What is the standard size of the water label?

The standard dimensions of water mark are: 500MMx700mm, 600MMx900MM, 60CMx80CM, 70CMx80CM.

The water label consists of a panel, side rails and plastic fasteners. Plastic fasteners belong to the application in production, so I won't introduce them in detail today. The panel is generally horizontal, the side rails are generally vertical, and the length of the panel and the side rails is 3 meters or 6 meters. The slit of the cutting knife should be considered in the design, so as not to lose materials as much as possible and reduce the production cost.

The panel is horizontal and can be cut at will, so the height is determined by the contour you choose. Among many profiles, after being eliminated by the market, there are several series commonly used now: the height of series 30 is 30mm, 60mm, 90mm, 120mm, 150mm, 180mm and 240mm.

Signboard:

Arc signs are improved on the basis of water signs. Because of its strong three-dimensional sense and convenient use, it is a new bright spot in recent years. Curved cards can be placed horizontally or vertically. Taking the horizontal arc card as an example, this paper discusses the problems that should be paid attention to in design. Arc brand is divided into two types: A and B. The height of A mold is 29mm, and the height of B mold is 32 mm ..

There are six specifications commonly used for Type A: 157mm, 23 1mm, 3 17mm, 445mm, 605mm and 765mm. Now that the width has been fixed.

Here is a formula, height H=(29+3)mm*N-3mm. 29mm is the height of the mold, and 3mm is the gap between the molds. Choosing the right height means choosing the right modulus n. ..

Refer to the above content: Baidu Encyclopedia-Water Brand