Traditional Culture Encyclopedia - Hotel accommodation - Introduction of carpet cleaning method of high foam carpet cleaning machine
Introduction of carpet cleaning method of high foam carpet cleaning machine
First, how to use high foam carpet cleaner?
1. First clean the carpet with a vacuum cleaner.
2. Dilute with water according to 1: 30 (1: 20 for heavier stains).
3. Put the prepared solution into the bubble box of Pino carpet cleaning machine for direct use.
4. After carpet cleaning, when the foam is slightly dry, use a vacuum cleaner to suck the dirt together with the foam.
Second, the carpet cleaning method
If you want to clean the carpet at home easily, you should clean it every day in your daily life. Daily cleaning of carpets at home is as follows:
1, which needs to be cleaned up in time. Carpets need to be vacuumed every day. Don't wait for a while before cleaning. Only by regular cleaning can we ensure that the carpet is not stained by stubborn stains.
2, need to clean evenly. Because the carpet is laid in different positions, it is necessary to adjust the position of the carpet after it is used for a period of time to ensure the uniform wear of the carpet. You need to pat the carpet gently where there are bumps, or iron it gently with a steam iron.
3. Master decontamination methods. Ink stains can be wiped with citric acid; If it is coffee or cocoa, tea stains can be removed with glycerol; Fruit juice can be removed with cold water and a small amount of dilute ammonia solution; Paint stains can be made into porridge with gasoline and washing powder, coated on the paint at night and cleaned with water the next day.
4. Remove foreign bodies in time. If some light substances such as fluff and paper scraps fall on the carpet, the vacuum cleaner can solve it. If you accidentally break a piece of glass on the carpet, you can stick the broken glass with a wider tape; If the broken glass is powdery, you can stick it with cotton dipped in water and then vacuum it.
5. When the carpet has burnt marks, if it is not serious, you can brush off the burnt parts with a hard brush or nickel brush. If it is a serious scorch mark, press it with a book and comb it when it is dry.
What I recommend to you today is about the use of high foam carpet cleaner, so how to operate the specific products? How can we achieve the purpose and effect of cleaning and maintenance without damaging the carpet? What I recommend to you today is these aspects of information. From this, we can know that the carpet cleaner with high foam should be vacuumed with a vacuum cleaner before use, and then diluted with water according to a certain proportion, and the solution can be put into a special cleaner before use.
- Related articles
- Will people who drive from Yuanmou to Changde, Hunan be isolated?
- Looking for affordable three-and four-star hotels in Beijing
- Which magazines have interviewed Wang Xiaofei exclusively recently?
- Hongqiao Railway Station 17 Line takes a taxi to Haiweide Hotel. How much is the taxi invoice?
- The complete works of e-book txt on sc side.
- Jiulianshan Hot Spring Self-Driving Tour Jiulianshan Hot Spring Self-Driving Tour Route
- Accommodation inside Huazhong University of Science and Technology
- Jay Chou Concert Plan in 2022
- When is the best time to travel to Australia?
- How far is Phoenix Airport from Haiyongmao Hotel in the south?