Many people choose seamless tiles. What is the quality of seamless tiles?

Now the decoration technology is getting stronger and stronger. The floor can be made seamless. Many people choose this kind of seamless floor for beautiful decoration, but is it really seamless? In fact, what is lacking is that many seamless floors will still bump after long-term use. First of all, seamless floors do have many advantages. You can choose your favorite texture according to your own preferences, so there are still many young people who choose this seamless floor. Because seamless floor has two kinds of materials, it also has different effects and characteristics. Moreover, the windless floor is not really seamless, but its gap is relatively small, and then the fit between layers is relatively high.

But the seamless floor will also rise, or the gap will increase. Because the floor may also have some expansion problems, if the expansion coefficient is not calculated well, then the analysis will increase or bulge. Although the general floor will not have such a problem, it has a lot to do with your daily use. If there is water on the floor all the time, it may increase the probability of its expansion. Therefore, decoration is very important, and some problems should be paid attention to when maintaining. Generally speaking, it is best to have a seamless floor. Because seamless floors can make us look beautiful. And it will be more convenient to clean. Therefore, if you can choose high-quality seamless floor, it is recommended to choose seamless floor. Of course, before decorating, you should fully understand the relevant knowledge of seamless floor.

On the long road of life, people always have to be loose and tight, otherwise there will be many problems in the later period, as well as the problem of laying tiles. Otherwise, problems such as hollowing, cracking and falling off of tiles will inevitably occur in daily life. The seamless bonding method is only determined by the opposite seam. Therefore, when seamless tiling means tiling, the adjustment range is within 1- 1.5 mm, without adding a cross locator. If the brick surface is flat, it can be pasted directly without cross locator. If the deviation is weak, it can be adjusted by borrowing toothpicks. Borrowed the technical term of ceramic tile. However, the toothpick borrowing method does not use toothpicks, and it can be thinner than toothpicks, such as the thickness of scrap tape, which is more accurate than toothpicks. The method of seam sticking needs a cross locator to determine the size of the seam. Generally, there is a 1.5 2.0 2.5 cross locator.

The brick surface pasted by joint sticking method has a strong stereoscopic impression and a strong sense of concavity and convexity, but the amount of joint filler will increase a lot compared with that in seamless brick. No seamless brick said that the tile itself may double, because the tile itself will have a cooling process after firing, which will lead to slight inclination or slight size error, so it is necessary to adjust the tile through appropriate gaps when paving. For decorative effect, seamless tile paving will be more beautiful, so some people will choose seamless tile paving, or adjust tile problems through small gaps, so that the surface will not have a great sense of gap visually. It may be very effective, but it will have some influence in daily life. As mentioned above, tile laying can't be seamless because it needs adjustment. If the gap is too small, the dust and dirt falling from the gap can't be treated later. Moreover, different ceramic tiles have different materials and properties, so the gap size that may be reserved in the process of tile paving will be different, which should be handled according to the specific situation.