Using hotel decoration acceptance standard to detect hotel decoration

Nowadays, people often need to go out. Choosing a hotel is one of the necessary preparations for people to go out. Even when they go out, the pursuit of life comfort has never weakened. When the hotel decoration acceptance standard is used to test the favorable evidence of a hotel decoration level, how to carry out the hotel decoration acceptance according to the hotel decoration acceptance standard? It can be tested from the following aspects: drainage function, tile laying and lamp selection.

A drain pipe with concealed or buried drainage function should be irrigated before concealment, and the irrigation height should not be lower than the top or bottom ground of the bottom sanitary facilities. Moreover, plastic pipes for drainage must be installed according to the design requirements and expansion joints. If there is no design requirement, the expansion joint spacing should not exceed 4m. In high-rise buildings, drainage plastic pipes should be provided with fire rings or fire-resistant shells according to the design requirements. The main drainage riser and horizontal main pipe need to be checked for passing through the ball. The diameter of the ball is more than 2/3 of the diameter of the drain pipe, and the passing rate of the ball needs to reach 100%. The reserved position and size of the drain outlet meet the design requirements. Please pay special attention to the following three points:

1, waterproof materials have certificate and quality inspection report.

2. The choice of waterproof materials meets the market design requirements or mature products.

3. Water storage test after water storage: floor drain height 100 mm, and use ball plug (or cotton ball) to prevent electric leakage. The shallow water level is 50 mm and the water storage time is 48 hours.

Second, the type, pattern, color and performance of ceramic tile laying must meet the design requirements. Waterproof glue, cement materials and construction design requirements of facing tiles conform to the product standards and technical methods in the current national acceptance standards for hotel decoration, and should be closely fitted when laid.

Third, the choice of lamps The lighting effect of a hotel can reflect the grade of the hotel and also give guests a unique accommodation experience. In the acceptance standard of hotel decoration, there are relevant requirements for the model, style, shell color and bright color of lighting lamps. The installation and electrical wiring of lamps and lanterns should comply with the design requirements and the location regulations of installation dimensions. And the lampshade will be closely attached to the ceiling or wall. At the same time, it is necessary to ensure that the light bulb can be switched on and off normally and the lighting angle meets the design requirements.

The acceptance criteria of hotel decoration are very complicated. The above introduction is just a few of them, so we should do it carefully and not miss a detail.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~