What is ZTE indoor wireless access point? How to use it?

Ordinary indoor distributed wireless access points ZXV 10 W8 15 V3

ZXV 10 W8 15 V3 is a high-end indoor distributed 500mW high-power AP specially designed for operators' wireless broadband services, which supports power over Ethernet (PoE), is deployed in WLAN wireless coverage hotspots, and can access MAN through LAN. Users can access the Internet through WLAN signal of hotspot AP to realize authentication and billing.

ZXV 10 W8 15 V3 has the functions of ordinary WLAN AP, supporting bridge forwarding (or routing mode) of user data, local management function and remote management function based on element management system. Equivalent omnidirectional radiation power of RF output

ZXV 10 W8 15 V3 is suitable to be erected in WLAN hotspot areas, providing users with WLAN access function and providing powerful wireless access solutions for basic telecom operators, ISPs and industrial enterprises.

powerful

It conforms to the IEEE 802. 1 1/b/g protocol and has the ability to communicate with 802. 1 1g terminals at the same time.

Support power saving mode

Support wired link integrity function, when the uplink wired link is interrupted, it should be able to automatically turn off wireless signal transmission.

Support bridge mode data forwarding and transparent transmission of Layer 2 packets (such as PPPoE).

Support multiple SSID functions.

Support automatic power adjustment and automatic channel selection.

Support broadcast, DHCP, DNS and static IP address discovery AC functions of thin AP.

Support users to roam on the second and third floors.

Hybrid access supporting multiple security modes

Support user-based and traffic-based load balancing.

Support illegal AP detection

Support IEEE802. 1Q VLAN function.

Support IGMP snooping and meet the requirements of IGMP V2 version (RFC2236).

Support SNTP protocol

Support WLAN QoS function requirements, that is, support IEEE 802. 1 1e and WMM protocols and the QoS mechanism specified by ITU-T Y. 129 1.

Support access control based on MAC address and basic security requirements of WLAN interface.

Support local management and remote management. Support access to logs and security logs.

Support 10/ 100Base-T interface, and meet the requirements of IEEE802.3-2005 standard, and support MDI/MDI-X to automatically detect the connection network cable.

Support Ethernet remote power supply, in line with the provisions of IEEE 802.3af

Software versions are fat and thin, and software switching between fat mode and thin mode is supported.

Support 64-bit/128/ 152-bit WEP encryption function; WPA2 WPA，PSK WPA，WPA2 PSK

Support 802. 1x extended authentication mode.

Support IPV4/IPV6.

In fat mode, authentication and NAT are supported.

High efficiency, energy saving, stability and durability.

User capacity suggested concurrent/maximum number of users supported: 30/500.

Coverage range is 0 ~ 150m indoors, without blind area coverage, and 0 ~ 350m outdoors.

The power adapter supporting DC 12V@ 1.2A output supplies power, and the average power consumption of the whole machine is about 5.5W

Support standard PoE power supply, the average power consumption of the whole machine is about 7.5W

Mean time between failures: 100000 hours or more.

Working temperature-10℃ ~ 50℃

Storage temperature -40℃ ~ 60℃

5 ~ 95% humidity, no condensation.

Carrier-level network management

Support ZTE unified network management platform

Web page configuration

SNMP agent (realize standard MIB and vendor-defined MIB to complete alarm trap function)

Support version remote upgrade

Support remote upgrade of configuration files.