Where are electronic patrol systems used?

General security (buildings, communities, hotels, villas, schools, factories, supermarkets, parks)

Routine security inspections install a built-in security camera on each different floor of the shopping mall and at important locations. For information buttons with different codes, security inspection personnel hold the reader to conduct inspections according to the predetermined time and route. At the same time, they touch the information button installed on the line with the reader. The reader will record the location and time of arrival. Managers can transfer the recorded information in the reader to the computer, and the inspector's inspection location and arrival time can be clearly displayed on the screen. According to the predetermined inspection shift and time requirements, the computer software will automatically count On-time, late and missed detection reports are displayed on the computer screen and can be printed through a printer, providing managers with important management information. Since the security personnel must arrive at the inspection location at the designated time to read the information button and obtain the record, and the information button cannot be copied, it is impossible for the inspection personnel to be lazy or cheat. Managers can evaluate inspectors based on inspection reports and give corresponding commendations or rewards and punishments. This will help improve the initiative of inspectors and improve the scientific nature of management, so as to promptly discover safety hazards and reduce safety risks. purpose of the accident. The shopping mall safety intelligent inspection management system can also be used in different occasions such as product warehouse inspections, transportation line time management, important equipment inspections, and even employee attendance checks on and off work. The cost-effectiveness of investment can also be improved by using one machine for multiple purposes.

2. Fire and explosion prevention (oil fields, oil depots, natural gas, coal mines, grain depots, forestry)

Safety maintenance work in mines has become increasingly important, and any faults discovered must be corrected Any delay will cause huge losses. However, the current mine inspection and inspection management methods cannot easily ensure that the inspection work is completed on schedule with quality and quantity (such as whether inspections are missed or inspections are not carried out according to the prescribed time). Therefore, it is necessary to introduce new means to improve. The "inspection management system" is exactly what is needed to provide modern management means and maximize the existing human and material resources. Install it on the inspection route of mining personnel or in key locations (such as mine tunnel leakage, exhaust system, etc.), and install an information button every other section. It can be installed on stone pillars and wooden piles and is not easily damaged or lost. Mining workers carry information collectors and click the information button with the collector to record when and where the workers arrived. After the mining personnel conduct the safety inspection, they bring their inspection devices back to the computer center. Under the dedicated inspection software system, the list will be automatically analyzed to reflect the work of the security inspection personnel. Combined with the records of the security inspection personnel, the mine Gain a deeper understanding of the situation, perform timely maintenance on equipment, eliminate hidden dangers, and establish an operating mechanism for safe production.

3. Road traffic (roads, railways, airports)

For example, in order to strengthen road administration, investigate and deal with various illegal behaviors of encroaching, utilizing, occupying, and excavating roads and highway facilities in accordance with the law, To protect road property and road rights from infringement and ensure that roads are intact, safe, and smooth, in principle, road administration personnel should spend no less than 2/3 of the time on road inspections every month. Inspection personnel should record the inspection status in a timely and detailed manner. The 204 National Road Administration Inspection System was put into trial operation. The system is mainly composed of computer terminals, information buttons, patrol detectors and software systems. Each information button has a unique corresponding code and is installed on different road sections. The patrol personnel inspect the section and connect the patrol detector with the information After the button is docked, the time and other information are automatically recorded. The information collected in the inspection device can be input into the computer to form an electronic inspection database. The characteristic of this system is that the inspection time and points are predetermined, and inspectors cannot add or delete them on their own. It can accurately and timely check the inspection status of road administration personnel through computer networking technology, thus modernizing the supervision and management of road inspection work. , scientific track.

4. Lines and pipelines (telecommunications, power lines, water supply, heating, oil, natural gas pipelines)

Inspections on the equipment status of mobile base stations are carried out at each base station site respectively. Install an information button with different codes inside. After the base station inspector arrives at the location with a reader and inspects the base station facilities, he touches the information button and the reader will record the arrival location and time.

Managers can transfer the recorded information in the reader to the computer, and the inspector's inspection location and arrival time can be clearly displayed on the screen. According to the predetermined inspection shift and time requirements, the computer software will automatically count The on-time, delayed and missed inspection reports are displayed on the computer screen and can be printed through a printer, providing managers with important management information. The mobile communication intelligent inspection management system can also be used in different occasions such as equipment inspection in the computer room, inspection management of line operators, and even employee attendance at get off work. The cost-effectiveness of investment can also be improved by using one machine for multiple purposes. Telecom application areas: a. Inspection of telecom call lines b. Inspection of telecom computer rooms, switches, and important communication facilities c. Inspection of telecom public telephone booths and card-type public telephone equipment.

5. Military and police patrols (public security, border defense, prisons, banks)

For example, traditional security patrols, the patrol routes, time, frequency, and density are all unreasonable, and the patrol personnel They can't distinguish the priorities and can't find the key points. They just patrol based on their experience. The police force is wasted repeatedly and often gets half the result with twice the result. In addition, some patrol officers have a weak sense of responsibility. They are passive and slack in their work. "" coping mentality, resulting in patrol work with great blindness and passivity. The "electronic patrol" system can effectively supervise and manage patrols. It can accurately record the patrol time, frequency and routes of patrol personnel. It has the characteristics of flexible wiring, simple operation and strong pertinence. It is useful for supervising, standardizing and improving public security agencies. The security patrol work is of great reference value. At the same time, the "electronic patrol" system can rely on computer information networks to achieve full sharing of resources. It has strong vitality and broad development space. It is a favorable carrier for public security organs to strengthen patrol prevention work in the new era.

6. Industry applications (hospital/nurse duty rounds, postal and telecommunications/letter delivery, bus/scheduling)

For example, a bus with different built-in functions is installed on each bus. Each station dispatcher holds an information button for the number. When the bus leaves or arrives at a certain stop, the dispatcher touches the information button installed on the bus with the inspection device. The device has a memory function and will automatically record the exact time when the bus arrives at the site. When returning to work, the dispatcher will hand the reader to the manager. The manager will use the communication cradle to connect to the microcomputer to transmit the data information in the patrol device. In the microcomputer, the actual working conditions of the buses at each station can be clearly displayed on the screen. If necessary, the printer can be used to generate various reports and monthly reports at any time. Provide important management information to decision makers.

Scheduled and fixed-point management of postal letter pick-up and delivery, postal trains, postal savings vehicles, and mail transportation; this system helps to overcome loose management of postmen and postal staff, delays, and missed posts, etc. This phenomenon enables managers to easily fulfill their management responsibilities, and helps to scientifically assess the labor performance of staff, eliminate hidden dangers, prevent them before they occur, and effectively improve the quality of communication and the safety of postal operations. After using this system, business leaders can simulate work on the computer screen, set work routes and times, and print work charts. When employees are working, they do not have to check the work status of employees from time to time. By using this system, they can know the status of each employee on the job. Personnel inspected what location at what time, thus achieving precise quantitative management of postal delivery work.