metal fittings. Alcohol-containing cleaning agents will destroy the protective film outside the electroplated metal layer, which will affect the smooth surface effect of accessories for a long time. The special cleaning agent for crystal lamp can protect the surface of crystal lamp, and the pendant of crystal lamp cannot be cleaned with alcohol, otherwise it will lose its luster easily. Choosing suitable cleaning agent is helpful to prolong the service life of crystal lamp.

Step 2 pay attention to safety

Pay attention to cut off the power supply before cleaning the crystal lamp to prevent leakage and other dangerous situations during cleaning. Crystal lamps are generally installed higher, and small crystal lamps at home are easier to clean, and the height is not very high. If you lift a high villa or a large public place, the crystal lamp used is also very large, and the house is lifted very high. At this time, you should pay attention to the personal safety of the cleaning staff. Use ladders, etc. Stay firm.

The light bulb should be removed, cleaned and then installed. The light bulb must be dried and then installed to prevent water stains from conducting electricity. When installing the light bulb, it should be strong. If you turn it too loosely, it will easily lead to unstable contact, and if it is too tight, it will easily twist the light bulb.

3, check the connection parts

Crystal lamp consists of pendant and connector. When cleaning needs to be removed, it should be removed one by one. When disassembling, check whether the connecting parts are rusted and whether the connection is firm. If the connection is loose, be careful to tighten the screws. If the screw is damaged, it should be replaced in time.

If the pendant beads are twisted and knotted, they should be straightened. If the pendant is missing, it should be filled in time. If the hanging ring at the joint of the pendant is rusted, it should be replaced.

4. Scrub the crystal to keep the lamp body balanced.

There are many crystal pendants on the crystal lamp. When scrubbing the crystal pendant, use soft cleaning tools and special cleaning agents to wipe it. When cleaning, don't drag the pendant down hard, which will easily break the beads and cause danger.

Don't rotate when cleaning the crystal lamp, pay attention to keep the lamp body balanced. If you need to take off the pendant, keep the balance left and right. Don't completely remove one side and then remove the other. Dismantle it evenly to avoid damaging the crystal lamp. Especially the cleaning of large crystal lamps, it is very important to pay attention to the cleaning of crystal lamps.