What materials are best to choose when buying hotel furniture?

What material is good for hotel furniture customization - wood particle board

Particle board is also called particle board. It is made of long wood fibers in the middle and fine wood fibers on both sides, which are pressed under high temperature and high pressure to form a board. , its base material is processed from tree trunks, branch chips or shavings from artificial forests and natural forests. Common particle boards are 18mm and 25mm. Its advantages are small expansion rate and strong stability. The disadvantages of choosing this material for hotel furniture customization are that it is easy to make, has large quality differences, and is difficult to identify. The edges of the particle board are rough, easy to absorb moisture, the density is loose and easy to loosen, the nail holding power is low, the visual frizzy, and the amount of glue is large. Only high-quality imports The particle board only meets the high European E1 level standards, and the formaldehyde content is less than 0.9mg/100m.

What material is good for hotel furniture customization - melamine board

The full name is melamine impregnated film paper faced artificial board. It is made by soaking paper with different colors or textures in melamine resin adhesive, drying it to a certain degree of solidification, paving it on the surface of particle board, medium density fiberboard or hard fiberboard, and hot pressing it. Decorative panels. At present, the base materials used for panel hotel furniture customization on the market are all this type of boards. The base materials are divided into melamine particle board and melamine density board. The appearance design of melamine board has more changes and is more personalized. It is an optional material for customized hotel furniture. However, the environmental protection requirements for the board are very strict and must meet the European E1 level standard.

What material is good for hotel furniture customization - plywood

It is also called plywood and is commonly known as thin core board in the industry. Thin boards with three or more layers, which are made by rotary cutting logs into veneers or planing wood into thin wood, and then gluing them with adhesive. Usually an odd number of layers of veneers are used, and the fiber directions of adjacent layers of veneers are arranged perpendicularly and glued together. The plywood is available in 6 specifications with different thicknesses.

What material is good for hotel furniture customization - fiberboard

Fiberboard, also known as density board, is made of powdered wood fiber pressed at high temperature. It has good surface smoothness and good stability. With high load-bearing capacity, this material is superior to particleboard in strength and hardness when customized for hotel furniture. The internal structure of fiberboard is uniform, the density is moderate, the dimensional stability is good, and the deformation is small, so it has strong nail-holding power and can be disassembled and assembled many times for easy transportation. Moreover, the fiberboard faced with melamine has the characteristics of moisture-proof, anti-corrosion, wear-resistant, high-temperature resistance, etc. It does not require post-processing and has low formaldehyde content. It is a good material for hotel furniture customization, but the processing precision and craftsmanship requirements are high, and the cost is high.

What materials are good for hotel furniture customization? The fifth type of blockboard, also known as large core board, is a board made of natural rotary cut veneers and solid wood panels that are glued and hot-pressed. There are two types of blockboard processing techniques: machine-joined and hand-joined. Manual construction involves manually inserting wooden strips into the plywood. The wooden strips are subject to poor extrusion pressure and cannot be cut and processed. It is only suitable for partial decoration sub-projects. , such as making base mats for solid wood floors, etc. The machine-assembled panels are subject to greater extrusion force, with extremely small gaps, smooth splicing, uniform load-bearing force, and are not easily deformed after long-term use. Its main uses include furniture, doors, windows and covers, partitions, false walls, heating covers, curtain boxes, etc. It is also a good choice for hotel furniture customization.