What's wrong with the wallboard treatment?

What kind of decorative board should be used when decorating this wall? Let's take a look at the method of wallboard treatment, or what kind of wallboard treatment is better, such as what's wrong with wallboard treatment?

Treatment method of wall plank 1. Wooden wall decoration is rough, clean, concise and cautious, and the decoration must be large to achieve the overall effect. Usually the wooden keel is embedded in the wall first. The cross section of the keel is 50mm×25mm, and the clearance of the keel is about 460 mm ..

2. Fix the board or plywood on the keel with nails. Before nailing the nail head to the board, the nail head should be leveled and sealed with nails. Fix the board or plywood, and then paint it for surface treatment.

There is also a wall decorative board, which is an indoor decorative wood product. The connecting plate of the groove and the convex edge of the connecting plate are respectively bonded on the surface of the connecting plate, which swings on the upper and lower surface layers of the casting plate and is arranged on two convex strips on one side of the wooden board.

4. Wall decoration The wall can be called the wall decoration of the pen. People who are completely different from the traditional decoration style feel a brand-new feeling.

Wall plank treatment type 1. The fireproof decorative board is a mixed board with a certain proportion of fiber material, lightweight aggregate, adhesive and chemical additive siliceous raw material or calcium as the main components.

2. It is a kind of more and more new material, which is used for fire prevention. The construction of fire-proof board has the requirement of connecting glue, which is more expensive than facing fire-proof board, with good quality and high price. The thickness of fire-resistant board is usually 0.8 mm, 1 mm and 1.2 mm.

Precautions for wallboard treatment 1. The preservation of the wooden board wall plaque can draw a panel that was once so easy to convert, and pay attention to dryness and ventilation.

2. The operation of materials should be carried out on the platform, not directly on the ground.

3. The decorative plate and keel should not be hard.

4. After the wooden decorative board is installed, the surface is free of defects and scratches, and the scratch-free cap is exposed for 4 days.

5. Ensure that the installation position is correct and there is no deviation. When cutting, cut the decorative board, the joint is hard, and there is no extra gap between the walls.

The above is an introduction to many methods of wallboard treatment, as well as the types and styles of wallboard treatment, including matters needing attention or some problems in wallboard treatment.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~