Is electric glass sliding door easy to use? How to install electric glass sliding door?

I believe everyone has seen electric glass sliding doors, and these sliding doors are generally installed in major office buildings, large hotels and banks. Therefore, electric glass sliding doors can automatically open and close, which is not only convenient. People come in and out, and the indoor temperature can be maintained. So are electric glass sliding doors easy to use? How to install electric glass sliding doors? Next, let’s take a look with the editor!

1. Is the electric glass sliding door easy to use?

1. First of all, the electric glass door is quite easy to use. It is very convenient to open and close. It is relatively practical and very humane. This way, it is possible to avoid the need for a dedicated person to open the door, and it also saves a lot of time and manpower, making people at the entrance and exit very refined and elegant, and instantly improving the style of the indoor space.

2. Electric glass sliding doors can not only increase space, but also better save air conditioning energy, thereby reducing some noise. Windproof and dustproof are a widely used glass sliding door. Generally They are all used in larger hotels, restaurants, banks and hospitals.

2. How to install an electric glass sliding door

1. When installing an electric glass sliding door, you must first place the upper and lower door axes on the same vertical line. The glass door must use steel The beams of the structure serve as the skeleton, and the upper shaft must be on the beams when welding, because the upper door shaft belongs to the center of gravity of the entire glass door, so it must be strong. It is forbidden to use the upper beams, thin boards, wooden keel structures, and the upper door shafts are made of wood. The connection can only be installed and fixed with self-tapping screws, so the door is opened frequently, and the upper door shaft may easily fall off if it takes too long.

2. When installing the floor spring, a rectangular groove must be opened on the original ground. The surrounding areas must be larger than the floor spring. Its base is generally 10 mm. Use high-grade cement to fill it. The mortar plays a firming role. It is recommended that after the floor spring cement solidifies for 48 hours, the glass door should be installed with a margin of 8-12 mm to prevent the glass door from rubbing on the ground when moving.

3. The upper and lower door shafts of the floor-elastic door must be seated at the core of the door frame. After the glass door is installed, it will be the center point of the door frame, which plays a beautiful role. After installing the glass, the distance between the upper door edge and the crossbeam should be 4-6 mm. This is to prevent the upper door shaft and the door clip from coming apart when the door slides.